Upgrade Instructions and Operation Manual Addendum 2010 NAVIGATION UPGRADE SD-CARD CNSD-110FM This software upgrade will result in changes to certain features and availability of information. While the changes are intended to improve the overall user experience for most users, Pioneer and its licensors disclaim any warranty or liability for damages in connection with such changes.
Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Important ! The screens shown in the examples may differ from actual screens. ! Actual screens may be changed without notice for performance and function improvements.
Chapter Precaution 01 Precaution ! Read the entire manual before upgrading the programme of your navigation system. ! This package is unique, and cannot be installed on more than one unit. ! Web-connected computer is required for online issuance of password. p SDHC Logo is a trademark of SD-3C, LLC. In case of trouble ! Should the navigation system fail to operate properly, contact your dealer or nearest authorised Pioneer Service Station.
Chapter 01 Precaution ! Items in different menus, screen titles, and functional components are described in bold with double quotation marks “ ”: e.g.) Displaying the “System Settings” screen ! Touch panel keys that are available on the screen are described in bold in brackets [ ]: e.g.) Touch [Settings]. ! Extra information, alternatives and other notes are presented in the following format: e.g.) p If the home location has not been stored yet, set the location first.
Chapter Precaution 01 Precaution Displaying power voltage “Power Voltage” on the “Status” screen will no longer appear.
Chapter 02 Licence agreement PIONEER CNSD-110FM THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER CORP. (JAPAN) (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Chapter Licence agreement laws and regulations of the Government. If the Software has been rightfully obtained by you outside of the Country, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of the Government and the laws and regulations of the jurisdiction in which you obtained the Software. 5 TERMINATION This Agreement is effective until terminated.
Chapter 02 Licence agreement TERMS AND CONDITIONS FOR TELE ATLAS DATA End User Licensing Terms THIS IS A LEGAL AGREEMENT (THE “AGREEMENT”) BETWEEN YOU, THE END USER, AND PIONEER and its licensors of Data product (sometimes collectively “Licensors”). BY USING YOUR COPY OF THE LICENSED DATA, YOU AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. 1 Grant of License.
Chapter Licence agreement 5 Termination. This Agreement will terminate immediately and automatically, without notice, if you breach any term of this Agreement. You agree that in the event of termination of the Agreement, you shall return the Data (including all documentation and all copies) to PIONEER and its suppliers. 6 Indemnity.
Chapter 02 Licence agreement 6 End User accepts the obligation to, on request, provide Ordnance Survey with information on what products and/or services containing and/or derived from the Licensed Tele Atlas Products they produce. 7 End User is liable to Ordnance Survey in the event of discovery of breach of the aforementioned contractual terms.
Chapter Licence agreement a End User's use of the Brand Icon Licensed Tele Atlas Product and any portion thereof, is limited to use solely for the purpose of enhancing the value and/or use of the spatial vector data furnished or made by Tele Atlas.
Chapter 02 Licence agreement a Tele Atlas® MultiNet® data of Austria. As of the Effective Date, the copyright notice is: “© BEV, GZ 1368/2003.” b Tele Atlas® MultiNet® data of Denmark. As of the Effective Date, the copyright notice is: “© DAV, violation of these copyrights shall cause legal proceedings.” c Tele Atlas® MultiNet® data of France. As of the Effective Date, the copyright notice is: “© IGN France.
Chapter Licence agreement 02 Licenses Licence agreement Engb 13
Chapter 02 14 Licence agreement Engb
Chapter Licence agreement 02 Licence agreement Engb 15
Chapter 02 16 Licence agreement Engb
Chapter Licence agreement 02 Licence agreement Engb 17
Chapter 03 About the database About the data for the map database ! Modifications related to roads, streets/highways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably, those modifications after that period are not reflected in this database. ! Regardless of existing and newly-built things, the data may be different from the actual condition.
Chapter Instructions for upgrading The navigation system upgrade process j 2 Get the password for authentication. = For details, refer to Getting the password for authentication on this page. j 3 Upgrade the software programme of your navigation system. = For details of the operation, refer to Upgrading the software programme and the map database on the next page. j 4 Check whether the upgrade was done properly.
Chapter Instructions for upgrading 04 2 Record the password that you received. You need to input this password accurately. Write down your password to avoid mistakes. 4 Touch [Yes]. Upgrade procedures ! NEVER stop the engine of your vehicle or turn off the power supply to the navigation system until the installation is completed. Turning the power off during upgrade process causes a malfunction or failure of the navigation system. ! No functions are available during upgrade process.
Chapter Instructions for upgrading Checking whether the upgrade was done properly Display “Service Information Screen” screen to compare the current version number with the previous one. 1 Press the HOME button to display the “Top Menu” screen. 2 Touch [Settings]. The “Settings Menu” screen appears. 3 Touch [System Settings]. The “System Settings” screen appears. 4 Touch [Service Information]. The “Service Information Screen” screen appears. 5 Check the version information.
Chapter 04 Instructions for upgrading 8 Make sure that the current Bluetooth firmware version is 2.50 and the new Bluetooth firmware version is 3.10. 17 Make sure that the current Bluetooth firmware version is 3.10 and the new Bluetooth firmware version is 3.11. 9 Touch [Yes]. Update starts. 18 Touch [Yes]. Update starts. 10 Wait until the upgrade process is complete. A message will appear after the update is complete. 19 Wait until the upgrade process is complete.
Chapter Changes on the upgraded programme By upgrading AVIC-F10BT with this product, functions and operations will be equivalent to AVIC-F20BT. Therefore, obtain the Operation Manual for AVIC-F20BT and use it as your primary reference. http://www.pioneer.eu AV functions The AV source screen design and operation procedure will be changed. p Refer to this manual for DVD-VR operation procedures. = For details of the operation, refer to Playing a DVD-VR disc on the next page.
Chapter 06 Playing a DVD-VR disc You can play a DVD-VR (DVD Video Recording Format) disc using the built-in drive of the navigation system. This section describes operations for DVD-VR discs. Starting procedure 1 Press the MODE button to display the AV operation screen. 2 Insert the disc you want to play into disc-loading slot. The source changes and then playback will start. p If the disc is already set, tap [Disc] on the left edge of the screen. Shows the audio track number currently selected.
Chapter Playing a DVD-VR disc 06 Using the touch panel keys Playback screen (page 1) 1 b a 9 8 7 6 5 4 Playback screen (page 2) Playing a DVD-VR disc 2 3 c d e f h p With some discs, the icon 9 may be displayed, meaning that the operation is invalid. 1 c CM Skip/CM Skip d = For details, refer to Using the short-time skip function on page 27. 2 Switches the playback mode = For details, refer to Switching the playback mode on page 27.
Chapter 06 Playing a DVD-VR disc 8 Switches to the next page of touch panel keys 9 Switches the display Touching [Disp] changes the information as follows: Disc information display — Repeat range display and on-off state of the subtitle a Recalls equaliser curves = For detailed operations, refer to the Operation Manual for AVIC-F20BT. b Displays the “Function” menu = For details, refer to Using the “Function” menu on page 28. = For details, refer to Slow motion playback on the next page.
Chapter Playing a DVD-VR disc p Chapter search and time search are not available when disc playback has been stopped. 1 Touch [Search] and then touch [Title] (title), [Chapter] (chapter), [Time] (time). 2 Touch the keys to input the target number or time and then touch [Enter]. 06 Using the short-time skip function This function enables you to skip over your specified interval on the video playback. This is useful to skip commercials on your recorded DVD-VR disc.
Chapter 06 Playing a DVD-VR disc p With some discs, images may be unclear during slow motion playback. p Reversed slow motion playback is not possible. Using the “Function” menu % Touch on the “DVD-VR” screen. The “Function” menu appears. 1 2 3 1 Changes the repeat range Each touch of [Repeat] changes the setting as follows: ! Disc: Plays throughout the current disc. ! Chapter: Repeats just the current chapter. ! Title: Repeats just the current title.
Appendix Troubleshooting Problems in the procedures for updating Cause Action The upgrade process doesn’t start and the navigation system boots up as usual. An incorrect SD memory card has been inserted. Eject the inserted SD memory card and insert the correct upgrade SD memory card. Upgrade has been already done. Check whether the upgrade was done properly. If the upgrade has not been done yet, consult the nearest authorised service station.
Engb
Engb 31
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 Published by Pioneer Corporation. Copyright © 2010 by Pioneer Corporation. All rights reserved.