Owner's Manual

Using the function menu
1 Display the “Function Menu” screen.
= For details of the operation, refer to Display-
ing the “Function Menu” screen on page
81.
2 Turn MULTI-CONTROL to select a func-
tion.
Turning MULTI-CONTROL switches between
the functions in the following order:
Function1 (function 1) — Function2 (function
2) — Function3 (function 3) — Function4
(function 4) — Auto/Manual (auto/man-
ual)
Operate the external unit
by using “Function1”—
“Function4”
The external unit can be operated by transmit-
ting the operating commands set to
“Function1” through “Function4”.
1 Display the “Function Menu” screen.
= For details of the operation, refer to Display-
ing the “Function Menu” screen on page
81.
2 Turn MULTI-CONTROL until the desired
setting appears in the display.
3 Press the center of MULTI-CONTROL to
set.
p The operating commands set to
“Function1” through “Function4” vary de-
pending on the external unit.
p Some functions may not be used until you
touch and hold the key.
Switches between automatic
and manual function
1 Display the “Function Menu” screen.
= For details of the operation, refer to Display-
ing the “Function Menu” screen on page
81.
2 Turn MULTI-CONTROL until “Auto/Man-
ual” appears in the display.
3 Pressing the center of MULTI-CONTROL
switches between “Auto” and “Manual”.
p Operating commands set for “Auto” and
“Manual” operations vary depending on
the external unit connected.
En
113
Chapter
24
Using the external unit (EXT1, EXT2)
Using the external unit (EXT1, EXT2)