Owner's Manual

1 Scroll the map, and place the cursor on
an icon on the map.
2 Touch
.
Detailed information is displayed.
3 Touch
to make a call.
To cancel the call after the system starts dial-
ing, touch
.
4 Touch
to end the call.
Receiving a phone call
You can perform hands-free answering by
using the navigation system.
Answering an incoming call
The system informs you that it is receiving a
call by displaying a message and producing a
ring sound.
If “Auto Answer Preference” is set to “Off”,
answer the call manually. Answering is avail-
able if any screen is displayed, such as the
map screen or the setting screen.
p You can set this navigation system to auto-
matically answer incoming calls.
= For details, refer to Answering a call
automatically on page 70.
1 When a call comes in, the answering
operation menu appears on the screen.
p The registered name appears if the phone
number of the received call is already regis-
tered in “Contacts”.
p Depending on the caller ID service, the
phone number of the received call may not
be displayed. “Unknown” appears instead.
2 To answer an incoming call, touch .
When there is an incoming call, you can reject
it by touching
.
p You can adjust volume when you are talk-
ing. To adjust volume, touch [Vol –] and
[Vol +] displayed on the screen (like below)
when you are talking.
3 Touch to end the call.
The call ends.
p If the voice on the other end of the call is
too quiet to hear, you can adjust the volume
of the received voice.
= For details, refer to Setting the phone vo-
lume on page 69.
p You may hear a noise when you hang up
the phone.
Rejecting an incoming call
You can reject an incoming call.
= For details, refer to Setting the automatic re-
jection function on page 70.
% When a call comes in, touch
.
The call is rejected.
p The rejected call is recorded in the missed
call history list.
= For details, refer to Dialing from the history
on page 65.
En
67
Chapter
12
Using hands-free phoning
Using hands-free phoning