Installation Manual

CP-2000 Rack Mount
ASSEMBLY INSTRUCTIONS
FOR RACKMOUNTING THE DJM-2000
Use the (6) screws and
(12) washers provided.
Remove the 3 screws on the top left, top right and
bottom middle side of the mixer.
Align the rack mount plate to the holes, and screw
the rack mount plate to the mixer (with the provided
screws and washers) in the designated three holes.
Repeat for the other side of the mixer.
Attach top of rack ear to rack mount case using the
screws provided with the rack case.
Use the (6) screws and
1
Remove the 3 screws on the top left, top right and
2
Align the rack mount plate to the holes, and screw
3
Attach top of rack ear to rack mount case using the
4
Questions? Call Pioneer service and support at 1-800-421-1404
www.PioneerDJusa.com
x 6
DJM-2000: Side View