Instruction Manual

Getting started
01
9
En
English
Français
Deutsch
Nederlands
Italiano
Español
Setting the sleep timer
The sleep timer switches off the system after a
specified time so you can fall asleep without
worrying about it.
1
• Press SLEEP repeatedly to select an option
then press
ENTER .
Choose between the following options:
2
• SLP AUTO – Switches off automatically
after the currently playing CD, Video CD or
DivX disc has finished.
•
SLP ON – Switches off after about an hour
•
SLP OFF – Cancels the sleep timer
After selecting
SLP ON , you can press SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
Dimming the display
You can choose to dim the display if you find it
too bright.
1 Press SHIFT+SYSTEM SETUP .
2 Use
/ (cursor left/right) then ENTER
to choose the dimmer setting.
This is shown in the front panel display.
3 Use / (cursor up/down) to select
LIGHT or DARK then press ENTER.
Note
1 The display dims when the sleep timer is set.
2
Sleep Auto will not work with WMA/MP3 discs, Video CD/Super VCDs during PBC playback, or CDs in repeat play.
SLP --- --
XV-DV232.book 9 ページ ２００４年１２月２４日 金曜日 午後１時５９分