English Français DDJ-SR Deutsch DJ Controller Contrôleur pour DJ DJ Controller DJ Controller DJ Controller Italiano The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. The contents of the warranty for the United States and Canada are provided on the last pages of the instructions in English and French. For the latest version of the Serato DJ software, access Serato.
WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En WARNING To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment. This product is for general household purposes.
English For U.S.A. 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
English Before start How to read this manual Thank you for buying this Pioneer product. Be sure to read both this leaflet and the operating instructions! Both documents include important information that you must understand before using this product. After you have finished reading the instructions, put them away in a safe place for future reference. — For instructions on acquiring the operating instructions, see Acquiring the manual (p. 14).
3 Proceed with installation according to the instructions on the screen. Installation begins. If [Windows Security] appears on the screen while the installation is in progress, click [Install this driver software anyway] and continue with the installation. When the installation program is completed, a completion message appears. After installing the driver software, install the Serato DJ software. 4 Select [Download Serato DJ Software] from the CD-ROM’s menu, then click [Start].
This takes you to the Serato DJ download page. Proceed to step 9. 8 Log in. Input the e-mail address and password you have registered to log in to “Serato.com”. 9 Download the Serato DJ software from the download page. Unzip the downloaded file, then double-click the unzipped file to launch the installer. 10 Read the terms of the license agreement carefully, and if you agree, click [Agree]. Operation Be sure the power is off when connecting equipment and changing connections.
2 Connect powered speakers, a power amplifier, components, etc., to the [MASTER OUT1] or [BOOTH OUT/MASTER OUT2] terminals. 5 Switch the [ON/OFF] switch on this unit’s rear panel to the [ON] side to turn this unit’s power on. Powered speaker, etc Turn on the power of this unit. For Windows users The message [Installing device driver software] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer.
English Starting the system 䢢 Launching Serato DJ For Windows From the Windows [Start] menu, click the [Serato DJ] icon under [All Programs] > [Serato] > [Serato DJ]. For Mac OS X In Finder, open the [Applications] folder, then click the [Serato DJ] icon.
䢢 Importing tracks The following describes the typical procedure for importing tracks. There are various ways to import tracks with the Serato DJ software. For details, see the Serato DJ software manual. If you are already using Serato DJ software (Scratch Live, ITCH or Serato DJ Intro) and have already created track libraries, the track libraries you have previously created can be used as such.
4 TRIM control The following describes the procedure for outputting the channel 1 sound as an example. Set the volume of the devices (power amplifier, powered speakers, etc.) connected to the [MASTER OUT1] and [BOOTH OUT/MASTER OUT2] terminals to an appropriate level. Note that loud sound will be output if the volume is set too high.
䢢 Monitoring sound with headphones Set the positions of the controls, etc., as shown below. Names of controls, etc. Position HEADPHONES MIX control Center HEADPHONES LEVEL control Turned fully counterclockwise 1 Press the headphones [CUE/TAP] button for the channel 1. 2 Turn the [HEADPHONES LEVEL] control. Adjust the sound level output from the headphones to an appropriate level. Note This unit and the Serato DJ software include a variety of functions enabling individualistic DJ performances.
Front panel 1 English Mixer section 1 a 2 1 2 b 1 2 3 4 c 3 4 3 4 6 2 3 4 HEADPHONES LEVEL control CROSS FADER REVERSE switch CROSS FADER CURVE control MIC LEVEL control Rear panel 7 5 5 9 1 1 2 3 4 8 1 2 3 4 5 6 7 8 9 a b c TRIM control EQ (HI, MID, LOW) controls FILTER control Headphones CUE/TAP button Channel fader Level indicator switch Level indicator Crossfader CROSS FADER REVERSE indicator MASTER LEVEL control HEADPHONES MIX control SAMPLER VOLUME control This section is used to
Additional information Acquiring the manual The operating instructions may be in a file in PDF format. Adobe® Reader® must be installed to read files in PDF format. If you do not have Adobe Reader, please install it from the download link on the CD-ROM’s menu screen. 5 Click the link to the Serato DJ download page. The Serato DJ download page is displayed. 6 Log in to your “Serato.com” user account. Input the e-mail address and password you have registered to log in to “Serato.com”.
English About trademarks and registered trademarks Pioneer is a registered trademark of PIONEER CORPORATION. The names of companies and products mentioned herein are the trademarks of their respective owners. Cautions on copyrights Recordings you have made are for your personal enjoyment and according to copyright laws may not be used without the consent of the copyright holder. Music recorded from CDs, etc., is protected by the copyright laws of individual countries and by international treaties.
PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN THE U.S.A. AND CANADA WARRANTY Pioneer Electronics (USA) Inc. (PUSA) warrants that products distributed by PUSA in the U.S.A. and Canada that fail to function properly under normal use due to a manufacturing defect when installed and operated according to the owner ’s manual enclosed with the unit will be repaired or replaced with a unit of comparable value, at the option of PUSA, without charge to you for parts or actual repair work.
Pour l’Europe Si vous souhaitez vous débarrasser de cet appareil, ne le mettez pas à la poubelle avec vos ordures ménagères. Il existe un système de collecte séparé pour les appareils électroniques usagés, qui doivent être récupérés, traités et recyclés conformément à la législation.
Pour les États-Unis et le Canada AVERTISSEMENT D3-4-2-1-3_A1_Fr AVERTISSEMENT Pour éviter les risques d’incendie, ne placez aucune flamme nue (telle qu’une bougie allumée) sur l’appareil.
Informations préliminaires Comment lire ce manuel Merci pour l’achat de ce produit Pioneer. Prière de lire cette brochure et le mode d’emploi ! Les deux documents contiennent des informations importantes qui doivent être comprises avant d’utiliser ce produit. Cela fait, conservez le mode d’emploi de façon à pouvoir vous y référer en cas de nécessité. — Pour les instructions sur l’acquisition du mode d’emploi, reportez-vous à Obtention du manuel (p. 13).
3 Procédez à l’installation en suivant les instructions qui apparaissent à l’écran. Si [Sécurité de Windows] apparaît à l’écran au cours de l’installation, cliquez sur [Installer ce pilote quand même] et continuez l’installation. Lorsque le programme d’installation est terminé, le message Installation terminée apparaît. Après avoir installé le pilote, installez le logiciel Serato DJ.
6 Connectez-vous à votre compte utilisateur sur “Serato.com”. Si vous possédez déjà un compte utilisateur sur “Serato.com”, passez au point 8. Si vous ne possédez pas déjà un compte utilisateur, procédez de la façon suivante. — Suivez les instructions à l’écran, saisissez votre adresse de messagerie et le mot de passe souhaité, puis sélectionnez votre région de résidence.
2 Raccordez des enceintes amplifiées, un amplificateur de puissance, des composants, etc. aux prises [MASTER OUT1] ou [BOOTH OUT/MASTER OUT2]. 5 Mettez le commutateur [ON/OFF] sur le panneau arrière en position [ON] pour allumer l’appareil. Français Enceintes alimentées, etc. Allumez cet appareil.
Ouverture du système 䢢 Lancement de Serato DJ Pour Windows Depuis le menu [Démarrer] de Windows, cliquez sur l’icône [Serato DJ] dans [Tous les programmes] > [Serato] > [Serato DJ]. Pour Mac OS X Dans le Finder, ouvrez le dossier [Application], puis cliquez sur l’icône [Serato DJ].
䢢 Importation de morceaux La marche à suivre pour l’importation de morceaux est la suivante. Il existe différentes manières d’importer des morceaux avec le logiciel Serato DJ. Pour le détail, reportez-vous au manuel du logiciel Serato DJ. Si vous utilisez déjà un logiciel Serato DJ (Scratch Live, ITCH ou Serato DJ Intro) et avez déjà créé des bibliothèques de morceaux, ces bibliothèques pourront être utilisées en l’état.
䢢 Lecture de morceaux et restitution du son 4 Commande TRIM La restitution du son du canal 1 par exemple s’effectue de la façon suivante. Réglez le volume des dispositifs (amplificateurs de puissance, enceintes amplifiées, etc.) raccordés aux prises [MASTER OUT1] et [BOOTH OUT/MASTER OUT2] au niveau approprié. Notez que le son sera très fort si le niveau sonore est réglé trop haut.
䢢 Contrôle du son par un casque Réglez les positions des commandes, etc. de la façon suivante. Noms des commandes, etc. Position Commande HEADPHONES MIX Centre Commande HEADPHONES LEVEL Tournée entièrement dans le sens antihoraire 2 Tournez la commande [HEADPHONES LEVEL]. Réglez le niveau du son restitué par le casque d’écoute au niveau approprié. Remarque Cet appareil et le logiciel Serato DJ présentent diverses fonctions facilitant la réalisation de prestations DJ originales.
Section Mixeur Face avant 1 1 a 2 1 2 b 3 4 1 2 3 4 c 3 4 6 2 3 4 Commande HEADPHONES LEVEL Commutateur CROSS FADER REVERSE Commande CROSS FADER CURVE Commande MIC LEVEL Panneau arrière 7 5 5 9 1 1 2 3 4 8 1 2 3 4 5 6 7 8 9 a b c Commande TRIM Commandes EQ (HI, MID, LOW) Commande FILTER Touche CUE/TAP de casque Fader de canal Commutateur d’indicateur de niveau Indicateur de niveau Crossfader Indicateur CROSS FADER REVERSE Commande MASTER LEVEL Commande HEADPHONES MIX Commande SAMPLER V
Informations supplémentaires Obtention du manuel Téléchargement de ce mode d’emploi 1 Insérez le CD-ROM dans le lecteur optique de l’ordinateur. Le menu du CD-ROM apparaît. Si le menu du CD-ROM n’apparaît pas lorsque le CD-ROM est inséré, procédez de la façon suivante. Pour Windows Ouvrez le lecteur optique depuis [Ordinateur (ou Poste de travail)] dans le menu [Démarrer], puis double-cliquez sur l’icône [CD_menu.exe]. Pour Mac OS X Dans le Finder, double-cliquez directement sur l’icône [CD_menu.app].
À propos des marques commerciales et des marques déposées Pioneer est une marque déposée de PIONEER CORPORATION. Les noms de sociétés et de produits mentionnés ici sont des marques commerciales de leurs détenteurs respectifs. Précautions concernant les droits d’auteur Les enregistrements effectués sont destinés à votre usage personnel et, conformément aux lois sur les droits d’auteur, il se peut que leur utilisation soit soumise au consentement du détenteur des droits.
PIONEER ELECTRONICS (USA) INC. GARANTIE LIMITÉE GARANTIE VALABLE UNIQUEMENT AUX ÉTATS-UNIS ET AU CANADA Pioneer Electronics (USA) Inc.
Mischen Sie dieses Produkt, wenn Sie es entsorgen wollen, nicht mit gewöhnlichen Haushaltsabfällen. Es gibt ein getrenntes Sammelsystem für gebrauchte elektronische Produkte, über das die richtige Behandlung, Rückgewinnung und Wiederverwertung gemäß der bestehenden Gesetzgebung gewährleistet wird.
Vor der Inbetriebnahme Zum Lesen dieser Anleitung Über die Serato DJ-Software Serato DJ ist eine DJ-Software-Anwendung von Serato. DJ-Auftritte sind möglich, indem ein Computer an dieses Gerät angeschlossen wird, auf dem diese Software installiert ist. Minimale Betriebsumgebung Unterstützte Betriebssysteme Mac OS X: 10.8, 10.7 und 10.6 Windows: Windows 7 Sonstiges Optisches Laufwerk Optisches Disc-Laufwerk, auf dem die CD-ROM gelesen werden kann USB-Anschluss Ein USB 2.
2 Wenn das CD-ROM-Menü erscheint, wählen Sie [Treiber-Software (Pioneer_DDJ_SR_Driver_x.xxx.exe) installieren ] und klicken dann auf [Start]. Zum Schließen des CD-ROM-Menüs klicken Sie auf [Verlassen]. 12 Lesen Sie die Bedingungen der Lizenzvereinbarung sorgfältig durch, und wenn Sie zustimmen markieren Sie [I agree to the license terms and conditions] und klicken dann auf [Install]. 3 Fahren Sie mit der Installation entsprechend den Anweisungen auf dem Bildschirm fort.
6 Melden Sie sich bei Ihrem „Serato.com“Benutzerkonto an. 7 Klicken Sie auf den Link in der von „Serato.com“ gesendeten E-Mail. Dies bringt Sie zur Serato DJ-Download-Seite. Gehen Sie zu Schritt 9 weiter. Bedienung Stellen Sie sicher, dass das Gerät ausgeschaltet ist, wenn Geräte angeschlossen und Verbindungen hergestellt werden. Verwenden Sie immer das mit diesem Produkt mitgelieferte USB-Kabel. Beachten Sie die Bedienungsanleitung der angeschlossenen Komponente.
2 Schließen Sie die Aktivlautsprecher, einen Endstufenverstärker, Komponenten usw. an die [MASTER OUT1]- oder [BOOTH OUT/MASTER OUT2]Buchsen an. 5 Stellen Sie den [ON/OFF]-Schalter an der Rückseite dieser Einheit zur Seite [ON], um diese Einheit einzuschalten. Aktive Lautsprecher usw. Schalten Sie die Stromversorgung dieses Geräts ein.
Starten des Systems 䢢 Starten von Serato DJ Bei Windows Klicken Sie aus dem Windows [Start]-Menü auf das Icon [Serato DJ] unter [Alle Programme] > [Serato] > [Serato DJ]. Für Mac OS X Im Finder öffnen Sie den Ordner [Anwendung], und klicken Sie dann auf das Icon [Serato DJ].
䢢 Importieren von Tracks Im Folgenden wird das typische Verfahren zum Importieren von Tracks beschrieben. Es gibt verschiedene Möglichkeiten zum Importieren von Tracks mit der Serato DJ-Software. Einzelheiten siehe Anleitung für die Serato DJ-Software. Wenn Sie bereits Serato-DJ-Software (Scratch Live, ITCH oder Serato DJ Intro) verwenden und bereits Track-Bibliotheken angelegt haben können die vorher erstellten Bibliotheken wie vorhanden verwendet werden.
䢢 Abspielen von Tracks und Ausgabe des Sounds 4 TRIM Regler Das folgende Beispiel beschreibt das Verfahren zum Ausgaben des Sounds von Kanal 1 als Beispiel. Stellen Sie die Lautstärke von Geräten (Endstufenverstärker, Aktivlautsprecher usw.), die an die [MASTER OUT1]- und [BOOTH OUT/MASTER OUT2]-Buchsen angeschlossen sind, auf einen geeigneten Pegel ein. Beachten Sie, dass sehr lauter Ton ausgegeben wird, wenn die Lautstärke zu hoch gestellt ist.
䢢 Mithören von Ton mit Kopfhörern Stellen Sie Die Positionen der Regler usw ein, wie unten gezeigt. Bezeichnungen von Reglern usw. Position HEADPHONES MIX Regler Mitte HEADPHONES LEVEL Regler Voll gegen den Uhrzeigersinn gedreht 1 Drücken Sie die [CUE/TAP]-Kopfhörertaste für den Kanal 1. 2 Drehen Sie den Regler [HEADPHONES LEVEL]. Stellen Sie den Soundpegel-Ausgang von den Kopfhörern auf einen geeigneten Pegel ein.
Mixer-Sektion Frontplatte 1 1 a 2 1 2 b 1 2 3 4 c 3 4 6 3 4 HEADPHONES LEVEL Regler CROSS FADER REVERSE Schalter CROSS FADER CURVE-Regler MIC LEVEL Regler Rückseite Deutsch 4 3 2 7 5 5 9 1 1 2 3 4 8 1 2 3 4 5 6 7 8 9 a b c TRIM Regler EQ (HI, MID, LOW)-Regler FILTER Regler CUE/TAP-Kopfhörertaste Kanalfader Pegelanzeige-Schalter Pegelanzeige Crossfader CROSS FADER REVERSE-Anzeige MASTER LEVEL Regler HEADPHONES MIX Regler SAMPLER VOLUME-Regler Dieser Abschnitt dient zur Steuerung der
Zusätzliche Informationen Übernehmen der Anleitung Die Bedienungsanleitung kann in Form einer PDF-Datei vorliegen. Adobe® Reader® muss installiert sein, um Dateien im PDF-Format zu lesen. Wenn Sie Adobe Reader nicht haben, installieren Sie die Software bitte vom Download-Link im Menübildschirm der CD-ROM. 4 Klicken Sie auf [Software Info] unter [DDJ-SR] auf der Pioneer DJ-Support-Website. [Serato DJ Support Information] wird angezeigt. 5 Klicken Sie auf den Link zur Serato DJ-Download-Seite.
Über Markenzeichen und eingetragene Markenzeichen Pioneer ist ein eingetragenes Markenzeichen der PIONEER CORPORATION. Die hier erwähnten Produkt- oder Firmennamen sind Markenzeichen der jeweiligen Eigentümer. Hinweise zum Urheberrechte Deutsch Aufnahmen, die Sie vornehmen, sind für persönlichen Genuss gedacht und dürfen nach dem Urheberrecht nicht ohne Zustimmung des Urheberrechtsinhabers anderweitig verwendet werden. Musik, die von CDs, usw.
Se si vuole eliminare questo prodotto, non gettarlo insieme ai rifiuti domestici. Esiste un sistema di raccolta differenziata in conformità alle leggi che richiedono appositi trattamenti, recupero e riciclo. I privati cittadini dei paesi membri dell’UE, di Svizzera e Norvegia, possono restituire senza alcun costo i loro prodotti elettronici usati ad appositi servizi di raccolta o a un rivenditore (se si desidera acquistarne uno simile).
Prima di cominciare Come leggere questo manuale Il software Serato DJ Serato DJ è un software DJ di Serato. Le prestazioni DJ sono possibili collegando il computer che contiene questo software a questa unità. Ambiente operativo minimo richiesto Sistemi operativi supportati Mac OS X: 10.8, 10.7 e 10.6 Windows: Windows 7 Altri Unità disco ottica Unità disco ottica sulla quale è possibile la lettura del CD-ROM Porta USB Il collegamento del computer a questa unità richiede una porta USB 2.0.
3 Procedere con l’installazione seguendo le istruzioni sullo schermo. L’installazione ha inizio. Se [Protezione di Windows] appare sullo schermo durante l’installazione, far clic su [Installa il software del driver] e continuare l’installazione. Ad installazione completa, appare un messaggio di conferma. Installato il driver, installare anche Serato DJ. 4 Scegliere [Scarica il software Serato DJ.] dal menu del CD-ROM, poi fare clic su [Avvio].
7 Fare clic sul collegamento contenuto nel mail ricevuto da “Serato.com”. Esso vi porterà alla pagina di download di Serato DJ. Procedere con la fase 9. 8 Registrarsi. Digitare l’indirizzo mail ed il password precedentemente registrati per accedere a “Serato.com”. 9 Scaricare Serato DJ dalla pagina di download. Decomprimere il file scaricato e fare doppio clic sul file che ne risulta per iniziare l’installazione.
2 Collegare diffusori autoalimentati, amplificatori di potenza ed altri componenti ai terminali [MASTER OUT1] o [BOOTH OUT/MASTER OUT2]. 5 Per accendere questa unità, portare l’interruttore [ON/OFF] del pannello posteriore di questa sul lato [ON]. Diffusori autoalimentati, ecc. Accendere questa unità.
Avvio del sistema 䢢 Avvio di Serato DJ In Windows Dal menu [Start] di Windows, fare clic sull’icona [Serato DJ] in [Tutti i programmi] > [Serato] > [Serato DJ]. In Mac OS X Nel Finder, aprire la cartella [Applicativo], poi fare clic sull’icona [Serato DJ]. Schermata del computer subito dopo il lancio di Serato DJ A C 1 1 L’icona [ACTIVATE/BUY] può apparire sulla destra della schermata che appare al primo lancio di Serato DJ, ma chi usa DDJ-SR non ha bisogno di attivare o acquistare licenze.
䢢 Importazione dei brani La seguente è la procedura normale di importazione di brani. Serato DJ consente di importare brani in vari modi. Per dettagli, vedere le istruzioni per l’uso di Serato DJ. Se si sta già usando il software per DJ Serato (Scratch Live, ITCH o Serato DJ Intro) e si sono già create library di brani, esse possono venire usate come sono. Se si fa uso di Serato DJ Intro e si sono già create librerie di brani, questi potrebbero dovere venire reinizializzati.
䢢 RIproduzione di brani e del relativo audio 4 Controllo TRIM Di seguito viene descritta come esempio la procedura di riproduzione del canale 1. Impostare il volume dei dispositivi (amplificatori di potenza, diffusori autoalimentati, ecc.) collegati ai terminali [MASTER OUT1] e [BOOTH OUT/MASTER OUT2] su di un livello appropriato. Tenere presente che, se il volume è eccessivo, vengono prodotti suoni molto potenti.
䢢 Monitoraggio audio in cuffia Impostare i comandi, ecc. nel modo seguente. Nome dei comandi, ecc. Posizione Controllo HEADPHONES MIX Centrale Controllo HEADPHONES LEVEL Girata del tutto in senso antiorario Sezione browser 1 2 3 1 Premere il pulsante [CUE/TAP] delle cuffie per il canale 1. 2 Girare il controllo [HEADPHONES LEVEL]. Regolare il livello di ingresso audio in cuffia su un valore corretto.
Sezione mixer Pannello anteriore 1 1 a 2 1 2 b 1 2 3 4 c 3 4 3 4 6 2 3 4 Controllo HEADPHONES LEVEL Interruttore CROSS FADER REVERSE Controllo CROSS FADER CURVE Controllo MIC LEVEL Pannello posteriore 7 5 5 1 1 2 3 4 8 1 2 3 4 5 6 7 8 9 a b c Controllo TRIM Controlli EQ (HI, MID, LOW) Controllo FILTER Pulsante della cuffia CUE/TAP Fader canali Interruttore dell’indicatore del livello Indicatore del livello Crossfader Indicatore CROSS FADER REVERSE Controllo MASTER LEVEL Controllo HEADPHO
Informazioni aggiuntive Acquisizione del manuale Le Istruzioni per l’uso possono assumere la forma di file PDF. La lettura di file PDF richiedere l’installazione di Adobe® Reader®. Se non si possiede Adobe Reader, scaricarlo dal collegamento della schermata del menu del CD-ROM ed installarlo. 5 Fare clic sul link della pagina di download di Serato DJ. Viene visualizzata la pagina di download di Serato DJ. 6 Accedere al proprio account utente di “Serato.com”.
A proposito del marchi di fabbrica o marchi di fabbrica depositati Pioneer è un marchio di fabbrica depositato della PIONEER CORPORATION. I nomi delle aziende e dei prodotti menzionati sono marchi di fabbrica dei rispettivi proprietari. Precauzioni sui copyright Le registrazioni eseguite sono per il godimento personale e secondo le leggi sul copyright non possono essere utilizzate senza il consenso di chi detiene il copyright. La musica registrata da CD, ecc.
Deponeer dit product niet bij het gewone huishoudelijk afval wanneer u het wilt verwijderen. Er bestaat een speciaal wettelijk voorgeschreven verzamelsysteem voor de juiste behandeling, het opnieuw bruikbaar maken en de recycling van gebruikte elektronische producten.
Alvorens te beginnen Opmerkingen over deze handleiding Hartelijk dank voor uw aankoop van dit Pioneer product. U moet zowel dit document als de handleiding lezen! Beide documenten bevatten belangrijke informatie die u moet begrijpen voor u dit product gaat gebruiken. Na het doorlezen van de gebruiksaanwijzing dient u deze te bewaren op een veilige plaats, voor latere naslag. — Zie Verkrijgen van de handleiding (blz. 12) voor instructies over hoe u de handleiding kunt verkrijgen.
3 Volg voor de installatieprocedure de aanwijzingen die op uw scherm verschijnen. Als er [Windows-beveiliging] op het scherm verschijnt tijdens het installationproces, klikt u op [Dit stuurprogramma toch installeren] om door te gaan met installeren. Wanneer het installatieproces voltooid is, verschijnt er een mededeling ter afsluiting. Nadat u de stuurprogrammatuur (driver) hebt geïnstalleerd, moet u de Serato DJ-software installeren.
6 Meld uzelf aan op uw gebruikersaccount voor “Serato.com”. Als u al een geregistreerde gebruikersaccount hebt op “Serato. com”, kunt u doorgaan naar stap 8. Als u de registratie van uw gebruikersaccount niet voltooid hebt, moet u dat alsnog doen via de procedure hieronder. — Volg de instructies op uw scherm, voer uw e-mailadres in en het wachtwoord dat u wilt gebruiken en selecteer vervolgens de regio waar u woont.
2 Sluit luidsprekers met eigen stroomvoorziening, een eindversterker, componenten enz. aan op de [MASTER OUT1] of [BOOTH OUT/MASTER OUT2]-aansluitingen. 5 Zet de [ON/OFF]-schakelaar op het achterpaneel van dit toestel op [ON] om het toestel in te schakelen. Luidsprekers met eigen stroomvoorziening enz. Schakel dit apparaat in.
Opstarten van het systeem 䢢 Starten van de Serato DJ Voor Windows Klik op het Windows [Starten]-menu op het [Serato DJ]-pictogram onder [Alle programma's] > [Serato] > [Serato DJ]. Voor Mac OS X Ga naar het bestandsbeheer, open eerst the [Applicatie] map en klik dan op [Serato DJ].
䢢 Muziekstukken importeren Hier volgt een beschrijving van de typische procedure voor het importeren van muziekstukken. Er zijn verschillende manieren om muziekstukken te importeren met de Serato DJ-software. Zie de software handleiding van Serato DJ voor verdere informatie. Als u reeds DJ-software van Serato (Scratch Live, ITCH of Serato DJ Intro) gebruikt en al bibliotheken met muziekstukken heeft gecreëerd, kunnen deze als zodanig worden gebruikt.
䢢 Afspelen van muziekstukken en produceren van het geluid Hieronder volgt een beschrijving van de procedure voor het produceren van het geluid via kanaal 1 als voorbeeld. Stel het volume van de apparatuur (eindversterker, luidsprekers met eigen stroomvoorziening enz.) aangesloten op de [MASTER OUT1] en [BOOTH OUT/MASTER OUT2]-aansluitingen in op een geschikt niveau. Als u het volume te hoog instelt, zullen er erg harde geluiden klinken.
䢢 Meeluisteren via een hoofdtelefoon Stel de instellingen enz. in zoals u hieronder kunt zien. Namen van instellingen enz. Stand HEADPHONES MIX instelling Midden HEADPHONES LEVEL instelling Helemaal tegen de klok in gedraaid 1 Druk op de hoofdtelefoon [CUE/TAP]-toets voor kanaal 1. 2 Draai aan de [HEADPHONES LEVEL] instelling. Stel het geluidsniveau dat geproduceerd wordt via de hoofdtelefoon in op een geschikt niveau.
Mengpaneel-gedeelte Voorpaneel 1 1 a 2 1 2 b 1 2 3 4 c 3 4 3 4 6 2 3 4 HEADPHONES LEVEL instelling CROSS FADER REVERSE-schakelaar CROSS FADER CURVE-instelling MIC LEVEL-instelling Achterpaneel 7 5 5 9 1 1 2 3 4 8 TRIM instelling EQ (HI, MID, LOW) instellingen FILTER-instelling Hoofdtelefoon CUE/TAP-toets Kanaal-fader Niveau-indicatorschakelaar Niveau-indicator Crossfader-regelaar CROSS FADER REVERSE-indicator MASTER LEVEL instelling HEADPHONES MIX instelling SAMPLER VOLUME-instelling D
Aanvullende informatie Verkrijgen van de handleiding De handleiding kan in een bestand in PDF-formaat geleverd worden. Adobe® Reader® moet zijn geïnstalleerd om bestanden in PDF-formaat te kunnen lezen. Als u Adobe Reader niet heeft, moet u dit installeren via de downloadkoppeling op het menuscherm van de CD-ROM. De handleiding van dit toestel downloaden 1 Plaats de CD-ROM in het optische schijfstation van de computer. Dan verschijnt het menu van de CD-ROM.
Over handelsmerken en gedeponeerde handelsmerken Pioneer is een gedeponeerd handelsmerk van PIONEER CORPORATION. De hierin vermelde namen van bedrijven en hun producten zijn de handelsmerken van hun respectieve eigenaars. Waarschuwingen betreffende auteursrechten Opnemen die u hebt gemaakt kunnen slechts dienen voor uw eigen luisterplezier en kunnen onder de auteursrechtwetten niet voor andere doeleinden worden gebruikt zonder toestemming van de auteursrechthouder.
To register your product, find the nearest authorized service location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs : Pour enregistrer votre produit, trouver le service après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes d’emploi ou des accessoires, reportez-vous aux URL suivantes : In the USA & Canada/Aux Etats-Unis & Canada http://www.pioneerelectronics.com S018_B1_EnFr_PSV © 2013 PIONEER CORPORATION.