DJ Equipment User Manual

Firmware Update Guide

PAGE 1
Firmware Update Guide
PAGE 2
3) When the update file for DDJ-WeGO (DDJ-WeGO_Vxxx.jar) is activated, the following dialogue is displayed. Click the [Start] button. 1. Read Before Use (Important) Cautions ・・・ Be sure to follow the procedure in this guide to update the firmware. DO NOT turn off the power or disconnect the USB cable unit updating is completed. If you should have any questions, please contact the Pioneer Customer Support Center.
PAGE 3
[For Mac] 3. How to check the firmware version Open the Apple menu while pressing the option key, then select “System Profiler.” [For Windows] ASIO driver exclusively for DDJ-WeGO is required to be installed. From the [Start menu], Run [All the programs] → [Pioneer] → [DDJ-WeGO] → [DDJ_WeGO Version Display Utility] Select the [USB] from the [Hardware] to display the name of the controller. Select the controller to display the firmware version.