CD RDS RECEIVER DEH-X5700BT DEH-4700BT Operation Manual English
Table of Contents Before You Start....................................................................................... 3 Getting Started........................................................................................ 4 Radio.......................................................................................................... 6 CD/USB/iPod/AUX................................................................................... 7 Bluetooth..........................................................
Before You Start If you experience problems Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service Station. Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.
Frequently used operations Getting Started The available buttons vary depending on the unit. Basic operation Purpose Operation Turn on the power* Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. DEH-X5700BT M.C. (multi-control) dial SRC (source)/OFF Display window Adjust the volume Turn the M.C. dial. Select a source Press SRC/OFF repeatedly. Change the display information Press DISP repeatedly. Return to the previous display/list Press /DIMMER.
3 Detaching the front panel Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it. Detach Attach 4 [QUIT :YES] appears when all the settings have been made. To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm. Press the M.C. dial to confirm the settings. NOTES • You can cancel the menu setting by pressing SRC/OFF.
Menu Item Description [REAR/REAR] Select when there are full-range speakers connected to the rear speaker output leads and RCA output. If there is a full-range speaker connected to the rear speaker output leads, and the RCA output is not used, you may select either [REAR/SUB.W] or [REAR/REAR]. To seek a station manually 1 After selecting the band, press / to select a station. Press and hold / then release to seek an available station. Scanning stops when the unit receives a station.
AUX 1 Insert the stereo mini plug into the AUX input jack. 2 Press SRC/OFF to select [AUX] as the source. CD/USB/iPod/AUX Playing back NOTE Disconnect headphones from the device before connecting it to the unit. (eject) Disc loading slot USB port If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 13). Operations You can make various adjustments in the FUNCTION settings (page 12). Note that the following operations do not work for an AUX device.
Purpose NOTES Operation Pause/resume playback Press 4/PAUSE. Sound retriever*2*3 Press 3/S.Rtrv. [1]: Effective for low compression rates [2]: Effective for high compression rates Return to root folder (USB only)*1 Press and hold BAND/ Switch between compressed audio and CD- Press BAND/ DA (CD only) . Change drives in USB device Press BAND/ (Devices that support the USB mass storage device class protocol only) . • Switching the control mode to [CONTROL iPod/CTRL iPod] pauses song playback.
5 6 Select [Pioneer BT Unit] shown in the device display. Menu Item Description Make sure the same 6-digit number appears on this unit and the device, then select “Yes” on the device. A.PAIRING Select [ON] to pair the unit and iPhone automatically when an iPhone is connected to the unit via USB. (This function may not be available depending on the version of iOS you are using.) [ON], [OFF] NOTES • [DEVICE FULL] appears if the unit has already been paired with three other devices.
Purpose Operation Cancel a caller on hold Press and hold Adjust the volume of the caller’s voice (When private mode is on, this function is not available.) Turn the M.C. dial during the call. Turn the privacy mode on or off Press BAND/ . Menu Item Description PRESET 1-6 Recall the preset phone numbers. You can also recall the preset phone numbers by pressing one of the number buttons (1/ to 6/ ). PHONE FUNC Select [ON] to answer an incoming call automatically. during the call. A.
Purpose Operation Random play* Press 5/ Pause/resume playback Press 4/PAUSE. Search for a file from a list 1 Press to display a list. 2 Turn the M.C. dial to select the desired folder name, then press to confirm. 3 Turn the M.C. dial to select the desired file, then press to confirm. Playback starts. Playback of an application via the unit . * Depending on the connected device, these operations may not be available.
Menu Item FUNCTION settings The menu items vary according to the source. Menu Item Description FM SETTING [TALK], [STANDARD], [MUSIC] Match the sound quality level with the broadcast signal conditions of the FM band signal. (Available only when FM band is selected.) S.RTRV Description USB [1] (effective for low compression Enhance compressed audio and restore rich rates), sound. (Not available when USB is selected as a [2] (effective for high source and the MIXTRAX function is set to on.
Menu Item Description LOUDNESS [OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume. You can also access to these menus when the unit is turned off. Menu Item SUB.W*2 [NOR], [REV], [OFF] SYSTEM settings Select the subwoofer phase. [ENG](English), [РУС](Russian), [TUR](Turkish) SUB.
Menu Item Description APP CONN. SET*2 [WIRED], [BLUETOOTH] Menu Item Select the appropriate connection method according to your device. *1 [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may continue to draw power from the battery if your vehicle’s ignition does not have an ACC (accessory) position. *2 Not available when [APP] is selected as the source.
Menu Item [RANDOM3] Description The flash pattern changes randomly according to the low pass mode. DISPLAY FX [ON], [OFF] Set the MIXTRAX special effects on/off. CUT IN FX [ON], [OFF] Turn the MIXTRAX sound effects on/off while manually changing the tracks.
Additional Information Troubleshooting The display automatically returns to the normal display. → No operations have been made for about 30 seconds. – Perform an operation. The repeat play range changes unexpectedly. → Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. – Select the repeat play range again. A subfolder is not played back. → Subfolders cannot be played when [FLD] (folder repeat) is selected.
ERROR-23 → USB device was not formatted properly. – Format the USB device with FAT12, FAT16 or FAT32. ERROR-16 → The iPod firmware version is old. – Update the iPod version. → iPod failure. – Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it. STOP → There are no songs in the current list. – Select a list that contains songs. NOT FOUND → No related songs. – Transfer songs to the iPod.
WMA files File extension Bit rate Sampling frequency Windows Media™ Audio Professional, Lossless, Voice/DRM Stream/Stream with video .wma 48 kbps to 320 kbps (CBR), 48 kbps to 384 kbps (VBR) 32 kHz, 44.1 kHz, 48 kHz Not compatible Sampling frequency Compatible ID3 tag version M3u playlist MP3i (MP3 interactive), mp3 PRO .mp3 8 kbps to 320 kbps (CBR), VBR 8 kHz to 48 kHz (32 kHz, 44.1 kHz, 48 kHz for emphasis) 1.0, 1.1, 2.2, 2.3, 2.4 (ID3 tag Version 2.x is given priority over Version 1.x.
Copyright and trademark Specifications Bluetooth General The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. Power source: 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system: Negative type Maximum current consumption: 10.
© 2014 PIONEER CORPORATION. All rights reserved.
