Operation Manual CD RDS RECEIVER DEH-7300BT English
Section 01 Before You Start Thank you for purchasing this PIONEER product. To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. If you want to dispose this product, do not mix it with general household waste.
Section Before You Start 01 Before You Start Demo mode Important ! Failure to connect the red lead (ACC) of this unit to a terminal coupled with ignition switch on/off operations may lead to battery drain. ! Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power. The demo automatically starts when the ignition switch is set to ACC or ON while the unit is turned off. Turning off the unit does not cancel demo mode.
Section 02 Operating this unit Head unit Operation is the same as when using the buttons on the head unit. 12 3 4 78 9 a 5 6 b c Part 8 (phone/on hook) 2 h (eject) 9 (Back/display/ scroll) a a/b/c/d (list) i 1 j Part Operation f VOLUME Press to increase or decrease volume. g MUTE Press to mute. Press again to unmute. 4 MULTI-CONTROL (M.C.) b TA/NEWS 5 Disc loading slot c 1 to 6 6 USB port d AUX input jack (3.
Section Operating this unit 02 Display indication 2 3 6 8 9 ab d f 45 7 c e Indicator 2 3 Main display section ! Tuner: band and frequency RDS: program service name, PTY information and other literal information Built-in CD, USB storage device and iPod: elapsed playback time and text information c An upper tier of the folder or menu exists. d A lower tier of the folder or menu exists. This flashes when a song/album related to the song currently playing is selected from the iPod.
Section 02 Operating this unit Removing the front panel to protect your unit from theft 1 Press the detach button to release the front panel. 2 Push the front panel upward and pull it toward you. Note When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.
Section Operating this unit Rejecting an incoming call 1 When a call is received, press 02 Tuner . Basic Operations Switching between callers on hold 1 Press M.C. Selecting a band 1 Press B (BAND/ESC) until the desired band (F1, F2, F3 for FM or MW/LW) is displayed. Canceling call waiting 1 Press . Manual tuning (step by step) 1 Press c or d. Adjusting the other party’s listening volume 1 Press a or b while talking on the phone. Seeking 1 Press and hold c or d, and then release.
Section 02 Operating this unit PTY list NEWS/INFO NEWS (News), AFFAIRS (Current affairs), INFO (Information), SPORT (Sports), WEATHER (Weather), FINANCE (Finance) POPULAR POP MUS (Popular music), ROCK MUS (Rock music), EASY MUS (Easy listening), OTH MUS (Other music), JAZZ (Jazz), COUNTRY (Country music), NAT MUS (National music), OLDIES (Oldies music), FOLK MUS (Folk music) CLASSICS L.
Section Operating this unit CD/CD-R/CD-RW and USB storage devices Basic Operations LOCAL (local seek tuning) Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting.
Section Operating this unit 02 Selecting and playing files/ tracks from the name list 2 Turn M.C. to change the menu option and press to select FUNCTION. 1 Press to switch to the file/track name list mode. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. 2 Use M.C. to select the desired file name (or folder name). Changing the file or folder name 1 Turn M.C. Playing 1 When a file or track is selected, press M.C.
Section Operating this unit iPod Playing songs on an iPod 1 Open the USB connector cover. 2 Connect an iPod to the USB cable using an iPod Dock Connector. Selecting a track (chapter) 1 Press c or d. Fast forwarding or reversing 1 Press and hold c or d. Playing a song in the selected category 1 When a category is selected, press and hold M.C. Searching the list by alphabet 1 When a list for the selected category is displayed, press to switch to alphabet search mode. 2 Turn M.C. to select a letter.
Section Operating this unit 02 Operating this unit’s iPod function from your iPod You can listen to the sound from your iPod applications using your car's speakers, when CTRL APP is selected. This function is not compatible with the following iPod models. ! iPod nano 1st generation ! iPod 5th generation APP mode is compatible with the following iPod models. ! iPhone 3GS (software version 4.0 or later) ! iPhone 3G (software version 4.0 or later) ! iPhone (software version 3.
Section Operating this unit Bluetooth Telephone Connection menu operation Important Be sure to park your vehicle in a safe place and apply the parking brake when performing this operation. 1 Press and hold nection menu. to display the con- # You cannot operate this step during a call. 2 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. DEVICELIST (connecting or disconnecting a cellular phone from the device list) 1 Press M.C.
Section Operating this unit 02 A. CONN (connecting to a Bluetooth device automatically) 1 Press M.C. to turn automatic connection on or off. VISIBLE (setting the visibility of this unit) To check the availability of this unit from other devices, Bluetooth visibility of this unit can be turned on. 1 Press M.C. to turn the visibility of this unit on or off. ! While setting SPCL. DEV., Bluetooth visibility of this unit is turned on temporarily.
Section Operating this unit Function and operation 2 Press M.C. to display the function menu. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. A. ANSR (automatic answering) 1 Press M.C. to turn automatic answering on or off. R.TONE (ring tone select) 1 Press M.C. to turn the ring tone on or off. Audio Adjustments 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select AUDIO. 3 Turn M.C.
Section 02 Operating this unit SLA (source level adjustment) AUTO-PI (auto PI seek) SLA (Source Level Adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM volume level, which remains unchanged. ! The MW/LW volume level can also be adjusted with this function. ! When selecting FM as the source, you cannot switch to SLA. 1 Press M.C. to display the setting mode. 2 Turn M.C.
Section Operating this unit S/W UPDATE (updating the software) This function is used to update this unit with the latest software. For information on the software and updating, refer to our website. ! Never turn the unit off while the software is being updated. 1 Press M.C. to display the data transfer mode. Follow the on-screen instructions to finish updating the software. PW SAVE (power saving) Switching this function on enables you to reduce the consumption of battery power.
Appendix Additional Information Troubleshooting Built-in CD Player Message Symptom Cause Action The display automatically returns to the ordinary display. You did not per- Perform operation form any opera- again. tion within about 30 seconds. Select the repeat The repeat play Depending on play range again. range changes the repeat play unexpectedly. range, the selected range may change when another folder or track is being selected or during fast forwarding/ reversing.
Appendix Additional Information Cause Action Message Cause Action There are no songs. Transfer the audio files to the USB storage device and connect. CHECK USB The USB connector or USB cable has shortcircuited. The connected USB storage device has security enabled Follow the USB storage device instructions to disable the security. Check that the USB connector or USB cable is not caught in something or damaged.
Appendix Additional Information Message Cause Action ERROR-23 USB storage device was not formatted with FAT12, FAT16 or FAT32 USB storage device should be formatted with FAT12, FAT16 or FAT32. The iPod firmware version is old Update the iPod version. iPod failure Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. ERROR-16 STOP Select a list that There are no songs in the cur- contains songs. rent list.
Appendix Additional Information USB storage device Connections via USB hub are not supported. Do not connect anything other than a USB storage device. Depending on the USB storage device, the following problems may occur. ! Operations may vary. ! The storage device may not be recognized. ! Files may not be played back properly. ! The device may generate noise in the radio. iPod Compressed audio compatibility (disc, USB) WMA File extension: .wma Do not leave the iPod in places with high temperatures.
Appendix Additional Information Supplemental information CAUTION Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. Do not leave discs or a USB storage device in any place that is subject to high temperatures.
Appendix Additional Information Example of a hierarchy 01 02 D: C D: C D: C D: C :Х :Ц :Ч : Ш, Щ :Ъ :Ы :Ь :Э :Ю :Я 05 Level 1 Level 2 Level 3 Level 4 : Folder : Compressed audio file 01 to 05: Folder number 1 to 6: Playback sequence Disc Folder selection sequence or other operation may differ depending on the encoding or writing software. USB storage device Playback sequence is the same as recorded sequence in the USB storage device.
Appendix Additional Information MP3 Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegenerating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/ or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications.
Appendix Additional Information WAV signal format .................. Linear PCM & MS ADPCM (Non-compressed) USB Additional Information USB standard specification ..................................................... USB 2.0 full speed Maximum current supply .... 500 mA USB Class ................................... MSC (Mass Storage Class) File system .................................. FAT12, FAT16, FAT32 WMA decoding format ......... Ver. 7, 7.
En
En 27
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
