Owner's Manual
Table Of Contents
- Owners Manual
- Clock Set (Menu Item)
- Table of Contents
- Removing / Attaching Faceplate
- Demo Mode
- Parts & Controls
- Operation
- Audio Adjustments
- Initial Settings
- Using the AUX Sources
- Clock Display On / Off
- Switching the Display Indication and Button Illumination
- Using Different Entertainment Displays
- iPod Playback
- Bluetooth Audio
- Bluetooth Telephone
- Optional Equipment
- Error Messages
- Specs
- Installation Manual
- Warranty
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
! Shows the function status.
1 Press SRC and hold until the unit turns
off.
2 Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)—
Calendar (calendar)—Clock (clock)—
Warning tone (warning tone)—AUX1 (auxili-
ary input 1)—AUX2 (auxiliary input 2)—
Dimmer (dimmer)—Brightness (brightness)
—S/W control (rear output and subwoofer
controller)—Mute (sound muting/attenua-
tion)—Demonstration (feature demo)—
Reverse mode (reverse mode)—Ever-scroll
(ever scroll)—BT AUDIO (Bluetooth audio)—
Pin code input (pin code input)—
BT Version info. (Bluetooth version informa-
tion)
Use the following instructions to operate each
particular setting.
# BT AUDIO, Pin code input and
BT Version info. can be selected only when Blue-
tooth adapter (e.g., CD-BTB200) is connected to
this unit.
# To cancel initial settings, press BAND/ESC.
Selecting the display language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1 Use MULTI-CONTROL to select
Language select in the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Press MULTI-CONTROL to select the lan-
guage.
Each press of MULTI-CONTROL selects lan-
guages in the following order:
English—Français—Español
Setting the date
The calendar display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Use MULTI-CONTROL to select Calendar
in the initial setting menu.
Refer to Adjusting initial settings on this page.
Calendar appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
3 Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
Initial Settings
En
28
Section
04