Owner's Manual

Connecting the unit English
Connecting the unit English
When not connecting a rear speaker lead to a subwoofer
This product
Front output
Antenna jack
Subwoofer output
Fuse (10 A)
Rear output
IP-BUS input (Blue)
IP-BUS cable
Multi-CD player
(sold separately)
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
20 cm
(7-7/8 in.)
Pioneer CD-U150E USB cable
(sold separately)
USB port 2
Use a USB cable to connect the USB storage
device to the USB port 2.
Pioneer CD-U150E USB cable is also available.
For details, consult your dealer.




Yellow/black
If you use an equipment with Mute function,
wire this lead to the Audio Mute lead on that
equipment. If not, keep the Audio Mute lead
free of any connections.








Power amp
(sold separately)
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Connect with RCA cables
(sold separately)
Perform these connections
when using the optional
amplifier.
Black (chassis ground)
Connect to a clean, paint-free metal location.
System remote control
Left Right
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Front speaker Front speaker
Rear speaker Rear speaker
White Gray
Gray/blackWhite/black
Green Violet
Green/black Violet/black
Power amp
(sold separately)


Front speaker


Power amp
(sold separately)
To subwoofer
output
To front output
To rear output
Front speaker
Rear speaker
Rear speaker
Subwoofer
Subwoofer