Owner's Manual

19En
English
You can enjoy various entertainment displays while listening to each sound source.
Select a display type from [Simple display], [spectrum analyzer], [level indicator] or
[calendar].
NOTE
When SiriusXM, HD Radio, Radio, or AUX is selected as a source, the simple display will appear even if
spectrum analyzer or level indicator is set.
You can also access these menus when the unit is turned off.
* Not available when [Pandora] or [App] is selected as the source.
Subwoofer1
[Normal], [Reverse], [OFF] Select the subwoofer phase.
Subwoofer2
Cut-off frequency: [50Hz],
[63Hz], [80Hz], [100Hz], [125Hz]
Output level: [–24] to [+6]
Only frequencies lower than those in the
selected range are output from the subwoofer.
Bass Booster
[0] to [+6] Select the bass boost level.
HPF
Cut-off frequency: [OFF], [50Hz],
[63Hz], [80Hz], [100Hz], [125Hz]
Only frequencies higher than the high-pass filter
(HPF) cutoff are output from the speakers.
SLA
[+4] to [–4] Adjust the volume level for each source except
FM.
Each of the below combinations are set to the
same setting automatically.
• USB, iPod, Pandora (iPhone), and App (iPhone)
• BT Audio, Pandora (Android), and App
(Android)
ENTERTAINMENT settings
SYSTEM settings
Menu Item Description
Language select
[English], [Français], [Español] Select the language to display the text
information from a compressed audio file.
Menu Item Description
Calendar
Set the date.
Clock Setting
Set the clock and select the time notation
(page 6).
EngineTime alert
[OFF], [15Minutes], [30Minutes] Display how much time has elapsed since the
vehicle was turned on.
Clock
[ON], [Elapsed time], [OFF] Set the clock or the elapsed time to display even
if the unit is turned off.
Warning tone
[ON], [OFF] A beep can be heard when the front panel is not
detached from the head unit within four seconds
of turning off the ignition. Select [OFF] to disable
this function.
AUX
[ON], [OFF] Set to [ON] when using an auxiliary device
connected to the unit.
BT AUDIO
[ON], [OFF] Set the Bluetooth signal on/off.
Clear memory
[Clear memory YES], [Cancel] Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[Cleared] appears when data is successfully
deleted.
BT Version Info.
Displays the system version of the unit and the
Bluetooth module.
APP CONNECT MODE*
[Wired], [Bluetooth] Select the appropriate connection method
according to your device.
Menu Item Description