Operation Manual

15En
You can enjoy various entertainment displays while listening to each sound source.
Select a display type from [Simple display], [spectrum analyzer], [level indicator] or
[calendar].
NOTE
When Radio or AUX is selected as a source, the simple display will appear even if spectrum analyzer or
level indicator is set.
You can also access these menus when the unit is turned off.
AUDIO settings
Menu Item Description
Fader/Balance
Adjust the front/rear or left/right speaker
balance.
Preset EQ
[SuperBass], [Powerful], [Natural],
[Vocal], [Custom1], [Custom2],
[Flat]
Select the preset equalizer curve.
G. EQ
Select an equalizer band and
level for further customizing.
Equalizer band: [100Hz], [315Hz]
, [1.25kHz], [3.15kHz], [8kHz]
Equalizer level: [+6] to [–6]
Customize the equalizer curve.
[Custom1] can be set separately for each source.
However, each of the below combinations are set
to the same setting automatically.
• USB, iPod, and App (iPhone)
• BT Audio, and App (Android)
[Custom2] is a shared setting used for all sources.
Loudness
[OFF], [Low], [Mid], [High] Compensate for clear sound at low volume.
Subwoofer1
[Normal], [Reverse], [OFF] Select the subwoofer phase.
Subwoofer2
Cut-off frequency: [50Hz],
[63Hz], [80Hz], [100Hz], [125Hz]
Output level: [–24] to [+6]
Only frequencies lower than those in the
selected range are output from the subwoofer.
Bass Booster
[0] to [+6] Select the bass boost level.
HPF
Cut-off frequency: [OFF], [50Hz],
[63Hz], [80Hz], [100Hz], [125Hz]
Only frequencies higher than the high-pass filter
(HPF) cutoff are output from the speakers.
SLA
[+4] to [–4] Adjust the volume level for each source except
FM.
Each of the below combinations are set to the
same setting automatically.
• USB, iPod, and App (iPhone)
• BT Audio, and App (Android)
ENTERTAINMENT settings
SYSTEM settings
Menu Item Description
Language select
[English], [Français], [Italiano],
[Español], [Deutsch],
[Nederlands], [РУССКИЙ]
Select the language to display the text
information from a compressed audio file.
Calendar
Set the date.
Clock Setting
Set the clock and select the time notation
(page 5).
EngineTime alert
[OFF], [15Minutes], [30Minutes] Display how much time has elapsed since the
vehicle was turned on.
Clock
[ON], [Elapsed time], [OFF] Set the clock or the elapsed time to display even
if the unit is turned off.
Auto PI
[ON], [OFF] Search for a different station with the same
programming, even if using a preset station.
Warning tone
[ON], [OFF] A beep can be heard when the front panel is not
detached from the head unit within four seconds
of turning off the ignition. Select [OFF] to disable
this function.