Operation Manual

16En
* Not available when [App] is selected as the source.
AUX
[ON], [OFF] Set to [ON] when using an auxiliary device
connected to the unit.
BT AUDIO
[ON], [OFF] Set the Bluetooth signal on/off.
Clear memory
[Clear memory YES], [Cancel] Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[Cleared] appears when data is successfully
deleted.
BT Version Info.
Displays the system version of the unit and the
Bluetooth module.
APP CONNECT MODE*
[Wired], [Bluetooth] Select the appropriate connection method
according to your device.
Menu Item Description
ILLUMINATION settings
Menu Item Description
Colour Setting
[Key Side], [Display Side], [Key &
Display]
Select color for the keys/display of the unit from
12 preset colors, [Scan] or [Custom]*.
• [Scan]: Cycle through a variety of colors
automatically.
• [Custom]*:
1 Press and hold the M.C. dial until the color
setting display appears.
2 Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 20 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The Custom setting is only available for [Key Side]
and [Display Side].
Dimmer Setting
[Sync Vehicle Illumi], [Sync Clock],
[ON], [OFF]
Change the display brightness.
Brightness
[1] to [10] Change the display brightness.
The available setting ranges differ depending on
[Dimmer Setting].
Phone Colour
[Flashing] Select the key color when a call is received.
Applies the color set by [Key Side].
[Flash FX 1] to [Flash FX 6] Cycle through a variety of colors automatically.
[OFF] No change in key color made.
Illumi Effect
[ON], [OFF] The illumination effect can be seen when;
– there is an incoming call
– you are on the phone
– a CD is inserted/ejected