User guide

Audio Adjustment <Network>

Inputting the Distance to be Corrected (Delay Time)

Scope of adjustment: 0 — 340.0 cm (1.7 cm/1 step)

Note:

• The correct distance can not be input unless these operations are conducted.

S.W. (ultrabass-range) Ô LOW (low-range) Ô MID (mid-range) Ô HIGH (high-

range)

5. Press FUNCTION buttons 1 or 2

and select the band to input.

Each press of the FUNCTION buttons

1 or 2 select the desired band in the

following order:

4. Press FUNCTION buttons 3 or 4

and select the speaker channel to

input.

Press the buttons to switch between left

(LEFT) and right (RIGHT).

Press the FUNCTION button 5

and select the driver’s seat (posi-

tion).

Press the buttons to switch between

“FRONT-R” and “FRONT-L”. Select

the position when measuring the

distance to be corrected as shown on

the page 26.

2. Press the FUNCTION button 2.

The display switches to Time Alignment Adjustment Screen, allowing time alignment

adjustment.

1. Open the cover of the remote controller in the Network Menu (refer to

page 4).

This switches to Network Menu Setting Screen.

ENG/MASTER 96

CRB1635A_ENG_23-46 08-05-2001 17:08 Page 28