English DJM-2000nexus http://pioneerdj.com/support/ The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. El sitio de asistencia Pioneer DJ mostrado arriba ofrece las preguntas frecuentes, información del software y varios otros tipos de información y servicios que le permitirán usar su producto con mayor confort.
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.
If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal.
Contents How to read this manual In this manual, names of channels and buttons indicated on the product, names of menus in the software, etc., are indicated within square brackets ([ ]). (e.g. [MASTER] channel, [ON/OFF], [File] menu) Before start Features........................................................................................................ 5 What’s in the box......................................................................................... 5 Connections Rear panel.................
Features This unit is a high-performance DJ mixer designed for professional DJs, which, in addition to its high sound quality design, is equipped with a multi-touch panel and various types of interface and effect functions enabling new styles of DJ performing. TOUCH PANEL EFFECT This unit uses a large 5.8-inch LCD multi-touch panel.
Connections Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Refer to the operating instructions for the component to be connected. Connect the power cord after all the connections between devices have been completed. Be sure to use the included power cord.
Analog player Analog player Cassette deck, CD player, etc. (line level output devices) L R L R PHONO L CH4 Digital audio output device L R L R CH3 CD English Connecting input terminals LINE SIGNAL GND CH2 CD L LINE CH1 CD L PHONO CD L SIGNAL GND DIGITAL OFF ON POWER OUT CONTROL CD DIGITAL CD DIGITAL R CH3 IN CH2 CH4 CH1 CONTROL CD DIGITAL MASTER2 REC OUT L MASTER1 R L MASTER ATT.
Connecting to the control panel Microphones About the USB audio driver software MIC CD /DIGITAL PHONO USB 1/2 CD /DIGITAL TRIM Software end user license agreement OVER +9 MIC LEVEL - HI 4 2 HI EQ +12 -12 1 +6 -26/ LOW TALK OFF ON OVER 0 -26 -1 MID -2 +12 -12 10 7 0 EQ/ -3 ISO -5 +6 -26/ -7 EQ/ ISO -26 CUE 10 HEADPHONES MONO SPLIT 9 STEREO 8 7 6 5 4 MIXING 3 2 1 0 CUE MASTER Headphones 0 A THRU B A CROSS FADER ASS PHONES This Software End User License Agree
You agree that any breach of this Agreement’s restrictions would cause Pioneer irreparable harm for which money damages alone would be inadequate. In addition to damages and any other remedies to which Pioneer may be entitled, You agree that Pioneer may seek injunctive relief to prevent the actual, threatened or continued breach of this Agreement. 5 TERMINATION Pioneer may terminate this Agreement at any time upon Your breach of any provision.
1 Insert the included CD-ROM into the computer’s CD drive. The CD-ROM folder appears. ! Double-click the CD icon on the desktop when folders are not displayed after a CD-ROM has been loaded. 2 Double-click [DJM-2000_M_X.X.X.dmg]. The [DJM-2000AudioDriver] menu screen appears. 3 Double-click [DJM-2000AudioDriver.pkg]. The driver installation screen appears. 4 Check the details on the screen and click [Continue Anyway].
English Operation Control Panel OFF ON POWER MASTER MIC 1 CD /DIGITAL PHONO USB 1/2 CD /DIGITAL c c TRIM OVER 2 - 0 HI e 7 3 EQ +12 -12 +12 LOW TALK OFF ON OVER INST FX LOW HPF LPF PARAMETER LOW 6 MIN +6 -26/ FILTER 10 MID HI MAX MIN e MAX MIN MAX +6 -26/ 1/2 3/4 1/1 2/1 4/1 -2 EQ/ - 3 ISO -7 LEVEL/DEPTH n p AUTO /TAP TAP MIN - 24 dB dB +6 -26/ 7 MAX -1 MID -2 EQ/ r MIN -5 +6 -26/ -7 - 10 LOW - 15 - 24 L f BALANCE FILTER g MAX MI
r ON/OFF button (page 18) s LIVE SAMPLER (UTILITY, WAKE UP) buttons (page 17, page 27) t SYNC MASTER/MIDI button (page 19) u MIX button (page 15) v REMIX button (page 16) w ON/OFF button (TOUCH PANEL EFFECT) (page 15) x Crossfader (page 12) Basic Operation Outputting sound 1 Press [POWER] button. Turn on the power of this unit.
— [MONO SPLIT]: The sound of the channels for which the [CUE] button is pressed is output from the headphones output’s left channel, the [MASTER] channel sound is output from the right channel. — [STEREO]: The sound of the channels for which the [CUE] button is pressed is output from the headphones in stereo. 4 Turn the [MIXING] control. This adjusts the monitor volume balance of the sound of channels for which the [CUE] button is pressed and the sound of the [MASTER] channel.
Adjusting the sound quality Advanced Operations Turn the [MIC] channels’ [EQ (HI, LOW)] controls. Refer to Specifications on page 31 for the range of sound that can be adjusted by each control. Switching between monaural and stereo audio This switches the sound output from the [MASTER1], [MASTER2], [BOOTH], [REC OUT], [PHONES], [DIGITAL OUT] and [USB] terminals between monaural and stereo. Switch the [MONO, STEREO] selector switch. — [MONO]: Outputs monaural audio. — [STEREO]: Outputs stereo audio.
The [USER SETUP] screen is displayed. 2 Press the settings item button and select [QUANTIZE]. The QUANTIZE function’s setting screen is displayed. ! [QUANTIZE] is added to the settings item button on the [USER SET UP] screen. FREQUENCY MIX The currently playing sound is divided into seven frequency bands that are displayed graphically. Fader control on the touch panel makes it easier to grasp the details and mix two channels or swap instruments (parts).
The changed order and timing can be played repeatedly in units of the length of the sampled sound (4 or 8 beats). 1 2 3 4 7 4 Press the roll pad. The assigned sound is played. If the roll pad is pressed and held for a time longer than the assigned sound, the assigned sound is played repeatedly. SIDECHAIN REMIX 8 5 9 When this function is used, the sound of the specified frequency band for the specified channel can be used as the trigger to apply effects to the sounds of other channels.
The [TRIGGER] menu appears. 6 Slider 5 At [TRIGGER CH (SAMPLING/TRIGGER CH)], select [CH3]. The sound is played from the position at which the touch panel was touched. This is only displayed when previewing the sound. 7 PRE-REC SAVE The sound is sampled from a point 8 seconds before the button was pressed. This selects the channel to be used as the effect trigger. ! When [SAME] is pressed, the same channel as the one selected in the [CH] section is selected as the trigger.
FILTER (parameter 1) PARAMETER (parameter 2) NOISE White noise generated inside this unit is mixed in to the sound of the channel via the filter and output. Sets the cut-off frequency for the filter through which the white noise passes. Sets the volume of the white noise. ZIP Lowers the pitch of the channel’s sound for output. Sets the amount of pitch shifting for lowering the pitch. Sets the balance between the original sound and the effect sound.
! For MIDI channel setting instructions, see Changing the settings on page 27. 1 Connect this unit’s [USB] terminal to the computer. Using the SYNC MASTER function For details about connections, see Connecting a computer on page 8. The beat positions and BPMs of tracks being played on Pioneer DJ players supporting the beat sync function (CDJ-2000nexus) can be synchronized. 2 Launch the DJ software.
List of MIDI Messages Control Panel Category CH1 CH2 CH3 CH4 Crossfader CURVE SETTING MASTER CH SELECT BEAT EFFECT EFFECT SELECT 20 En SW Name VR VR VR VR VR VR SW BTN VR VR VR VR VR VR SW BTN VR VR VR VR VR VR SW BTN VR VR VR VR VR VR SW BTN VR SW SW TRIM HI MID LOW FILTER Channel fader CROSS FADER ASSIGN CUE TRIM HI MID LOW FILTER Channel fader CROSS FADER ASSIGN CUE TRIM HI MID LOW FILTER Channel fader CROSS FADER ASSIGN CUE TRIM HI MID LOW FILTER Channel fader CROSS FADER ASSIGN CUE Crossf
EFFECT FREQUENCY INST FX MIC HEADPHONES LINK Touch panel control MIDI SW Name HI MID LOW NOISE ZIP CRUSH JET HPF LPF PARAMETER HI LOW LEVEL MIXING CUE CUE SYNC MASTER/MIDI MIX REMIX ON/OFF START STOP MIDI Messages SW Type VR VR VR BTN BTN BTN BTN BTN BTN VR VR VR VR VR BTN BTN BTN BTN BTN BTN BTN BTN MSB Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn FA FC 66 67 68 55 56 57 69 6A 6B 6C 1E 1F 1A 1B 73 6E 6F 70 71 72 — — Trigger/Toggle LSB dd dd dd dd dd dd dd dd dd dd dd dd dd dd dd dd
BEAT SLICE REMIX Switch position Category BEAT SLICE REMIX 1 22 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 SW Type MIDI Messages MSB Trigger/Toggle LSB Notes 1 BTN 9n 5D dd — — — Trigger/Toggle OFF=0, ON=127 2 BTN 9n 5E dd — — — Trigger/Trigger OFF=0, ON=127 3 BTN 9n 41 dd — — — Trigger/Trigger OFF=0, ON=127 4 BTN 9n 60 dd — — — Trigger/Trigger OFF=0, ON=127 5 BTN 9n 61 dd — — — Trigger/Trigger
Category Switch position TYPE A MIDI Messages MSB Trigger/Toggle LSB Notes [PAGE1]–9 BTN 9n 5D dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–10 BTN 9n 5E dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–11 BTN 9n 5F dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–12 BTN 9n 60 dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–13 BTN 9n 61 dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–14 BTN 9n 62 dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–15 BTN
Category Switch position TYPE C 1 4 7 10 2 3 5 6 8 9 11 12 TYPE D 1 2 3 4 5 24 En SW Type MIDI Messages MSB Trigger/Toggle LSB Notes [PAGE1]–1 BTN 9n 3C dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–2 BTN 9n 3D dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–3 BTN 9n 3E dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–4 BTN 9n 3F dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–5 BTN 9n 40 dd — — — Trigger/Toggle OFF=0, ON=127 [PAGE1]–6 B
REVERB 1 2 Direct sound DELAY 1 Level English Types of BEAT EFFECT Early reflected sound Reverberations 1% Original (4 beats) Time 1/2 delay (8 beats) 100% This function outputs a delay sound once according to the beat button’s fraction. When 1/2 beat delay sound is added, 4 beats become 8 beats. This function adds a reverberation effect to the input sound. Beat buttons (parameter 1) Set the reverberation effect and room size.
REV ROLL1 2 PHASER 1 Phase shift Original Time Cycle Effect turned on The phaser effect changes according to the beat button fraction. 1/1 reverse roll Reversed and repeated This function records the input sound at the point at which the [ON/OFF] button is pressed, reverses the recorded sound and repeats it according to the beat button’s fraction. Beat buttons (parameter 1) The effect time is set from 1/8 to 4/1 with respect to 1 beat of BPM time.
English Changing the settings 1 Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least 1 seconds. The [USER SETUP] mode setting screen is displayed. The [LIVE SAMPLER (UTILITY, WAKE UP)] indicator flashes. ! To display the [CLUB SETUP] screen, first turn this unit’s power off, then press [POWER] while pressing [LIVE SAMPLER (UTILITY, WAKE UP)]. 1 2 Press the setup item button. The selection items appear. 3 Select the setup item. Select the item on the touch panel and enter it.
Additional information Troubleshooting ! ! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
! ! ! Small black or shining points may appear on the liquid crystal display. This is a phenomenon inherent to liquid crystal displays; this is not a malfunction. When using in cold places, the liquid crystal display may be dark for a while after this unit’s power is turned on. It will reach the normal brightness after a while. When the liquid crystal display is exposed to direct sunlight, the light will reflect off it, making it difficult to see. Block the direct sunlight.
Block Diagram MIC PHONES ADC MIC PHONES DAC MASTER DAC MASTER1 CD TRIM ADC CH1 PHONO CH1 DIR DIGITAL IN DAC BOOTH DAC SEND DAC D_OUT SRC MASTER2 MUTE REC MUTE BOOTH MUTE SEND SRC USB AUDIO DATA SRC DIGITAL IN DIR CH2 CD CH2 REC MUTE D SP TRIM DIGITAL OUT ADC LINE CD DIT TRIM SRC ADC CH4 DIGITAL/USB SELECT CH3 LINE DIR CH3 DIGITAL IN USB Type B CH3 DIGITAL/USB SELECT CH2 DIGITAL/USB SELECT CH1 DIGITAL/USB SELECT SRC USB IC USB AUDIO DATA SRC DIGITAL
General Power requirements..................................... AC 110 V to 240 V, 50 Hz/60 Hz Power consumption................................................................................ 42 W Power consumption (standby).............................................................. 0.4 W Main unit weight.................................................................................... 8.6 kg External dimensions............... 430 mm (W) × 107.9 mm (H) × 404 mm (D) Tolerable operating temperature.....
Le damos las gracias por la adquisición de este producto Pioneer. Lea a fondo estas instrucciones de utilización para que aprenda a utilizar correctamente su modelo. Después de haber terminado de leer estas instrucciones, guárdelas en un lugar seguro para, en caso de ser necesario, consultarlas en el futuro. En algunos países o regiones, la forma de la clavija de alimentación y de la toma de corriente pueden ser algunas veces diferentes de la mostrada en las ilustraciones explicativas.
PRECAUCIONES CONCERNIENTES A LA MANIPULACIÓN DEL CABLE DE ALIMENTACIÓN Tome el cable de alimentación por la clavija. No extraiga la clavija tirando del cable. Nunca toque el cable de alimentación cuando sus manos estén mojadas, ya que esto podría causar cortocircuitos o descargas eléctricas. No coloque la unidad, algún mueble, etc., sobre el cable de alimentación. Asegúrese de no hacer nudos en el cable ni de unirlo a otros cables.
Contenido Cómo leer este manual En este manual, los nombres de canales y botones indicados en el producto, los nombres de menús del software, etc., se indican dentro de corchetes ([ ]). (p. ej.: Canal [MASTER], [ON/OFF], menú [File]) Antes de empezar a usar la unidad Características............................................................................................. 5 Contenido de la caja....................................................................................
Antes de empezar a usar la unidad PRO DJ LINK Cuando se conectan mediante un cable LAN un reproductor DJ de Pioneer compatible con PRO DJ LINK (p. ej. CDJ-2000nexus, CDJ-2000, CDJ-900), un ordenador que tiene instalado rekordbox y esta unidad se pueden usar las funciones PRO DJ LINK siguientes. Para conocer detalles, vea Acerca de PRO DJ LINK en la página 15.
Conexiones Asegúrese de desconectar la alimentación y desenchufar el cable de alimentación de la toma de corriente siempre que haga o cambie conexiones. Consulte el manual de instrucciones del componente que va a ser conectado. Conecte el cable de alimentación después de terminar las conexiones entre los aparatos. Asegúrese de usar el cable de alimentación incluido.
Conexión de terminales de entrada Reproductor analógico L R CH4 L R L R CH3 CD LINE SIGNAL GND CH2 CD L Español L R PHONO L Reproductor analógico Platina de casete, reproductor CD, etc. (aparatos de salida de nivel de línea) Aparato de salida de audio digital LINE CH1 CD L PHONO CD L SIGNAL GND DIGITAL OFF ON POWER OUT CONTROL CD DIGITAL CD DIGITAL R CH3 IN CH2 CH4 CH1 CONTROL CD DIGITAL MASTER2 REC OUT L MASTER1 R L MASTER ATT.
Conexión al panel de control Micrófonos Acerca del software de controlador de audio USB MIC CD /DIGITAL PHONO USB 1/2 CD /DIGITAL Este software controlador es un programa exclusivo que se usa para introducir y para enviar señales de audio desde el ordenador. Para usar esta unidad conectada a un ordenador en el que se ha instalado Windows o Mac OS, instale de antemano el software controlador en el ordenador.
3 EXCLUSIÓN DE GARANTÍAS 4 INDEMNIZACIONES Y RECURSOS ANTE INCUMPLIMIENTO CONTRACTUAL Usted acepta que cualquier incumplimiento de las limitaciones del presente Contrato originarán daños irreparables a Pioneer que no podrán verse compensados únicamente con una indemnización por daños y perjuicios.
4 Lea cuidadosamente el Contrato de Licencia del Software y, si acepta las disposiciones, ponga una marca de verificación en [Acepto.] y haga clic en [OK]. ! ! Si no acepta las disposiciones del Contrato de Licencia del Software, haga clic en [Cancelar] y detenga la instalación. 5 Siga con la instalación según las instrucciones de la pantalla.
Ajuste del tamaño de la memoria intermedia (Windows) Use este procedimiento para ajustar la capacidad de la memoria intermedia del ordenador cuando se usa el software controlador ASIO. Español Haga clic en el menú [Iniciar] de Windows >[Todos los programas]>[Pioneer]>[DJM-2000]>[Utilidad de configuración del DJM-2000 ].
Operación Panel de control OFF ON POWER MASTER MIC 1 CD /DIGITAL PHONO USB 1/2 CD /DIGITAL c c TRIM OVER 2 - 0 HI e 7 3 EQ +12 -12 +12 LOW TALK OFF ON OVER 4 LOW LPF PARAMETER LOW 6 MIN +6 -26/ FILTER 10 MID HI MAX MIN e MAX MIN MAX +6 -26/ 1/2 3/4 1/1 2/1 4/1 -2 EQ/ - 3 ISO -7 LEVEL/DEPTH n p AUTO /TAP TAP MIN - 24 dB dB +6 -26/ 7 MAX -1 MID -2 EQ/ r MIN -5 +6 -26/ -7 - 10 LOW - 15 - 24 L f BALANCE FILTER g MAX MIN 7 CUE R dB
n Control TIME (la página 19) Funcionamiento básico o Control LEVEL/DEPTH (la página 19) p Botón AUTO/TAP (la página 19) Salida de sonido r Botón ON/OFF (la página 19) 1 Pulse el botón [POWER]. s Botones LIVE SAMPLER (UTILITY, WAKE UP) (la página 18, la página 30) Conecte la alimentación de esta unidad.
3 Cambie el conmutador selector [MONO SPLIT, STEREO]. — [MONO SPLIT]: El sonido de los canales para los que se pulsa el botón [CUE] sale por el canal izquierdo de la salida de los auriculares, mientras que el sonido del canal [MASTER] sale por el canal derecho. — [STEREO]: El sonido de los canales para los que se pulsa el botón [CUE] sale por los auriculares en estéreo. 4 Gire el control [MIXING].
Ajuste de la calidad del sonido Gire los controles [EQ (HI, LOW)] de los canales [MIC]. Consulte Especificaciones en la página 34 para conocer el margen de sonido que se puede ajustar con cada control. Esto cambia el sonido que sale por los terminales [MASTER1], [MASTER2], [BOOTH], [REC OUT], [PHONES], [DIGITAL OUT] y [USB] entre mono y estéreo. Cambie el conmutador selector [MONO, STEREO]. — [MONO]: Envía audio mono. — [STEREO]: Envía audio estéreo.
QUANTIZE STATUS INFORMATION Los archivos de música deben analizarse de antemano con el rekordbox para usar la función QUANTIZE. Para instrucciones de cómo analizar archivos de música con el rekordbox, vea el Operating Instructions del rekordbox. ! La función QUANTIZE no se puede usar cuando se selecciona [REVERB], [GATE] o [SEND/RETURN]. ! Para usar la función QUANTIZE, ponga el modo de medición BPM en AUTO.
4 Pulse todos los botones [ >> ]. Todos los faders táctiles se mueven al borde derecho. 5 Pulse el botón [ON/ OFF]. Esto activa el efecto. El botón [ON/ OFF] parpadea cuando se activa el efecto. b Ajuste BPM 6 Mueva el fader de canal para [CH2] al lado posterior. 7 Mueva el fader táctil al lado izquierdo. 1 Pulse [REMIX]. El sonido de las bandas de frecuencia cuyos crossfader han sido movidos se mezcla y sale. ! Cuando se pulsa de nuevo un botón [ON/ OFF], el efecto se apaga.
Para establecer el canal para el muestreo y disparo en [CH3] y mezclar el sonido muestreado con el sonido de [CH2] para la salida: Prepare de antemano esta unidad para que el sonido de [CH2] salga por los terminales [MASTER]. 1 Pulse [REMIX] dos veces. La pantalla [SIDECHAIN REMIX] aparece en el panel táctil. LIVE SAMPLER El sonido de entrada al terminal [MIC] o de salida por los terminales [MASTER] se puede muestrear y reproducir en un reproductor DJ de Pioneer compatible con PRO DJ LINK.
3 Pulse [PRE-REC SAVE]. El sonido para el canal seleccionado en el paso 2 se muestrea desde el punto ubicado 8 segundos antes de pulsar [PRE-REC SAVE]. ! El muestreo es posible durante un máximo de 8 segundos. Vista previa del sonido muestreado BEAT EFFECT Esta función le permite establecer instantáneamente varios efectos según el tempo (BPM = pulsaciones por minuto) de la pista que está reproduciéndose. 1 Pulse el botón [CUE] a la izquierda del panel táctil. 2 Pulse [PREVIEW (STOP)].
! Cuando las BPM se establecen usando el botón [TAP], la fracción de tiempo de compás se establece en 1/1 y el tiempo de un compás (cuarto de nota) se establece como tiempo de efecto. Las BPM se pueden establecer manualmente girando el control [TIME] mientras se pulsa el botón [TAP]. Las BPM se pueden establecer manualmente pulsando el botón de tiempo de compás mientras se pulsa [TAP].
Uso de la pantalla de control MIDI Esta unidad está equipada con cuatro tipos de pantallas de control MIDI. Úselas según su software DJ. 1 Pulse varias veces el botón [SYNC MASTER/MIDI] a la derecha del panel táctil. Español La pantalla [MIDI CONTROL] se visualiza después de la pantalla [SYNC MASTER]. ! La función cambia cada vez que se pulsa el botón [SYNC MASTER/MIDI]. 2 Seleccione un tipo de [TYPE A] a [TYPE D]. Esto selecciona el tipo de pantalla de control MIDI.
Lista de mensajes MIDI Panel de control Categoría CH1 CH2 CH3 CH4 Crossfader CURVE SETTING Nombre de interruptor MSB Disparador/ Conmutador LSB TRIM VR Bn 01 dd — — — — 0-127 VR Bn 02 dd — — — — 0-127 MID VR Bn 03 dd — — — — 0-127 LOW VR Bn 04 dd — — — — 0-127 FILTER VR Bn 05 dd — — — — 0-127 Fader de canal VR Bn 11 dd — — — — 0-127 0, 64, 127 CROSS FADER ASSIGN Interruptor Bn 41 dd — — — — CUE BTN Bn 46 dd — — — Disparado
Categoría Nombre de interruptor TIME BEAT EFFECT Mensajes MIDI Tipo de interruptor VR MSB Bn 0D Disparador/ Conmutador LSB MSB Bn 2D LSB ON/OFF BTN Bn 40 dd — — — Disparador/Conmutador OFF=0, ON=127 BTN Bn 45 dd — — — Disparador/Conmutador OFF=0, ON=127 CUE BTN Bn 4B dd — — — Disparador/Conmutador OFF=0, ON=127 TAP BTN Bn 4E dd — — — Disparador/Disparador OFF=0, ON=127 LEVEL/DEPTH VR Bn 5B dd — — — — 0-127 DELAY BTN Bn 2A dd — — — Disparador
Panel táctil FREQUENCY MIX, SIDECHAIN REMIX Categoría Nombre de interruptor Fader táctil 1 FREQUENCY MIX SIDECHAIN REMIX 24 Es Mensajes MIDI Tipo de interruptor VR MSB Bn 38 Disparador/ Conmutador LSB dd — — — — Notas 0 - 127 (parte superior de la pantalla) Fader táctil 2 VR Bn 4C dd — — — — 0-127 Fader táctil 3 VR Bn 4D dd — — — — 0-127 Fader táctil 4 VR Bn 74 dd — — — — 0-127 Fader táctil 5 VR Bn 75 dd — — — — 0-127 Fader táctil 6 VR Bn 76 dd
BEAT SLICE REMIX Categoría 1 3 4 5 6 2 7 Tipo de interruptor MSB 1 BTN 9n LSB 5D dd — — — Disparador/ Conmutador Notas Disparador/ Conmutador OFF=0, ON=127 2 BTN 9n 5E dd — — — Disparador/Disparador OFF=0, ON=127 3 BTN 9n 41 dd — — — Disparador/Disparador OFF=0, ON=127 4 BTN 9n 60 dd — — — Disparador/Disparador OFF=0, ON=127 5 BTN 9n 61 dd — — — Disparador/Disparador OFF=0, ON=127 6 BTN 9n 62 dd — — — Disparador/Disparador OFF=0, ON=127
MIDI CONTROL Posición del conmutador Categoría TYPE A Notas [PAGE1]–9 BTN 9n 5D dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–10 BTN 9n 5E dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–11 BTN 9n 5F dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–12 BTN 9n 60 dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–13 BTN 9n 61 dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–14 BTN 9n 62 dd — — — Disparador/Conmutador OFF=0
Posición del conmutador Categoría 1 4 7 10 2 3 5 6 8 9 11 12 TYPE D 1 2 3 4 5 Mensajes MIDI MSB Disparador/Conmutador LSB Notas [PAGE1]–1 BTN 9n 3C dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–2 BTN 9n 3D dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–3 BTN 9n 3E dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–4 BTN 9n 3F dd — — — Disparador/Conmutador OFF=0, ON=127 [PAGE1]–5 BTN 9n 40 dd — — — Disparador/Conmutador O
Tipos de BEAT EFFECT REVERB 1 2 Sonido directo Sonido reflejado pronto DELAY 1 Nivel Original (4 tiempos de compás) Reverberaciones 1% Tiempo 1/2 retardo (8 tiempos de compás) Esta función da salida a un sonido de retardo una vez según la fracción del botón de tiempo de compás. Cuando se añade un sonido de retardo de 1/2 tiempo de compás, 4 tiempos de compás se convierten en 8 tiempos de compás.
REV ROLL 1 2 PHASER 1 Desplazamiento de fase Original Tiempo Ciclo Efecto encendido Invertido y repetido Esta función graba el sonido de entrada en el punto en que se pulsa el botón [ON/OFF], invierte el sonido grabado y lo repite según la fracción del botón de tiempo de compás. Botones de tiempos de compás (parámetro 1) El tiempo de efecto se ajusta de 1/8 a 4/1 con respecto a 1 tiempo de compás del tiempo BPM. Control TIME (parámetro 2) Use esto para establecer el tiempo de efecto.
Cambio de los ajustes 1 Pulse [LIVE SAMPLER (UTILITY, WAKE UP)] durante un mínimo de 1 segundo. Se visualiza la pantalla de ajuste de modo [USER SETUP]. El indicador [LIVE SAMPLER (UTILITY, WAKE UP)] parpadea. ! Para visualizar la pantalla [CLUB SETUP], desconecte primero la alimentación de esta unidad y luego pulse [POWER] mientras pulsa [LIVE SAMPLER (UTILITY, WAKE UP)]. 1 2 Pulse el botón de elemento de configuración. Los elementos de selección aparecen. 3 Seleccione el elemento de configuración.
Información adicional Solución de problemas ! La operación incorrecta se confunde a menudo con un problema o un fallo de funcionamiento. Si piensa que algo funciona mal con este componente, compruebe los puntos de abajo. Algunas veces, el problema puede estar en otro componente. Inspeccione los otros componentes y los aparatos eléctricos que esté utilizando.
Acerca de la pantalla de cristal líquido ! ! ! En la pantalla de cristal líquido pueden aparecer pequeños puntos negros o brillantes. Éste es un fenómeno inherente a las pantallas de cristal líquido y no es ningún fallo de funcionamiento. Cuando se usa en lugares fríos, la pantalla de cristal líquido puede oscurecerse durante un rato después de conectar la alimentación de esta unidad. Tardará un poco de tiempo en alcanzar su brillo normal.
Diagrama en bloques MIC PHONES ADC MIC PHONES DAC MASTER DAC MASTER1 TRIM ADC CH1 PHONO CH1 DIR DIGITAL IN REC DAC BOOTH DAC SEND DAC D_OUT SRC MUTE MASTER2 MUTE REC MUTE BOOTH MUTE SEND SRC USB AUDIO DATA SRC DIGITAL IN DIR CH2 CD CH2 Español CD D SP TRIM DIGITAL OUT ADC LINE CD DIT TRIM SRC ADC CH4 DIGITAL/USB SELECT CH3 LINE DIR CH3 DIGITAL IN USB Type B CH3 DIGITAL/USB SELECT CH2 DIGITAL/USB SELECT CH1 DIGITAL/USB SELECT SRC USB IC USB AUDIO DAT
Especificaciones Generales Requisitos de potencia.................................. CA 110 V a 240 V, 50 Hz/60 Hz Consumo de energía.............................................................................. 42 W Consumo de energía (modo de espera)............................................... 0,4 W Peso de la unidad principal .................................................................. 8,6 kg Dimensiones externas.........
感謝您購買先鋒產品。 請詳閱操作手冊以瞭解正確操作購買機型的方式。 閱畢手冊後,請妥善收藏以便未來參考。 在部分國家或地區中,電源插頭與插座的形狀有時會和圖示不同。不過本機的連接及操作方式完全相同。 २् ϊȁЗ ԥដႬޠӡᓏ ፝Ͻ҉ ๊ᜟήِםϲழԥᓟޠႬಓဵȂڐҭޠ ࣐ឍ֚ٻңȂݨཏҐࠣᐡ෧ϲґ๙ጣޠ ȶӡᓏႬᔇȷȂᗘռആԚដႬޠӡᓏȄ ݨཏ ࣐ᗘռដႬӡᓏȂ፝ϽܷڤαίᇑȞܗन८ ݗȟȂпᗘռដႬڨܗ།ȂᐡϲณӉեѠٽ ᆱঔٻңޠႮӈȂसሰᆱঔ݉ଡ଼፝ᖓཿ ᆱঔসȄ ๊ᜟήِםϲޠᡚოဵȂԠӶණᒻٻңݨ ཏҐᐡߤܛழϟᐈձІᆱៗ๊ࣻᜱ२्ᇴ ݃Ȅ D3-4-2-1-1_A1_Zhtw ឍ֚ Ґᐡϛ٪ЬȄ࣐٪ЦକЭܗដႬࢉٲȂ፝ϽҐᐡဋܺ ܼӉե౿၇షᡞޠৡᏣȞԄ߇౮ࣶ߇ܗȟߤߗܗڐኹ ܼᅔЬȃᘱЬȃߧϜܗዙᕇᕘძϜȄ D3-4-2-1-3_A1_Zhtw ឍ֚ ಒΚԪඩဋႬྜࠊȂ፝сಡᎨίӗഌϸȈ ႬྜٽޠႬᔇӱঢ়ܗӵୣՅȄ፝ጃᇰҐᐡ
目錄 閱讀本手冊的方式 在本手冊中,產品上的頻道及按鍵名稱、軟體中的選單名 稱等,都會以方括弧表示([ ])。(例如 [MASTER] 聲 道、[ON/OFF]、[File] 功能表) 開始前 功能與特色..................................... 4 包裝內容物..................................... 4 連接 後面板......................................... 5 連接輸入端子................................... 6 連接輸出端子................................... 6 連接至控制面板................................. 7 連接至電腦..................................... 7 關於 USB 音訊驅動程式軟體....................... 7 操作 控制面板...................................... 11 基本操作.....
開始前 功能與特色 本機為一專為專業 DJ 設計的高效能 DJ 混音器,除了高音 質的設計外,還配備適合 DJ 表現的全新樣式多點式觸控 板及各種介面與音效功能。 PRO DJ LINK 在支援 PRO DJ LINK 的先鋒 DJ 播放機(如 CDJ-2000nexus、 CDJ-2000、CDJ-900)、電腦後上安裝 rekordbox,且本機 由 LAN 連接線連接,就能使用以下的 PRO DJ LINK 功能。 關於詳細資訊,請參閱 第 14頁 上 關於 PRO DJ LINK 。 SD & USB 匯出 rekordbox LINK Export TOUCH PANEL EFFECT 本機使用大型 5.
連接 確定在每次接線或變更接線之前,關閉電源並從電源插座上拔下電源線。 有關已連接元件,請參閱操作手冊。 完成裝置之間的所有接線後,請連接電源線。 請確定使用隨附電源線。 後面板 1 2 345 6 CH4 CD 8 9 6 3 7 52 CH3 SIGNAL GND LINE L 345 CH2 CD LINE L a 中文 PHONO L 3 7 5 CH1 CD PHONO L CD SIGNAL GND DIGITAL OFF ON POWER OUT CONTROL CD DIGITAL CD DIGITAL R CH4 CH3 IN CH2 CH1 CONTROL CD DIGITAL R R MASTER2 REC OUT L MASTER1 R L MASTER ATT.
連接輸入端子 PHONO L CH4 CH3 CD LINE SIGNAL GND CH2 CD L LINE CH1 CD L PHONO CD L SIGNAL GND DIGITAL OFF ON POWER OUT CONTROL CD DIGITAL CD DIGITAL R CH3 IN CH2 CH4 CH1 CONTROL CD DIGITAL R R MASTER2 REC OUT L MASTER1 R L MASTER ATT.
連接至控制面板 關於 USB 音訊驅動程式軟體 本驅動程式軟體為一用於輸入及輸出電腦音訊訊號之專 門程式。若要使用本機連接至安裝 Windows 或 Mac OS 的 電腦,請事先在電腦上安裝驅動程式軟體。 MIC CD /DIGITAL PHONO USB 1/2 CD /DIGITAL 軟體使用權授契約書 TRIM OVER +9 MIC LEVEL - HI 7 0 4 2 HI EQ 10 +12 -12 +12 1 +6 -26/ LOW TALK OFF ON OVER 0 -26 -1 MID -2 EQ/ -3 ISO -5 +6 -26/ -7 EQ/ ISO -26 CUE 10 HEADPHONES MONO SPLIT 9 STEREO 8 7 6 5 4 MIXING 3 2 1 0 CUE MASTER LEVEL - 中文 -12 軟體使用權授契約書(以下簡稱「契約」)是由您(安裝 程式的個人及安裝程式之個人所代表的任一法律個體) (以下簡稱「您」)及 PIONEER CORPORATIO
4 違約的賠償與補償 您同意因任何違反本契約約定之行為,將導致 Pioneer 發 生無法挽回之損害,且該等損害無法以金錢加以賠償,因 此除了賠償以及任何 Pioneer 有權取得之其他補償之外, 您同意 Pioneer 得尋求任何法令之救濟,包括假扣押或假 處分等保全方式,以避免發生於本契約實際上的、具威脅 性的或持續的違約行為。 5 契約終止 Pioneer 有權在您違反任一條款時,隨時終止本契約。當 本契約終止後,您必須停止使用該程式,並將其從安裝之 電腦或行動裝置中永久刪除,以及銷毀您以任何形式所 持有的程式與使用說明書及其複本,並以書面向 Pioneer 確認您已經從事前述行為。第 2.2,2.3,2.
5 請依照畫面指示進行安裝。 若在安裝進行時畫面上出現 [Windows 安全性 ],請按一 下 [ 仍安裝此驅動程式軟體(I)] 並繼續安裝。 ! 在 Windows XP 上安裝時 若在安裝進行時畫面上出現 [ 硬體安裝 ],請按一下 [ 繼續安裝 ] 並繼續安裝。 ! 完成安裝程式後,將出現完成訊息。 ! 完成驅動程式軟體安裝後,您必須重新開機。 安裝步驟(Macintosh) 1 插入附帶的 CD-ROM 到電腦的 CD 驅動器。 出現 CD-ROM 資料夾。 ! 裝入 CD-ROM 後未顯示資料夾時,按兩下桌面上的 CD 圖示。 2 按兩下 [DJM-2000_M_X.X.X.dmg]。 隨即顯示 [DJM-2000AudioDriver] 選單畫面。 3 按兩下 [DJM-2000AudioDriver.
檢查驅動程式軟體的版本 檢查程序(Windows) 按一下 Windows [ 開始 ] 功能表 >[ 所有程 式 ]>[Pioneer]>[DJM-2000]>[DJM-2000 版本顯示公用程 式 ]。 隨即顯示 [ 版本 ] 畫面。 檢查程序(Macintosh) 按一下 [ 蘋果 ]>[ 關於這台 Mac]>[ 系統描述 ]>[ 延伸功 能 ]>[DJM-2000 USBAudio]。 隨即顯示 [ 版本 ] 畫面。 檢查驅動程式軟體上的最新資訊 如需本裝置專用驅動程式軟體的最新資訊,請瀏覽本公 司網站,如下所示。 http://pioneerdj.
操作 控制面板 OFF ON POWER MASTER MIC 1 CD /DIGITAL PHONO USB 1/2 CD /DIGITAL c c TRIM OVER 0 HI e HI 3 EQ +12 -12 +6 -26/ LOW MID 4 +6 -26/ +6 -26/ MID +6 -26/ ZIP HPF CRUSH LPF f 6 7 MIN MAX 7 MAX MIN MAX MIN HI e MAX MIN MAX -7 1/4 1/8 1/2 3/4 1/1 2/1 4/1 MID -2 EQ/ - 3 -5 -5 -7 ISO TIME LEVEL/DEPTH p AUTO /TAP -7 1 0 -1 MID -2 EQ/ +6 -26/ -7 - 10 LOW - 15 - 24 L f f FILTER MIN BALANCE FILTER g MAX MIN 7 CUE R dB +6 -26/
p AUTO/TAP 按鍵(第 18頁) q TAP 按鍵(第 18頁) r ON/OFF 按鍵(第 18頁) s LIVE SAMPLER(UTILITY、WAKE UP)按鍵(第 17 頁 , 第 30頁) t SYNC MASTER/MIDI 按鍵 ( 第 20頁 ) u MIX 按鍵(第 15頁) v REMIX 按鍵(第 16頁) w ON/OFF 按鍵(TOUCH PANEL EFFECT) (第 15頁) x 交互推桿(第 12頁) y MASTER 控制鍵(第 12頁) z 主位準指示燈(第 12頁) A BALANCE 控制鍵(第 14頁) B MONO、STEREO 選擇器開關(第 14頁) C BOOTH MONITOR 控制鍵(第 14頁) D START/STOP(SNAPSHOT)按鍵(第 20頁) E ON/OFF(MIDI)按鍵(第 20頁) F CH EQ(ISOLATOR、EQ)選擇器開關(第 12頁) G CH FADER( 、 )選擇器開關(第 13頁) H CROSS FADER( 、 、 )選擇器開關(第 13頁) 請勿用力拉扯頻道音量滑鈕及交叉音控器旋鈕。 旋鈕
3 切換 [MONO SPLIT、STEREO] 選擇器開關。 — [MONO SPLIT]:按下 [CUE] 按鍵的聲道聲音會從 耳機輸出的左聲道輸出,而 [MASTER] 的聲道聲音 會從右聲道輸出。 — [STEREO]:按下 [CUE] 按鍵的聲道聲音會以立體 聲從耳機輸出。 4 轉動 [MIXING] 控制鍵。 此項目可調整按下耳機 [CUE] 按鍵後的聲道聲音與 [MASTER] 聲道聲音的監控音量平衡。 監控電腦的音效 請事先至 rekordbox 的 [ 檔案 ] > [ 喜好設定 ] > [ 音訊 ] 檢查 [ 使用 PioneerDJ 混音器的「連接監視」功能。]。 另請參閱 rekordbox 操作手冊。 1 連接耳機至 [PHONES] 端子。 2 連接安裝 rekordbox 的電腦。 有關連線的說明,請參閱 第 6頁 上 連接輸入端子 。 3 選擇使用 rekordbox 監控的音軌。 4 按下 [LINK] 的 [CUE] 按鍵。 使用 rekordbox 選擇的音軌會從耳機輸出。 ! 再次按下 [CUE] 按鍵時,將取消監控。 ! 可如以耳機監控音效 (步驟 3 至 5)執行
切換單聲道與立體聲音訊 進階操作 可切換單聲道與立體聲間的 [MASTER1]、[MASTER2]、 [BOOTH]、[REC OUT]、[PHONES]、[DIGITAL OUT] 及 [USB] 端子輸出聲音。 關於 PRO DJ LINK 切換 [MONO、STEREO] 選擇器開關。 — [MONO]:輸出單聲道音訊。 — [STEREO]:輸出立體聲音訊。 調整 L/R 音訊平衡 可調整 [MASTER1]、[MASTER2]、[BOOTH]、[REC OUT]、[PHONES]、[DIGITAL OUT] 及 [USB] 端子的 輸出聲音左/右平衡。 1 將 [MONO、STEREO] 選擇器開關設為 [STEREO]。 2 轉動 [BALANCE] 控制鍵。 音效會依據轉動 [BALANCE] 控制鍵的方向及所在位置 而變更左/右平衡。 ! 旋轉至最右端的位置只會輸出立體聲音訊的右側音 效。 旋轉至最左端的位置只會輸出立體聲音訊的左側 音效。 音訊會從 [BOOTH] 端子輸出 轉動 [BOOTH MONITOR] 控制鍵。 調整 [BOOTH] 端子的音訊訊號輸出音量。 在
! 若要使用 QUANTIZE 功能,請將 BPM 測量模式設為 AUTO。 ! 在結合 CDJ-2000 或 CDJ-900 使用之前,請先更新 DJ 播放機的韌體至 4.
3 按下聲道指派按鍵就能選擇左側的 [CH2],以及右側的 [CH3]。 在 [CH3] 播放的音效個別頻率頻段音量會顯示在控制面 板右側上。 SEQUENCE 9 LENGTH 選 擇 SYNC SOURCE 選擇作為操作基準的節奏資訊。 ! CHANNEL:選擇音訊輸入聲道的 節奏資訊作為基準。 ! SYNC MASTER:選擇主要 BPM 的 節奏資訊作為基準。 ! MANUAL:選擇在 BPM 設定中設 定的 BPM 及節奏位置作為基準。 b BPM 設定 在 SYNC SOURCE 選擇 [MANUAL] 後,請指定作為此處基準的 BPM 及節 奏位置。 ! a/b:增加或減少 BPM 值。 ! BPM 顯示幕:顯示作為操作基準的 BPM 數值。若無法取得節奏資訊, 顯示幕會閃爍。 ! TAP:輕按此按鍵 2 次以上時,將 開始計算按下的間隔並在 BPM 顯示 幕區域中顯示為 BPM 值。 4 按下所有 [ >> ] 按鍵。 所有觸控推桿移至右側。 a 5 按下 [ON/ OFF] 按鍵。 按下後可開啟音效。 開啟音效後,[ON/ OFF] 會閃爍。 6 移動 [CH2] 的聲道推桿至
1 CH 可選擇要套用音效的聲道。 2 HOLD 這會保留音效的參數資訊(觸碰控 制區域的位置)。 3 EFFECT 可選擇音效的類型。 4 LEVEL/ DEPTH 5 EXIT 利用此方式可調整套用音效的數 量。 用來關閉 [TRIGGER] 功能表。 TRIGGER 6 (SAMPLING/ 用來開啟 [TRIGGER] 功能表。 TRIGGER) TRIGGER BAND 8 控制區域 使用這些步驟可選擇要作為觸發器 使用的頻率頻段。 使用此方式可變更音效的參數。 TRIGGER CH 可選擇當作音效觸發器使用的聲 9 (SAMPLING/ 道。 TRIGGER CH) a 觸發器指示燈 依照不同頻率頻段自動偵測到的節 奏而閃爍。 設定 [CH3] 的取樣及觸發聲道,並混合取樣音效及 [CH2] 音效進行輸出: 預先準備好本機,以便從 [MASTER] 端子輸出 [CH2] 聲 音。 6 在 [TRIGGER BAND] 時,按下 [MID] 及 [HI]。 可選擇設為音效觸發器的頻率頻段。 僅選擇 [LOW](低音)。 7 按下 [ON/ OFF] 按鍵。 按下
6 滑桿 7 PRE-REC SAVE 聲音會從觸碰觸控面板時的位置播 放。 只有在預覽聲音時才會顯示。 效果名稱 說明 FILTER(參數 PARAMETER 1) (參數 2) NOISE 本機內產生的 白色雜訊會透 過濾波器混合 至聲道聲音並 輸出。 設定濾波器 通過白色雜 訊的截止頻 率。 設定白色雜 訊的音量。 ZIP 設定用於降 降低輸出聲道 低音高的音 聲音的音高。 高移轉量。 設定原始聲 音與音效聲 音的平衡。 CRUSH 變更輸出聲道 設定輸入聲 的聲音為破碎 音破碎的程 的聲音。 度。 順時鐘轉動 的愈多,壓迫 的音效會愈 多。 JET 新增輸出的雙 設定雙聲音 聲音效。 效。 順時鐘轉動 的愈多,壓迫 的音效會愈 多。 HPF 順時鐘轉動 透過高通濾波 設定濾波器 的愈多,壓迫 器輸出聲音。 的截止頻率。 的音效會愈 多。 LPF 順時鐘轉動 透過低通濾波 設定濾波器 的愈多,壓迫 器輸出聲音。 的截止頻率。 的音效會愈 多。 在按下按鍵前,會從 8 秒開始取樣聲 音。 REC (REC 8 STOP) 從按下按鍵的時刻起,最多可取樣
1 按下 [AUTO/TAP] 按鍵。 選擇 BPM 測量模式。 — [AUTO]:從輸入的音訊訊號中自動測量 BPM。 開 啟本機的電源後,可設定 [AUTO] 模式。 — [TAP]:用手指輕按 [TAP] 按鍵即可手動輸入 BPM。 ! [AUTO]BPM 測量範圍為 70 至 180。因此部分音軌可能 無法正確測量 BPM。 若無法測量 BPM,顯示幕上的 BPM 值會閃爍。 此時,請使用 [TAP] 按鍵手動輸入 BPM。 3 按下 [SEND/RETURN]。 [SEND/RETURN] 閃爍。 4 按下 [ON/ OFF] 按鍵。 通過外接效果器的聲音會從 [MASTER] 聲道輸出。 ! 再次按下此 [ON/ OFF] 按鍵時,即關閉音效。 控制連接的裝置 使用 SYNC MASTER 功能 在支援節奏同步化功能的先鋒 DJ 播放機(CDJ2000nexus)上播放曲目的節奏位置及 BPM 皆可同步化。 3 按下其中一個 [EFFECT SELECT] 按鍵。 可選擇音效的類型。 ! 有關音效類型的詳細資訊,請參閱 第 28頁 上 BEAT EFFECT 的類型 。 ! 若要使用
4 將本機設為同步化主要裝置。 按下 [RELOAD] 按鍵以顯示目前的主要 BPM 值。 按下 [a] 或 [b] 以設定主要 BPM 值。 按下將本機設為同步化主要裝置的 [MIXER] 按鍵。 ! 本機為同步化主要裝置時,可按下 [a] 或 [b] 變更主 要 BPM 值。 使用 MIDI 功能 操作 DJ 軟體 DJM-2000NXS 也可以按照通用 MIDI 格式輸出按鈕以及轉 盤等的操作數據。 當使用 USB 導線與具有內裝式 MIDI 相 容 DJ 軟體的電腦連接時,可以從本機上操作 DJ 軟體。 預先在電腦上安裝 DJ 軟體。 此外,請調整 DJ 軟體的音 訊及 MIDI 設定。 ! 有關 MIDI 聲道設定的說明,請參閱 第 30頁 上 變更 設定 。 1 連接本機的 [USB] 端子至電腦。 如需連線的詳細資料,請參閱 第 7頁 上 連接至電腦 。 2 啟動 DJ 軟體。 3 按下 [MIDI] 部分中的 [ON/OFF]。 開啟 MIDI 功能。 開始傳輸 MIDI 訊息。 ! 移動推桿及控制鍵時,將依據推桿及控制鍵的位置傳 送訊息。有關本機輸出的訊息,請參閱 第 21頁 上 M
MIDI 訊息清單 控制面板 類別 CH1 CH3 CH4 交叉音控器 CURVE SETTING MASTER Bn Bn Bn Bn Bn Bn MIDI 訊息 MSB 01 dd - 02 dd - 03 dd - 04 dd - 05 dd - 11 dd - LSB - - - - - - - - - - - - - - - - - - 0-127 0-127 0-127 0-127 0-127 0-127 Bn 41 dd - - - - 0, 64, 127 Bn Bn Bn Bn Bn Bn Bn 46 06 07 08 09 0A 12 dd dd dd dd dd dd dd - - - - - - - - - - - - - - - - - - - - - 觸發器/切換 - - - - - - OFF=0, ON=127 0-127 0-127 0-127 0-127 0-127 0-127 Bn 42 dd - - - - 0, 64, 127 Bn Bn Bn Bn Bn Bn Bn 47 0C 0E OF 1
類別 CH SELECT SW 名稱 MIDI 訊息 SW 類型 1 2 3 4 MIC A B M BTN BTN BTN BTN BTN BTN BTN BTN Bn Bn Bn Bn Bn Bn Bn Bn MSB 22 23 24 25 26 27 28 29 TIME VR Bn 0D MSB Bn 2D BTN BTN BTN BTN VR BTN BTN BTN BTN BTN BTN BTN BTN BTN BTN BTN BTN VR VR VR BTN BTN BTN BTN BTN BTN VR VR VR VR VR BTN BTN Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn Bn 40 45 4B 4E 5B 2A 2B 2E 2F 35 3D 37 36 3A 3B 39 3E 66 67 68 55 56 57 69 6A 6B 6C 1E 1F 1A 1B 73 6E dd dd dd dd dd
觸控面板 FREQUENCY MIX, SIDECHAIN REMIX 類別 SW 名稱 MSB 觸發器/切換 LSB 注意 VR Bn 38 dd - - - - 0 - 127(畫面的 最上方) 觸控推桿 2 VR Bn 4C dd - - - - 0-127 觸控推桿 3 VR Bn 4D dd - - - - 0-127 VR Bn 74 dd - - - - 0-127 中文 觸控推桿 1 FREQUENCY 觸控推桿 4 MIX 觸控推桿 5 SIDECHAIN REMIX MIDI 訊息 SW 類型 VR Bn 75 dd - - - - 0-127 觸控推桿 6 VR Bn 76 dd - - - - 0-127 觸控推桿 7 VR Bn 77 dd - - - - 0 - 127(畫面的 最下方) 控制區域的 X 軸 VR Bn 1C dd - - - - 0-127 控制區域的 Y 軸 VR Bn 3C
BEAT SLICE REMIX 類別 BEAT SLICE REMIX 1 24 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 MIDI 訊息 切換位置 SW 類型 觸發器/切換 注意 1 BTN 9n 5D dd - - 2 BTN 9n 5E dd - - - 觸發器/切換 OFF=0, ON=127 - 觸發器/觸發器 OFF=0, ON=127 3 BTN 9n 41 dd - - - 觸發器/觸發器 OFF=0, ON=127 4 BTN 9n 60 dd 5 BTN 9n 61 dd - - - 觸發器/觸發器 OFF=0, ON=127 - - - 觸發器/觸發器 OFF=0, ON=127 6 BTN 9n 62 dd - - - 觸發器/觸發器 OFF=0, ON=127 7 BTN 9n 8 BTN 9n 63 dd - - - 觸
MIDI CONTROL 類別 SW 類型 [PAGE1]-9 BTN 9n 5D dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-10 BTN 9n 5E dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-11 BTN 9n 5F dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-12 BTN 9n 60 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-13 BTN 9n 61 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-14 BTN 9n 62 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-15 BTN 9n 63 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-16 BTN 9n 64 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-5 BTN 9n 65 dd - - - 觸發器/切換 OFF=0,
類別 TYPE B 1 2 3 4 5 6 7 8 9 26 Zhtw 10 11 12 MIDI 訊息 切換位置 SW 類型 [PAGE1]-9 VR Bn 01 dd - - - - 0-127 [PAGE1]-10 VR Bn 02 dd - - - - 0-127 [PAGE1]-11 VR Bn 03 dd - - - - 0-127 [PAGE1]-12 VR Bn 04 dd - - - - 0-127 [PAGE2]-9 VR Bn 05 dd - - - - 0-127 [PAGE2]-10 VR Bn 06 dd - - - - 0-127 [PAGE2]-11 VR Bn 07 dd - - - - 0-127 [PAGE2]-12 VR Bn 08 dd - - - - 0-127 [PAGE1]-1 BTN 9n 30 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-2 BTN 9n 31 dd - - - 觸發器/切換 OFF=0, ON=
類別 TYPE C 2 3 4 5 6 7 8 9 10 11 12 TYPE D 1 2 3 4 5 SW 類型 [PAGE1]-1 BTN 9n 3C dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-2 BTN 9n 3D dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-3 BTN 9n 3E dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-4 BTN 9n 3F dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-5 BTN 9n 40 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-6 BTN 9n 41 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-7 BTN 9n 42 dd - - - 觸發器/切換 OFF=0, ON=127 [PAGE1]-8 BTN 9n 43 dd - - - 觸發器/切換 OFF=0, ON=127 [PA
BEAT EFFECT 的類型 REVERB 1 2 DELAY 1 一旦依據節奏按鍵的部分,此功能會輸出延遲聲音。 新增 1/2 節奏延遲聲音後,4 拍節奏會變成 8 拍節奏。 可用來設定從 1/8 至 4/1 的相關 節奏按鈕(參數 1) BPM 時間 1 拍節奏的延遲時間。 可用來設定延遲時間。 TIME 控制鍵(參數 2) 1 至 4000(毫秒) LEVEL/DEPTH 控制鍵 可用來設定原始聲音與延遲聲音 (參數 3) 的平衡。 EFFECT FREQUENCY 可用來設定不同頻段原始聲音及 (參數 4) 延遲聲音間的平衡。 ECHO 1 2 依據節奏按鍵的部分,此功能會數次輸出逐漸衰減的延 遲聲音。 使用 1/1 節奏的回音後,即使已截斷輸入聲音,仍會依據 音軌的節拍淡出延遲聲音。 可用來設定從 1/8 至 4/1 的相關 節奏按鈕(參數 1) BPM 時間 1 拍節奏的延遲時間。 可用來設定延遲時間。 TIME 控制鍵(參數 2) 1 至 4000(毫秒) LEVEL/DEPTH 控制鍵 可用來設定原始聲音與回音間的 (參數 3) 平衡。 EFFECT FREQUENCY 可用來設定
REV ROLL 1 2 相位器效果會依節奏按鍵的部分而變更。 可設定移動相位器效果循環:1/8 節奏按鈕(參數 1) 至 4/1 等相關單一 BPM 節奏的時間。 可設定移動相位器效果的循環。 TIME 控制鍵(參數 2) 10 至 32000(毫秒) 順時鐘轉動的愈多,壓迫的音效會 LEVEL/DEPTH 控制鍵 愈多。 (參數 3) 逆時鐘轉到底時,只會輸出原始聲 音。 EFFECT FREQUENCY 可用來設定不同頻段原始聲音及 (參數 4) 音效聲音間的平衡。 中文 此功能可在按下 [ON/OFF] 按鍵時錄製輸入聲音,且依 據節奏按鍵的部分倒轉並重複錄製的聲音。 設定從 1/8 到 4/1 的相關 BPM 時間 節奏按鈕(參數 1) 1 拍節奏的音效時間。 可用來設定音效時間。 TIME 控制鍵(參數 2) 10 至 4000(毫秒) LEVEL/DEPTH 控制鍵 可用來設定原始聲音及 ROLL 間 (參數 3) 的平衡。 EFFECT FREQUENCY 可用來設定不同頻段原始聲音及 (參數 4) ROLL 間的平衡。 PHASER 1 GATE 1 FILTER 1 此功能可
變更設定 1 按下 [LIVE SAMPLER(UTILITY、WAKE UP)] 至少 1 秒。 顯示 [USER SETUP] 模式設定畫面。 [LIVE SAMPLER(UTILITY、WAKE UP)] 指示燈閃爍。 ! 若要顯示 [CLUB SETUP] 畫面,請先關閉本機電 源,再按下 [POWER] 並同時按下 [LIVE SAMPLER (UTILITY、WAKE UP)]。 1 2 按下設定項目按鍵。 顯示選擇項目。 3 選擇設定項目。 選擇觸控面板上的項目並輸入。 4 變更項目的設定。 選擇觸控面板上的項目並輸入。 ! 按下 [SAVE] 以儲存 [CLUB SETUP] 畫面的變更。 1 設定項目按鍵 5 按下 [EXIT]。 關閉 [USER SETUP] 模式設定畫面。 ! 若要關閉 [CLUB SETUP] 模式設定畫面,請按下 [POWER] 按鍵以關閉本機的電源。 設定喜好設定 以斜體 表示的設定為購買時預設的設定。 模式 選項設定 選擇項目 1 ZONE11 選擇項目 2 BUTTON ACTION MIDI CHANNEL BUTTON ACTION MI
模式 選項設定 選擇項目 2 選擇項目 3 說明 - 設定 [DIGITAL OUT] 端子中聲音輸出 的最大位準。 1 DIGITAL SAMPLING RATE 48 kHz, 96 kHz - 設定數位訊號取樣率。 AUTO STANDBY ON, OFF - 開啟及關閉自動待機功能。 OUTPUT TO BOOTH MONITOR ON, OFF - 設定是否要從 [BOOTH] 端子輸出麥克 風的音訊訊號。 TALK OVER –25 dB, –20 dB, THRESHOLD LEVEL –15 dB, –10 dB - 設定交談敏感度。輸入麥克風的聲音大 於設定音量時,會啟動交談功能。 TALK OVER LEVEL –25 dB, –20 dB, –15 dB, –10 dB - 啟動交談功能時可設定非麥克風聲音 的衰減位準。 TOUCH PANEL - - - 依序按下 [+] 可調整觸控面板的校正 功能。 PEAK LIMITER PEAK LIMITER ON, OFF - 緩和主要裝置輸出的突然、令人不悅的 數位裁剪。
其他資訊 故障排除 ! 不正確的操作方式,常被誤以為是系統問題或故障。如果您認為本元件有問題,請就以下各重點進行檢查。有時候 問題可能出在其他元件上。仔細檢查其他使用的元件和電器設備。如果對照過底下列出的要點還是無法修正問題, 請洽詢離您最近的先鋒授權服務中心或您的經銷商以進行維修。 ! 靜電或其他外部影響會導致播放機無法正常運作。此時,請拔除電源線,然後再重新插入可能可以回復正常運作。 問題 檢查 解決方法 電源是否未開啟。 電源線的連接是否正確? 電源線插頭是否插入 AC 電源插座。 無音效或音效太小聲。 [CD/DIGITAL、PHONO、LINE、 將 [CD/DIGITAL、PHONO、LINE、USB */*] 開關切 換為聲道的輸入來源。 ( 第 12頁 ) USB */*] 開關是否設為正確位 置? 後面板上的 [CD、DIGITAL] 開關 請依據要播放的裝置來設定 [CD、DIGITAL] 開關。 是否正確設定? ( 第 12頁 ) 連接線的連接是否正確? 正確連接連接線。 ( 第 6頁 ) 端子及插頭是否有污垢? 連接前,請清潔端子及插頭。 後面板的 [MASTER
問題 檢查 解決方法 無法測量節拍(BPM)或 音訊輸入位準是否太高或太低? 節拍(BPM)測量值不適 當。 調整 [TRIM] 控制鍵,以便聲道位準指示燈會在約 [0 dB] 的尖峰位準亮起。 ( 第 12頁 ) 測量的節拍(BPM)與 CD - 上表示的節拍有差異。 測量值稍有出入是因為測量 BPM 的方式不同。 MIDI 序列器未同步化。 將 MIDI 序列器的同步化模式設為從屬。 MIDI 序列器的同步化模式是否設 為從屬? 對部分音軌而言,可能無法測量節拍(BPM)。 使用 [TAP] 按鍵來手動輸入節拍。 ( 第 18頁 ) MIDI 控制鍵無作用。 MIDI 聲道是否開啟? 按下 [MIDI] 的 [ON/ OFF] 按鍵。 ( 第 20頁 ) MIDI 設定是否正確? 若要操作本機的 DJ 軟體,必須將本機的 MIDI 訊息指派 至您正在使用的 DJ 軟體。 有關指派訊息的詳細資訊, 請參閱 DJ 軟體的操作手冊。 本機與電腦連接後,未被 驅動程式軟體是否在電腦上正確 電腦識別。 安裝? 請安裝驅動程式軟體。 若已安裝,請重新安裝。 ( 第 7頁 ) 無法從
區塊圖 MIC PHONES ADC MIC DAC PHONES MASTER1 TRIM ADC CH1 PHONO CH1 DIR DIGITAL IN REC DAC BOOTH DAC SEND DAC D_OUT SRC MUTE MASTER2 MUTE REC MUTE BOOTH MUTE SEND SRC USB AUDIO DATA SRC DIGITAL IN DIR CH2 CD CH2 DAC MASTER CD D SP TRIM DIGITAL OUT ADC LINE CD DIT TRIM SRC ADC CH4 DIGITAL/USB SELECT CH3 LINE DIR CH3 DIGITAL IN USB Type B CH3 DIGITAL/USB SELECT CH2 DIGITAL/USB SELECT CH1 DIGITAL/USB SELECT SRC USB IC USB AUDIO DATA SRC DIGITAL IN CH4
規格 一般 電源需求.............AC 110 V 至 240 V、50 Hz/60 Hz 消耗功率..................................... 42 W 耗電量(待機). ............................. 0.4 W 主機重量................................... 8.6 kg 外部尺寸 ..... 430 mm(寬)× 107.9 mm(高)× 404 mm(深) 可容忍的操作溫度................... +5 °C 至 +35 °C 容許操作濕度................ 5 % 至 85 %(無凝結水) Zhtw 中文 音訊部分 取樣率..................................... 96 kHz A/D、D/A 轉換器............................24 位元 頻率特性 CD / LINE / MIC................ 20 Hz 至 20 kHz 噪訊比(額定輸出) PHONO.................
© 2012 PIONEER CORPORATION. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS (THAILAND) CO., LTD. 17th Fl.