PROFESSINAL DJ MIXER DJM-900nexus Firmware Update Manual 1
DJM-900nexus Update Manual Contents DJM-900nexus Update Manual for Microsoft Windows 7....................................1 DJM-900nexus Update Manual for Microsoft Windows Vista..............................7 DJM-900nexus Update Manual for Microsoft Windows XP ...............................13 DJM-900nexus Update Manual for Mac OS X ....................................................19 Error Message and Details (for Windows) .......................................................
DJM-900nexus Update Manual for Microsoft Windows 7 A. Check the decompression file: 1. Unzip the downloaded file Right click on downloaded file and unzip it by "Extract All" on menu. 2. Check the unzipped file Unzipping the ZIP file generates “DJM-900nexus_vxxx” folder. Confirm the following files are contained in the folder. 1. DJM-900nexus_vxxx.exe 2. DJM-900nexus_vxxx.upd 3. Update manual.pdf xxx is version of new firmware. Extension (.exe or .upd) might not show on by the setting of the computer. B.
C. Update the firmware by computer operation: 1. Adjust network setting Open "Control Panel" -> "Network and Internet" -> Network Connections. Open "Network and Sharing Center". Open "Change adapter setting".
Open "Properties" of network device DJM-900nexus connected. (Right click on icon -> Property) Select "Internet Protocol (TCP/IP) and click "Properties". Select "Obtain an IP address automatically", "Obtain DNS server address automatically". Close network Connections by "OK".
Right click on task bar -> Select "Properties". Select "Notification area" -> "Customize". Select "Show icon and notifications" on network. Close "Properties" by "OK". 2. Confirm DJM-900nexus and the computer are connected You might check the status of connection by the icon on task bar (right bottom of picture). Icon Status of connection LAN cable is unconnected. Check the cable is connected. Checking the status of connection. Wait a minute.
3. Start updating Close all of applications before updating. If you were setting firewall by security software, it would not be able to transfer the data to mixer. Please read the operation manual of the security software or canncelt the firewall. Double click "DJM900nexus_vxxx.exe". Start update tool. Select language. Start updating by pressing "Start". NEVER remove power/LAN cable on updating.
Confirm the updating completed. Updating completed when "SUCCESS" message shows. Restart DJM-900nexus. Please adjust network setting as original if you adjusted it in 3-1. D. Check the current DJM-900nexus version to check the update was completed: Press [CUE (BEAT EFFECT)] and [ON/OFF (BEAT EFFECT)] with power button. Move to update mode. Check it is the latest version. Update was completed if it shows "x.xx".
DJM-900nexus Update Manual for Microsoft Windows Vista A. Check the decompression file: 1. Unzip the downloaded file Right click on downloaded file and unzip it by "Extract All" on menu. 2. Check the unzipped file Unzipping the ZIP file generates “DJM-900nexus_vxxx” folder. Confirm the following files are contained in the folder. 1. DJM-900nexus_vxxx.exe 2. DJM-900nexus_vxxx.upd 3. Update manual.pdf xxx is version of new firmware. Extension (.exe or .upd) might not show on by the setting of the computer.
C. Update the firmware by computer operation: 1. Adjust network setting Open "Control Panel" -> "Network and Internet" -> Network Connections. Open "Network and Sharing Center". Open "Change adapter setting".
Open "Properties" of network device DJM-900nexus connected. (Right click on icon -> Property) Select "Internet Protocol (TCP/IP) and click "Properties". Select "Obtain an IP address automatically", "Obtain DNS server address automatically". Close network Connections by "OK".
Right click on task bar -> Select "Properties". Select "Notification area" and check "Network". Close "Properties" by "OK". 2. Confirm DJM-900nexus and the computer are connected You might check the status of connection by the icon on task bar (right bottom of picture). Message & Icon Status of connection LAN cable is unconnected. Check the cable is connected. Checking the status of connection. Wait a minute. DJM-900nexus is connected. Start update tool.
3. Start updating Close all of applications before updating. If you were setting firewall by security software, it would not be able to transfer the data to mixer. Please read the operation manual of the security software or canncelt the firewall. Double click "DJM900nexus_vxxx.exe". Start update tool. Select language. Start updating by pressing "Start". NEVER remove power/LAN cable on updating.
Confirm the updating completed. Updating completed when "SUCCESS" message shows. Restart DJM-900nexus. Please adjust network setting as original if you adjusted it in 3-1. D. Check the current DJM-900nexus version to check the update was completed: Press [CUE (BEAT EFFECT)] and [ON/OFF (BEAT EFFECT)] with power button. Move to update mode. Check it is the latest version. Update was completed if it shows "x.xx".
DJM-900nexus Update Manual for Microsoft Windows XP A. Check the decompression file: 1. Unzip the downloaded file Right click on downloaded file and unzip it by "Extract All" on menu. 2. Check the unzipped file Unzipping the ZIP file generates “DJM-900nexus_vxxx” folder. Confirm the following files are contained in the folder. 1. DJM-900nexus_vxxx.exe 2. DJM-900nexus_vxxx.upd 3. Update manual.pdf xxx is version of new firmware. Extension (.exe or .upd) might not show on by the setting of the computer. B.
C. Update the firmware by computer operation: 1. Adjust network setting Open "Start" -> "Setting" -> "Control Panel" -> Network Connections". Open "Properties" of network device DJM-900nexus connected. (Right click on icon -> Properties) Check the box of "Notify me when this connection has limited or no connectivity". Select "Internet Protocol (TCP/IP) and click "Properties".
Select "Obtain an IP address automatically", "Obtain DNS server address automatically". Close network Connections by "OK". 2. Confirm DJM-900nexus and the computer are connected You might check the status of connection by the icon on task bar (right bottom of picture). Icon Status of connection LAN cable is unconnected. Check the cable is connected. Checking the status of connection. Wait a minute. DJM-900nexus is connected. Start update tool. 3.
16
Start updating by pressing "Start". NEVER remove power/LAN cable on updating. If the waiting picture remains more than 30seconds, the network connection might not work. Press Cannel button and update again after connecting it. Confirm the updating completed. Updating completed when "SUCCESS" message shows. Restart DJM-900nexus. Please adjust network setting as original if you adjusted it in 3-1.
D. Check the current DJM-900nexus version to check the update was completed: Press [CUE (BEAT EFFECT)] and [ON/OFF (BEAT EFFECT)] with power button. Move to update mode. Check it is the latest version. Update was completed if it shows "x.xx".
DJM-900nexus Update Manual for Mac OS X A. Check the decompression file: 1. Unzip the downloaded file Double click on downloaded file and unzip it by "Extract ALL" on menu. 2. Check the unzipped file Unzipping the ZIP file generates “DJM-900nexus_vxxx” folder. 1. DJM-900nexus_vxxx 2. Update manual.pdf xxx is version of new firmware. B. Setup DJM-900nexus to update: Press [CUE (BEAT EFFECT)] and [ON/OFF (BEAT EFFECT)] with power button. Move to update mode.
C. Update the firmware by computer operation: 1. Adjust network setting Open "System Performance" -> "Network" -> "Ethernet" -> "Using DHCP". 2. Confirm DJM-900nexus and the computer are connected You can check the status of connection on "System Performance" -> "Network" -> "Ethernet". LAN cable is unconnected. Check the cable is connected. Checking the status of connection. Wait a minute. DJM-900nexus is connected. Start update tool. 3. Start updating Close all of applications before updating.
Start updating by pressing "Start". NEVER remove power/LAN cable on updating. If the waiting picture remains more than 30seconds, the network connection might not work. Press Cannel button and update again after connecting it. Confirm the updating completed. Updating completed when "SUCCESS" message shows. Restart DJM-900nexus. Please adjust network setting as original if you adjusted it in 3-1.
D. Check the current DJM-900nexus version to check the update was completed: Press [CUE (BEAT EFFECT)] and [ON/OFF (BEAT EFFECT)] with power button. Move to update mode. Check it is the latest version. Update was completed if it shows "x.xx".
Error Message and Details (for Windows) Title Formatting Error Connection Error Data Transfer Error Message Detail Cannot find the EXE file_I1 Cannot find the EXE file. Restart the application. Cannot find the UpdateFile_I4 Cannot find the update file or update file is not correct. Download the file and update again. Cannot connect to the MIXER_I5 Failed connection with mixer. Check the status of network and restart the application.
About trademarks and registered trademarks ・ Pioneer is a registered trademark of PIONEER CORPORATION. ・ Microsoft®, Windows Vista® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. ・ Apple and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. © 2012 PIONEER CORPORATION. All rights reserved.
