DJ Equipment User Manual

20
C. Update the firmware by computer operation:
1. Adjust network setting
Open "System Performance" -> "Network" -> "Ethernet" -> "Using DHCP".
2. Confirm DJM-900nexus and the computer are connected
You can check the status of connection on "System Performance" -> "Network" -> "Ethernet".
LAN cable is unconnected.
Check the cable is connected.
Checking the status of connection.
Wait a minute.
DJM-900nexus is connected.
Start update tool.
3. Start updating
 Close all of applications before updating.
 If you were setting firewall by security software, it would not be able to transfer the data to mixer.
Please read the operation manual of the security software or canncelt the firewall.
<STEP1> Double click "DJM900nexus_vxxx".
Start update tool.
<STEP2> Select language.