DJ MIXER DJM-909 Operating Instructions 1
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.
IMPORTANT NOTICE The serial number for this equipment is located on the bottom plate. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security. WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to lead, a chemical known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
CONTENTS FEATURES CAUTIONS REGARDING HANDLING ...................... 4 Location ........................................................................... 4 Condensation .................................................................. 4 Cleaning the Unit ............................................................ 4 FEATURES ................................................................. CHECKING ACCESSORIES ....................................... CONNECTIONS ........................................
CHECKING ACCESSORIES ÷ ÷ ÷ Hexagonal Allen driver (for cross fader operating load adjust screw) These operating instructions Warranty CONNECTIONS When connecting or changing the connection of units, make sure to first turn off the power switch and disconnect the power cord from the outlet. This mixer is not furnished with any connection cables; when performing connections, use the cables that came provided with your player and other components, or purchase commercially available audio cables. 1.
CONNECTIONS 2. Connecting Foot Switch and Headphones (front panel) Headphones FADER REVERSE CH-1 5 C.F. FADER START CH-2 C.F. 1 CH-1 ON ON ON OFF OFF OFF PHONES C.F. 2 CH-2 PROFESSIONAL 2CHANNEL MIXER 6 DJM-909 FADER CURVE CH-1 FOOT SW CROSS FADER 1 POWER CROSS FADER 2 CH-2 FADER CUT LAG CH-1 OFF MIN Foot switch (pedal switch) MAX CH-2 Foot switch 5 Headphones 6 Allows the connection of a foot switch with a 6.3 mm monaural plug. The foot switch control effect ON/OFF.
PART NAMES AND FUNCTIONS Top Panel (1) 2 1 10 11 MIC PHONO 1 /LINE 1 CD 1 BANK 1 BANK 1 BANK 2 BANK 2 CH-1 PHONO 2 /LINE 2 CD 2 MASTER LEVEL MIC LEVEL TRIM 3 TRIM BANK 3 BOOTH/SESSION OUT BANK 3 +9 – 13 HI FX ADJ. +12 -12 +9 – HI FX ADJ.
PART NAMES AND FUNCTIONS 5 CH-1 equalizer dials (HI/MID/LOW) 15 Monitor SELECT switch HI Use to adjust CH-1 input treble response (range of adjustment: 13 kHz, +6 dB to –26 dB). MID Use to adjust CH-1 input midrange response (range of adjustment: 1 kHz, +6 dB to –26 dB). LOW Use to adjust CH-1 input bass response (range of adjustment: 70 Hz, +6 dB to –26 dB). MASTER position selects MASTER output. (This setting allows output regardless of the setting of the MASTER LEVEL dial.
PART NAMES AND FUNCTIONS 22 CH-1 REVERSE indicator 32 CH-2 REVERSE indicator When lighted, indicates that the front panel’s FADER REVERSE switch has been set so that the CH-1 fader lever operates in the reverse direction (see front panel item 52). When lighted, indicates that the front panel’s FADER REVERSE switch has been set so that the CH-2 fader lever operates in the reverse direction (see front panel item 52).
PART NAMES AND FUNCTIONS Top Panel (2) 37 MIC PHONO 1 /LINE 1 CD 1 BANK 1 BANK 1 BANK 2 BANK 2 PHONO 2 CH-1 /LINE 2 CD 2 MASTER LEVEL MIC LEVEL TRIM TRIM 45 38 0 – BANK 3 BOOTH/SESSION OUT BANK 3 +9 – HI FX ADJ. +12 -12 +9 – HI FX ADJ.
PART NAMES AND FUNCTIONS 43 CH-1 effect switch and indicator (EFFECT LOCK ON/OFF/ON) 49 CH-2 effect mix ratio/depth adjust dial (MIX/DEPTH) To turn effects [ON], either pull switch forward (switch returns automatically to [OFF] when released) or slide to far side to the [LOCK ON] position. When effects are [ON], the indicator flashes and effects are applied to CH-1. Use to adjust the volume (amount) of effects applied to CH-2 (rotate clockwise to increase effects, counterclockwise to reduce).
PART NAMES AND FUNCTIONS Front Panel 52 53 FADER REVERSE CH-1 C.F. FADER START CH-2 C.F. 1 CH-1 ON ON ON OFF OFF OFF 54 PROFESSIONAL 2CHANNEL MIXER DJM-909 FADER CURVE CH-1 FOOT SW PHONES C.F.
PART NAMES AND FUNCTIONS Rear Panel 59 60 61 62 CONTRAST R CH-2 SEND R L 63 64 BRIGHT L RETURN R L R R MASTER 2 L (MONO) PHONO / LINE SIGNAL GND (MONO) MIC PHONO / LINE R CH-2 PLAYER CONTROL 73 72 71 R 2 HOT 70 L 66 PHONO 3 COLD 1 GND LINE BOOTH/ SESSION OUT L MASTER 1 PHONO 74 CH-1 CD CD 75 65 L CH-1 PLAYER CONTROL 69 SIGNAL GND LINE SESSION IN 68 67 59 CH-2 input jacks 67 CH-1 PHONO/LINE selector switch CD Connect to audio output from CH-2 CD playe
PART NAMES AND FUNCTIONS Touch Panel Display Contents B. Effect select display BANK 1 BANK 1 BANK 2 EDIT 1 CH FOOT TIME 2000 ms EDIT 2 CH PICH LOW MID HI LOW MID HI AUTO AUTO 120 BPM 0% BANK 2 120 BPM BANK 3 BANK 3 FX ADJ. FX ADJ. FADER CURVE FADER CURVE BANK EDIT Hold the FADER CURVE/BANK EDIT button depressed for about one second to change the screen to the main page effect select menu (settable independently for each channel).
PART NAMES AND FUNCTIONS Touch Panel Display Selection Changing between the touch panel’s four basic display patterns (A, B, C, D) is performed by pressing the operating buttons at the panel’s sides. Effect parameter adjust B Effect select display C display ECHO CH 1 BANK EDIT FADER CURVE Hold FADER CURVE/BANK EDIT button depressed. BANK EDIT CH1 AUTO 1 2 0 BPM TIME FOOT 2 0 0 0 ms Hold FADER CURVE/ BANK EDIT button Press FX ADJ. depressed. Effect type display button.
BPM COUNTING Automatic Mode BPM Counting This function automatically counts the track’s speed in BPM (Beats Per Minute), displaying the results as a numerical value. The functions does not merely count the bass beat, but uses a computer to calculate the track’s original BPM required by the DJ. The display provides a visual standard in addition to the human ear, thus allowing the DJ to quickly match two tracks possessing differing speeds.
FADER OPERATIONS Adjusting Fader Lever Operating Sensation BANK 1 NORMAL BANK 3 FX ADJ. Press FADER CURVE/BANK EDIT button. BANK 2 BANK 3 CF 1 NORMAL The supplied hexagonal Allen driver can be used to adjust the hexagonal Allen screw located next to the top panel’s cross fader slider opening, thus modifying the sliding resistance of the lever. Rotate the screw clockwise to increase sliding resistance and counterclockwise to reduce resistance.
FADER OPERATIONS Cross fader start play and back cue play When the CH-1 CD player is held in standby at the cue point, merely moving the cross fader lever from the right (CH-2) side to the left (CH-1) side will cause the CH-1 CD player to begin playback. When the cross fader lever reaches the left (CH-1) side, CH-2 CD player performs back cue (returns to its cue point).
EFFECT FUNCTIONS Types of Effects This unit is equipped with a beat effector linked to the BPM, and fader effector linked to the channel or cross fader, producing a total of 50 basic effects, but an even wider variety of effects can be produced by varying the parameters of each effect. Beat Effector (effects linked to BPM) Name Function FX ADJ. Parameter (touch panel) 1 DELAY (*1) In time with BPM, outputs repeat sound once. Set delay time of 1/8 to 8/1 of each beat of BPM.
EFFECT FUNCTIONS Name Function FX ADJ. Parameter (touch panel) 22 CHORUS1 Produces broadened musical effect resembling the production of same pitch sounds from multiple sources. Set period of chorus wavers based on beats calculated from BPM. 23 CHORUS2 Produces even broader musical effect than CHORUS1. Set period of chorus wavers based on beats calculated from BPM. 24 CHORUS3 Changes degree of waver in chorus sound.
EFFECT FUNCTIONS Fader Effector (effects linked to channel or cross fader) Name Function FX ADJ. Parameter (touch panel) 36 FADER ROLL (*2) EFFECT switch turn ON or fader position is used as trigger to record input sound, and then output the sound repeatedly within range of 1/1 to 1/16 beat. Select either channel fader or cross fader. Set base ROLL time to 1/2, 1/1, or 2/1. 37 FADER MULTI TAP DELAY (*1) At preset intervals repeat sound is output at 1/1 to 1/16 beat set with fader.
EFFECT FUNCTIONS Using the Effect Functions The basic procedures is as follows: [Select effect type] = [Set parameters (while monitoring through headphones] =[Set EFFECT switch to ON]. Below are examples of this basic operation procedure; other effects are produced in much the same way: [Example 1] Apply delay to CH-1 track: 1. Touch the touch panel’s CH-1 (left side) DELAY button (select effect type).
EFFECT FUNCTIONS Presetting Effects Of the effects displayed on the touch panel’s main page (effect type menu), three types can be set for each channel CH-1 and CH-2 in the BANK buttons (1/2/3). The preset effects can then be called up at a single touch. BANK 1 BANK 1 BANK 2 1. Select the channel (CH-1/CH-2) whose preset value you wish to change.
EFFECT FUNCTIONS Effect Parameters The 50 built-in effects can be modified by parameters for time and amount to produce a wider variety of effects. Operate the TIME/ SELECT dial to adjust time parameters (parameter 1), and use the MIX/DEPTH dial to adjust amount parameters (parameter 2). Also with fader effects, the position of the fader lever can be used to produce changes resulting in an even wider range of effects. 7 Beat effects Parameter 1 (TIME/SELECT dial) No.
EFFECT FUNCTIONS Parameter 1 (TIME/SELECT dial) No. Name Explanation Parameter 2 (MIX/DEPTH dial) Explanation Setting range (unit) 27 PHASER1 Set period of phase effect frequency shift. 10 – 32000 (msec) Rotate to right for stronger effect. 28 PHASER2 Set period of phase effect frequency shift. 10 – 32000 (msec) Rotate to right for stronger effect. 29 TOUCH PHASER1 Set sensitivity corresponding to input volume. 1 – 100 (%) Rotate to right for stronger effect.
EFFECT FUNCTIONS Parameter 1 (TIME/SELECT dial) Name No. Explanation Setting range (unit) Parameter 2 (MIX/DEPTH dial) Fader lever Explanation Explanation 46 FADER FLANGER — — Rotate to right for increased effect. Changes frequency band subject to flange effect. 47 FADER PHASER — — Rotate to right for increased effect. Changes frequency band subject to phase effect.
TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below. Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use. If the trouble cannot be rectified even after checking the following items, contact your dealer or nearest PIONEER service center. Problem Possible Cause Countermeasure The power does not turn on.
SPECIFICATIONS Audio Section Input terminal (input level/impedance) CD 1, 2 ....................................... –14 dBV (200 mV) / 22 kΩ LINE 1, 2 .................................... –14 dBV (200 mV) / 22 kΩ PHONO 1, 2 .................................. –54 dBV (2 mV) / 47 kΩ MIC .................................................. –54 dBV (2 mV) / 3 kΩ SESSION IN ............................... –14 dBV (200 mV) / 22 kΩ RETURN ....................................