RDS AV RECEIVER English DMH-WT8600NEX DMH-WT7600NEX DMH-WT86NEX DMH-WT76NEX DMH-WC6600NEX DMH-WC5700NEX DMH-W4660NEX DMH-W4600NEX ® Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Contents Important The screen shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Precaution ................................................................................... 4 ■ Parts and controls..................................................................... 11 ■ Basic operation ......................................................................... 14 ■ Bluetooth®.................................................
■ External component ................................................................. 95 ■ iDatalink .................................................................................... 96 ■ Metra Axxess ........................................................................... 101 ■ Settings.................................................................................... 104 ■ Favorite menu ......................................................................... 122 ■ Other functions................
Precaution Information to user –This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. –Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. –NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as papers, floor mat, cloths).
Before using this product, be sure to read and fully understand the following safety information: • Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations.
the factory receiver, do not use the Pioneer receiver unless it is connected to and displays the same view as the factory backup camera. Connection to the factory backup camera will require an adaptor, sold separately. Not all vehicles may be able to connect. Please check with a qualified professional installer for installation options specific to your vehicle.
WARNING • SCREEN IMAGE MAY APPEAR REVERSED. • USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION Handling the USB connector CAUTION • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred.
1 2 3 Receive updates on the latest products and technologies. Download owner’s manuals, order product catalogs, research new products, and much more. Receive notices of software upgrades and software updates. Protecting the LCD panel and screen • Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.
This indicates to touch and hold the appropriate soft key on the touch screen. This indicates to swipe in the direction of the arrow on the touch screen. This indicates to drag in the direction of the arrow on the touch screen.
Parts and controls Main unit 7600NEX 86NEX 4660NEX 4600NEX 5700NEX 76NEX 6600NEX Touch to display the home menu screen. Touch and hold to power off. To power back on, touch any button. / NOTE When the home menu screen is displayed, touch to display the previously used AV source screen. Touch to activate the voice recognition mode such as Siri when the iPhone is connected to the unit via Bluetooth or USB. Touch and hold to display mobile device search or select screen.
Remote control 8600NEX 7600NEX 6600NEX 4660NEX 5700NEX English / VOLUME MODE SRC/OFF TOP MENU MENU ENTER MUTE AUDIO SUBTITLE ANGLE BAND/ESC RETURN or or or FOLDER/P.CH or Volume Press to switch between the Application screen and the AV operation screen. Press and hold to turn off the display. Press to cycle through all the available sources. Press and hold to turn the source off. Not used. Not used. Not used. Not used. Press to select the tuner band when tuner is selected as a source.
4600NEX 86NEX 76NEX The remote control is sold separately.
Basic operation Preparing the remote control 5700NEX How to replace the battery Insert the CR2025 (3 V) battery with the plus (+) and minus (-) poles orientated properly. WARNING Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like. CAUTION • Remove the battery if the remote control is not used for a month or longer. • There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
NOTE The remote control may not function properly in direct sunlight. Important • Do not store the remote control in high temperatures or direct sunlight. • Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas pedal. English Starting up the unit 1 2 3 4 Start the engine to boot up the system. The [Select Program Language] screen appears. NOTE From the second time on, the screen shown will differ depending on the previous conditions. Select the language.
1 Restore the default setting (page 124). Using the touch panel You can operate this product by touching the keys on the screen directly with your fingers. Common touch panel keys : Returns to the previous screen. : Close the screen. Operating list screens Songs Rad abcdefghi Play abcdefghi Artis abcdefghi Albu abcdefghi Son abcdefghi ・・・ A : I : R : Z # Touching an item on the list allows you to narrow down the options and proceed to the next operation.
Operating the time bar Operating the on-screen keyboard Displays the characters that are entered. Enters the characters in the text box. Confirms the entry and proceeds to the next step. Deletes the input text to the left of the cursor one letter at a time. Enters a space. Switches between alphabet and numbers/symbols. Switches between capital and lower case letters. - 17 - English You can change the playback point by dragging the key.
Home menu screen English Widget (page 23) Touch to see the selected source/application. Customizing the widget (page 23) When you finish customizing, touch . Favorite source/application area Touch to see the selected source/application. Customizing the home menu screen (page 19) The following items can be customized.
Customizing the home menu screen ▶Changing the home menu screen layout 1 2 3 Touch and hold the favorite source/application area. Touch . Select [Lower Dock Area] or [Upper Dock Area]. ▶Rearranging the icons in the favorite source/application area 1 2 Touch and hold the favorite source/application area. Drag the icon to the desired position. When you finish rearranging, touch .
Favorite radio stations screen English Favorite radio stations Touch to make changes to the selected radio station. List of favorite radio stations Touch to select the favorite radio station from the list screen (page 20). Updates the favorite radio stations. The next 3 stations on the favorites list are displayed. NOTE This function is only available when there are more than 4 favorite radio stations on the list. List screen Adds/removes a favorite.
Suggested radio stations This unit suggests radio stations to you according to your frequently listened music and radio stations. Important Displaying the suggested radio stations screen 1 Touch then swipe down on the screen. Swipe up on the screen when you finish. Suggested radio stations screen Suggested radio stations Touch to tune in to the selected radio station. List of suggested radio stations Touch to select the suggested radio station from the list screen (page 22).
List screen English Available radio stations Touch to tune in to the selected radio station. Notification Notification displays the notifications from the connected iPhone or smartphone (Android™) and sports information registered on CarAVAssist. NOTES • This function needs to be connected via Bluetooth to an iPhone or a smartphone with CarAVAssist installed (page 43). For details on Bluetooth connection, refer to Bluetooth connection (page 25).
Notification screen English Received notifications Touch to display the details of the notification. Widget Widgets enable you to see your favorite sources and application information on the home menu screen and access shortcuts to them. Customizing the widget NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. 1 2 3 Touch . Touch and hold the widgets area. Touch the widget that you want to customize. When you finish customizing, touch .
Widget area To rearrange the widgets, drag them to the desired locations. To remove a widget, drag the widget to . Available source/application lists for the widgets Flick left/right to switch between widget lists. TIP You can fit up to four widgets in the widgets area by adjusting their size. NOTE The size can only be adjusted for widgets that display an adjustment key. ▶Switching the widgets 1 2 3 4 Touch . Touch and hold the widgets area.
Bluetooth® Bluetooth connection 6 Turn on the Bluetooth function on the device. Touch then swipe left on the screen. Touch then . Touch [Connection]. Touch . The unit starts to search for available devices, then displays them in the device list. Touch in the list. TIP If you touch the device name, the Wi-Fi connection for Apple CarPlay or Android Auto is established. NOTES • If five devices are already paired, a message prompting you to delete a paired device is displayed.
CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Description [Auto Connect] [On] [Off] Select [On] to connect the last connected Bluetooth device automatically when using the hands-free phone function. NOTE If two Bluetooth devices were connected the last time, the two devices are connected to this product automatically in the order that they are registered in the device list.
Hands-free phoning To use this function, you need to connect your cellular phone to this product via Bluetooth in advance (page 25). CAUTION Making a phone call 1 2 3 Touch then swipe left on the screen. Touch [Phone]. The phone menu screen appears. Touch one of the call icons on the phone menu screen. - 27 - English For your safety, avoid talking on the phone as much as possible while driving.
The following items are displayed. • Name of the current cellular phone • List number of the current cellular phone • Reception status of the current cellular phone • Battery status of the current cellular phone English TIP If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key.
Using the preset dial lists ▶Registering a phone number You can easily store up to six phone numbers per device as presets. 1 Touch then swipe left on the screen. 4 Touch [Phone]. Touch or . On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch . ▶Dialing from the preset dial list 1 2 3 4 Touch then swipe left on the screen. Touch [Phone]. Touch . Touch the desired entry on the list to make a call. The dial screen appears and dialing starts.
NOTE When two phones are connected at the same time, if an incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed. Voice recognition function (for iPhone) NOTE When an iPhone is used, Siri Eyes Free Mode is available with this product. 1 2 3 Touch then swipe left on the screen. Touch [Phone]. Touch . The voice recognition function launches and the voice control screen appears.
Setting the private mode During a conversation, you can switch to private mode (talk directly on your cellular phone). 1 Touch or to turn private mode on or off. Adjusting the other party’s listening volume This product can be adjusted to the other party’s listening volume. 1 Touch to switch between the three volume levels. Notes for hands-free phoning ▶General notes • Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.
• The registered name will appear if the phone number is already registered in the phone book. When multiple names are registered for the same phone number, the names are displayed in the same order as in the phone book. ▶The received call and dialed number histories ▶Phone book transfers • If there are more than 1 000 phone book entries on your cellular phone, not all entries may download completely. • Depending on the phone, this product may not display the phone book correctly.
6 Touch [Bluetooth Audio]. The Bluetooth audio playback screen appears. Basic operation English Bluetooth audio playback screen Track number indicator Switches between playback and pause. Skips files forward or backward. Sets a repeat play range. Switches between random and normal file playback order. Selects a file or folder from the list to playback. NOTE This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher.
Wi-Fi® By connecting this unit to a Wi-Fi network, you can browse the Internet and use Apple CarPlay or Android Auto via the wireless connection. English Wi-Fi connection 1 2 3 4 5 6 7 8 9 Turn on the Wi-Fi function on the device. Touch then swipe left on the screen. Touch then . Touch [Wi-Fi Settings: Hotspot]. Set [Wi-Fi] to [On]. Touch [Hotspot setting]. Touch . The available Wi-Fi networks appear on the list. Touch one of the listed Wi-Fi networks on the list.
Access point setting screen English Available network SSIDs Touch to connect selected network. Automatic connection status Touch to switch between the network automatically or manually. Network connection priority Drag the network upward to prioritize the connection by touching Searches for existing networks. Touch to go to Adding access point screen (page 35). Deletes the networks.
Connects Wi-Fi network. Touch to select desired network then enter the password if required. TIP If you want to connect to a network that is not listed on the screen, touch [Other (Add network)] and enter the required information. Searches again for existing networks. English WPS Wi-Fi connection You can connect easily to a Wi-Fi network, if WPS (Wi-Fi Protected Setup™) is available on the connected device. ▶WPS connection with the push button 1 2 3 4 5 Touch then swipe left on the screen.
NOTE This setting is available only when you stop your vehicle in a safe place and apply the parking brake. The menu items vary according to the source/application. Description [Wi-Fi] [On] [Off] Switch Wi-Fi connection on or off. [Hotspot setting] Set up the Wi-Fi access point (page 34). [Easy setup] Set up the Wi-Fi connection via WPS access (page 36). [MAC Address] Displays the MAC address. [IP Address] Displays the IP address.
– NOTE: This function uses data from the mobile device that you connect to this unit. Data usage will depend on the functions used on this unit. Starting procedure 1 2 3 4 Turn on the Wi-Fi function on your iPhone or smartphone. Connect your iPhone or smartphone with CarAVAssist installed on it to this product via Bluetooth (page 25). A connection confirmation message appears on the screen. Touch [Yes] on the pop-up message. Transfer mode screen is displayed.
2 Touch [Apple CarPlay] or [Android Auto] instead of [Wi-Fi Audio]. The Wi-Fi audio playback screen appears. NOTES • [Wi-Fi Audio] is displayed as [Android Auto] when the Android Auto is in use. • [Wi-Fi Audio] is displayed as [Apple CarPlay] when the Apple CarPlay is in use. English Basic operation Wi-Fi audio screen (Example: Apple CarPlay) 6/10 Apple CarPlay Sun 12:48 Abcdefghijk Abcdefghi Abcdef 9999/9999 9999’99” Wi-Fi audio with Apple CarPlay operation is same as the iPod source function.
Browser The browser enables you to browse registered websites using CarAVAssist. Using the browser Important • To use the browser function, you may need to connect this unit to the Internet via a Wi-Fi network. • To use the browser function, you need to register webpage URLs as your favorite webpages on CarAVAssist, then import them to this unit in advance (page 44). • To use the browser function, you need to accept the Internet Communication Service the Terms of Use and Privacy Policy (page 113).
Web browser screen English Available website thumbnails Touch to go to the selected website. TIP Swipe left/right to switch between registered webpage list. Website screen Browser toolbar To display the toolbar, swipe down from the top of the screen. Returns to the web browser screen. Displays the previous page. Displays the next page. Refreshes the page.
NOTE When using the browser while Apple CarPlay or Android Auto is in operation, the browser is displayed on the connected rear monitor only when the browser is displayed on the main monitor. Otherwise, a black screen is displayed on the connected rear monitor.
CarAVAssist Before you start WARNING Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application. For iPhone users This function is compatible with iOS 12.0 or later. You can download CarAVAssist on the App Store. For smartphone (Android) users This function is compatible with devices that have Android OS 6.0 or later installed.
• Registering your favorite teams to receive information about them on the sports application of the unit • Organizing notifications on your smartphone (Android) for displaying on the unit • Downloading the latest firmware For details, refer to “Help” in the CarAVAssist application. 1 2 3 4 5 Connect your iPhone or smartphone with CarAVAssist installed on it to this product via Bluetooth (page 25). Touch then swipe left on the screen. Touch .
Follow the on-screen instructions to finish updating the firmware. NOTES • This product will reset automatically after the firmware update is completed if the update is successful. • If an error message appears on the screen, touch the display and perform the above steps again.
Source/application Supported source and application The following sources or applications can be played back or used by connecting an auxiliary device.
Source list Touch to see the selected source. Connected Wi-Fi network Touch to go to the Wi-Fi settings (page 36). Connected mobile device Touch to go to the preset list screen in the hands-free phone when a device is connected with this unit via Bluetooth. Touch to start searching or go to the device select screen, when the device is not connected. NOTE When Apple CarPlay or Android Auto is activated, the device select screen appears even if a device is connected with this unit.
Displays the source/application list. Settings (page 104) and Favorite menu (page 122) Selects or customizes the equalizer curve (page 117). Selecting a source/an application NOTE [Source OFF] is only available for AV sources. Source/application selection screen 1 2 Touch then swipe left on the screen. Touch the source/application icon. When you select [Source OFF], the AV source is turned off. Source/application list 1 2 Touch when the AV source is in use. Touch the source/application key.
HD Radio™ Technology/ Radio 7600NEX 86NEX 76NEX 6600NEX 4660NEX 5700NEX Radio 4600NEX About HD Radio stations HD Radio stations offer high quality audio and data services. HD Radio stations are brought to you by your local FM or AM stations.
Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD. English Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. Adjacent to traditional main stations are extra local FM channels.
Basic operation HD Radio, Radio screen English * HD Radio indicator and signal type indicator Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects the FM1, FM2, FM3 or AM band. Performs BSM (best stations memory) function (page 52). Displays area radio stations list (page 52).
* DMH-WT8600NEX, DMH-WT7600NEX, DMH-WT86NEX, DMH-WT76NEX, DMH-WC6600NEX, DMHW4660NEX, DMH-WC5700NEX Storing the strongest broadcast frequencies (BSM) NOTES • Storing broadcast frequencies with BSM may replace those you have already saved. • Previously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit. 1 Touch and hold to begin search.
Area radio stations list screen English Available radio stations Touch to tune in to the selected radio station. Radio settings 1 2 3 4 Touch then swipe left on the screen. Touch then . The system setting screen appears. Touch [AV Source Settings]. Touch [Radio settings]. The menu items vary according to the source. Menu Item Description [Blending]* [On] [Off] Switches to the analog broadcast of the same frequency level automatically when reception of a digital broadcast becomes weak.
Menu Item Description [Local] Local seek tuning allows you to only tune into [Off] radio stations with sufficiently strong signals. FM: [Level1] [Level2] [Level3] [Level4] NOTES AM: [Level1] [Level2] * DMH-WT8600NEX, DMH-WT7600NEX, DMH-WT86NEX, DMH-WT76NEX, DMH-WC6600NEX, DMHW4660NEX, DMH-WC5700NEX - 54 - English • [Level4] for FM and [Level2] for AM are available only with the stations with the strongest signals. • This setting is available only when [HD Radio] is selected as the source.
USB Plugging/unplugging a USB storage device Plugging a USB storage device 1 Plug a USB Type-C® storage device into the USB Type-C cable. TIP When you use a USB Type-A storage device, use a USB Type-C to USB Type-A adaptor (supplied) for plugging. • • • • NOTES This product may not achieve optimum performance with some USB storage devices. Connection via a USB hub is not possible. A USB Type-C cable is required for connection.
Starting procedure Touch then swipe left on the screen. Plug the USB Type-C storage device into the USB Type-C cable (page 55). Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. Basic operation TIP You can set the screen size for the video and image files (page 123). Audio source Audio source screen 1 Displays the link search screen.
Sets a repeat play range for all files/the current folder/the current file. Switches between random and normal file playback order. Displays the hidden function bar. Switches the following media file types. [Music]: Audio files [Video]: Video files [Photo]: Image files Selects a file from the list. Touch a file on the list to playback. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it.
Constructs the database for using the Music Browse mode (page 58). Switches the current music information display. You can select files to play back using the category list if the files contain tag information. NOTES • This function is available for the USB storage device only. • Music Browse mode cannot be held once the power is turned off. 1 2 3 4 5 Touch to create a database. Music Browse mode will be available after the database has been created. Touch .
Video source screen English Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Performs fast reverse or fast forward. Touch again to change the playback speed. Stops playback. Touch again to start from the beginning next time. Performs frame-by-frame playback. Performs slow-motion playback. Sets a repeat play range for all files/the current folder/the current file. Switches the audio language.
Skips files forward or backward. Still image source English TIP Image files are not displayed in the rear display. Still image screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Skips files forward or backward. Selects the previous folder or the next folder. Saves the current images as the wallpaper. Touch the following items to overwrite the image. [As AVScreen]: Saves the image as the wallpaper for the AV screen.
Sets a repeat play range for all files/the current folder. Plays all files in the current repeat play range or does not play them in random order. Selects a file from the list. Touch a file on the list to playback. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it. - 61 - English Switches the following media file types.
iPhone NOTE iPhone may be referred to as iPod in this manual. When connecting an iPhone to this product, the settings are automatically configured according to the device to be connected. For details of the compatibility, refer to Compatible iPhone models (page 137). 1 2 3 Connect your iPhone. • iPhone via USB or Bluetooth Touch then swipe left on the screen. Touch [iPod]. NOTES • For USB connection, refer to the Installation Manual. • For Bluetooth connection, see page 25.
Displays the link search screen. Select a song from the list related to the song currently playing. TIP If you touch the artwork, the list of songs in the album is displayed. Switches between playback and pause. Skips files forward or backward. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly. Switches among connected devices. Selects a song from the list.
iPhone application screen English Switches between playback and pause. Skips files forward or backward. Apple Music Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: https://www.apple.com/music/ Apple Music Radio screen Switches between playback and pause.
Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. • Touch [Add to iTunes Wish List] to add the current song to the iTunes wish list. NOTE This function may not be used depending on your Apple Music account status. English Skips tracks forward.
Apple CarPlay You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTES • The compatible finger gestures vary depending on the application for the iPhone. • To use the Apple CarPlay function, first turn off the Amazon Alexa or CarAVAssist function. WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.
2 3 4 Touch then . The communication setting screen appears. Touch [Driving Position]. English Select the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Wired connection 1 2 Connect an Apple CarPlay compatible device to this unit via USB. Touch the Apple CarPlay icon. The Apple CarPlay home screen appears.
TIP If the device that you want to connect does not appear, touch on the screen again. You can also start Apple CarPlay with the desired device by opening the Bluetooth or Apple CarPlay setting menu while displaying the device search or device list screen. TIP You can use Siri function by touching button once Apple CarPlay is activated. Adjusting the volume You can adjust the guidance volume separately from the main sound volume when Apple CarPlay is used.
Using the split screen 8600NEX 7600NEX 86NEX 76NEX 6600NEX 1 Touch TIP Touch to switch to the split screen view. if you want to return to the full screen. TIP The screen positions of the Apple CarPlay and of the unit depend on the [Driving Position] setting (page 66). Displays the source list. Touch to see the selected source. Displays the control panel corresponding to the selected source. NOTE The control panel is not displayed according to the source. Displays the selected source information.
Android Auto™ You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. For wireless connections To wirelessly use Android Auto on your car display, you need a compatible Android smartphone with an active data plan. You can check which smartphones are compatible at g.co/androidauto/requirements. NOTES • [USB MTP] is set to [Off] to use Android Auto (page 105).
Setting the driving position To achieve optimum usability of Android Auto, set the driving position setting correctly according to the vehicle. The setting will be applied the next time an Android Auto compatible device is connected to this product. 3 4 Touch then swipe left on the screen. English 1 2 Touch then . The communication setting screen appears. Touch [Driving Position]. Select the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle.
NOTE The unit cannot detect the device unless the Bluetooth setting menu is displayed on the smartphone screen. 4 Touch the desired device on the screen. The unit configures the connection then starts the application. TIP You can use voice recognition function by touching on the screen again. button once Android Auto is activated. NOTES • For details on USB connection, refer to the Installation Manual.
Setting the auto-launch function If this function is set to on, the Android Auto screen is displayed automatically when an Android Auto compatible device is connected to this unit. 1 2 3 Touch then swipe left on the screen. Touch then . Touch [Android Auto Auto-launch] to switch [On] or [Off]. - 73 - English NOTE The Android Auto screen is displayed automatically only when an Android Auto compatible device is correctly connected to this product.
Sports Check team information such as the game scores and game information of your favorite teams registered on CarAVAssist. English Using sports The unit displays three days of sports information, for the previous, current, and next day. Important • To use the sports function, you need to connect this unit to the Internet via a Wi-Fi network. • To use the sports function, you need to register a team in CarAVAssist and import it to this unit (page 44) in advance.
Weather Display the current temperature and daily or hourly forecast in your current location. The weather function uses a location service to determine your current location. English Using weather Important • To use the weather function, you need to connect this unit to the Internet via a Wi-Fi network. • To use the weather function, you need to accept the Internet Communication Service the Terms of Use and Privacy Policy (page 113).
NOTE If a data item is unknown or missing, “-” is displayed.
Amazon Alexa TIP You can also use the Alexa Calling, Drop In, Message or Announcement function through this unit. NOTE The incoming call of the Drop In is not supported. Important • To use the Amazon Alexa function, you need to connect this unit to the Internet via a Wi-Fi network. • This function is available in the following languages* and countries: * All of the languages supported by Amazon Alexa are currently not available, but will be available soon.
How to use Amazon Alexa Before using the Amazon Alexa function, it is necessary to authorize the unit. 5 6 7 8 Touch then swipe left on the screen. Touch then . English 1 2 3 4 Touch [Amazon Alexa setting]. Touch [Setup]. The introduction screen appears. Touch [Get started]. Use your mobile device to go to the displayed URL or scan the displayed code. Enter your Amazon account Email address and password. Enter the authorization code that is shown in step 6.
TIP You can operate the Amazon Alexa function by touching the activated. button once Amazon Alexa is Voice operation Talk to Amazon Alexa to perform the desired operation by using “Alexa” as the wake word. NOTE Wake words other than “Alexa”, such as “Echo”, “Amazon”, or “Computer”, are not supported. Entertainment You can play content through Amazon Music, Kindle books text-to-speech, Audible or any compatible third party content service by talking to Amazon Alexa.
Alexa screen 1 (Example: Amazon Music) English Switches between playback and pause. Skips songs forward or backward. Switches the repeat function ON/OFF. Switches between random and normal song playback order. Alexa screen 2 (Example: Amazon Music) Gives a Like to the currently playing song. Gives a Dislike to the currently playing song.
Phone call control Alexa allows you to use voice commands to place or answer calls using a mobile device paired to this unit. Important Before using phone call control Before using this function, connect your mobile device to this unit via Bluetooth. 1 Touch then swipe left on the screen. 2 3 4 5 Touch then . Touch [Amazon Alexa setting] then [Main Menu]. Touch [Settings] then [Contact list]. Select the desired mobile device.
Deletes the mobile device. Starting procedure 1 2 3 Touch then swipe left on the screen. Touch [Alexa]. Talk to Amazon Alexa to perform the desired hands-free phone operation. ▶Voice operation 1 Talk to Amazon Alexa to perform the desired hands-free phone operation by using “Alexa” as the wake word. For example, say “Alexa, call home” or “Alexa, answer the call”. Amazon Alexa settings 1 2 3 Touch then swipe left on the screen. Touch then . Touch [Amazon Alexa setting].
[Settings] [Contact list] Displays the list of mobile devices that are connected to Amazon Alexa then switches whether or not to upload the contacts from the selected mobile device (page 81). [Hands-free listening] Switches whether or not to use the wake word (“Alexa”). [Notifications] Switches whether or not notifications of received messages are displayed. [Share location] Switches whether or not Amazon Alexa has access to location information.
SiriusXM® Satellite Radio Subscribing to the SiriusXM Satellite Radio service 1 2 3 4 Touch then swipe left on the screen. Touch [SiriusXM]. You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly. Switch to Channel 0 and check the Radio ID. The SiriusXM Radio ID can be found by tuning in to Channel 0. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging.
Listening to SiriusXM 1 2 Touch then swipe left on the screen. Touch [SiriusXM]. TIPS • On the Featured Favorites Band, the current broadcast frequency cannot be stored to a key (page 89). • If fewer than two music channels are stored as presets, you cannot use the TuneMix function. • [RADIO ID] is displayed when Channel 0 is selected. Current channel display (Live broadcast mode) Selects a channel directly. Recalls the preset channel stored to a key from the memory.
tune mix Switches TuneMix™ to on or off. You can use TuneMix™ from each of the music channels stored as presets on the current band. tune scan Performs TuneScan™ (page 87). Performs channel number up/down. Performs fast channel number up/down. NOTE The operation stops if the icon is touched and held for more than 30 seconds. To resume the operation, touch and hold the icon again. Switches to the channel broadcasting the traffic and weather information for the selected city (Traffic & Weather Now™).
Selects a channel from the list. Select the category name or the list of all channels then touch the desired channel. To switch the display list, touch . Scan NOTES • The types of categories available depend on the types of channels available. • It may take time to display the channel list depending on the SiriusXM reception condition. Replay™ Mode (Time bar display) Switches between playback and pause. Performs content forward or backward. Performs fast forward or rewind.
NOTES • When fewer than two music channels are stored as presets, you cannot use TuneScan™. • TuneScan™ may take a few minutes to become available after the product is turned on or the preset band is changed. 1 Touch tune scan to display the following display. English Continues playing the current scanning song or channel. Skips to the previous/next song during TuneScan™ or to the previous/next channel during category scan. Cancels scan play and returns to the previous channel.
Using Featured Favorites Band How to access When there is a Featured Favorite, access it with the band key. 1 Touch the band key. SXM1—SXM2—SXM3—FF When there are multiple Featured Favorites, access them from the category list. It is displayed at the bottom of the category list (page 87). Parental lock The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content.
Description [Parental Control] Enter the current passcode then touch to set this function (the default passcode is 0000). • To edit the passcode, touch [Edit Code] then touch followed by entering the new passcode. • To lock the channel, touch the appropriate channel. appears and the channel is locked. TIPS • When you touch the locked channel, the channel is unlocked. • When you touch [Clear All], all locked channels are unlocked.
Menu Item Description [SiriusXM Reset] Set to restore to the default SiriusXM settings by touching [Restore]. CAUTION Do not turn off the engine while restoring the settings. - 91 - English NOTE The source is turned off before the process starts.
HDMI™ CAUTION NOTE A micro HDMI cable (sold separately) is required for connection. For details, refer to the Installation Manual. Starting procedure 1 2 3 Connect an HDMI device to this unit via a micro HDMI cable (sold separately) then turn on the device. Touch then swipe left on the screen. Touch [HDMI]. The HDMI source screen appears. Basic operation HDMI source screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen.
AUX You can display the video image output by the device connected to video input. NOTE A Mini-jack AV cable (sold separately) is required for connection. For details, refer to the Installation Manual. Starting procedure 1 2 3 4 5 6 Touch then swipe left on the screen. Touch then . Touch [Input/Output settings]. Confirm that [AUX Input] is turned on. Touch then swipe left on the screen. Touch [AUX]. The AUX screen appears.
Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 123). Switches between the video input and audio input.
External component Camera view * The 2nd camera input is available only for DMH-WT8600NEX/DMH-WT7600NEX/DMH-WT86NEX/ DMH-WT76NEX/DMH-WC6600NEX/DMH-W4660NEX/DMH-WC5700NEX. Starting procedure 1 2 Touch then swipe left on the screen. Touch [Camera View]. Video footage is displayed on the screen. Displaying 2nd camera view 1 2 3 4 5 6 7 8 Touch then swipe left on the screen. Touch then . Touch [Input/Output settings]. Touch [AV Input]. Touch [2nd Camera]. Touch then swipe left on the screen.
iDatalink Using iDatalink NOTE Since the type of module varies depending on the vehicle model, search for your vehicle via the following URL to determine which features are available for each module. Remember to select the correct radio model for accurate results. http://maestro.idatalink.com/support Important • For details about vehicle models that are compatible with the iDatalink adaptor, refer to the information on our website.
3 4 NOTE When the serial number input is required, input the device number of this product. Install the vehicle/head unit-specific firmware on your iDatalink Maestro module. NOTES • For details on installing the firmware, refer to iDatalink Maestro website. • For details on connecting this product to iDatalink Maestro, refer to the Installation Manual. • You can also check the device number on the [Firmware Information] screen of this product (page 110).
Using the functions on [Car Features] You can check and use the following screens after selecting [Car Features] in the starting procedure. Touch one of the icons on the left side of the screen to change a feature. Displays the Gauge screen. Displays the Climate screen. Displays the Parking Assist screen. Displays the Speed Radar Detector screen. Displays rear monitor mirroring when the rear monitor is connected via iDatalink. Gauges screen - 98 - English Displays the Vehicle Information screen.
Vehicle Information screen English Climate screen Parking Assist screen - 99 -
Speed Radar Detector screen English Displaying obstacle detection information CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgement, and care while parking your vehicle. NOTE This function is only available for vehicles equipped with a parking sensor system. iDatalink settings 1 2 3 Touch then swipe left on the screen. Touch then . Touch [OEM Settings] or [OEM Volume Settings].
Metra Axxess Using Metra NOTE Since the type of module varies depending on the vehicle model, search for your vehicle via the following URL to determine which features are available for each module. http://metraonline.com/ Important • For details about vehicle models that are compatible with the Metra interface conversion unit, refer to the information on Metra website. • After installing the Metra interface conversion unit, be sure to check that it operates properly.
Displays the Vehicle Information screen. Displays the Climate screen. Displays the Radio ID screen.
Radio ID screen English - 103 -
Settings You can adjust various settings in the main menu. 1 2 3 Touch then swipe left on the screen. Touch . Touch one of the following categories, then select the options. System settings (page 104) Theme settings (page 113) Audio settings (page 115) Video settings (page 119) Communication settings (page 120) System settings The menu items vary according to the source.
[Input/Output settings] Description [USB MTP] [Off] [On] Select [On] to use the USB MTP (Media Transfer Protocol) connection. Select [Off] to use Android Auto. [AV Input] [2nd Camera]* [Maestro] [Off] Select AV input source. [AUX Input] [On] [Off] Set to [On] for AUX source (page 93). * DMH-WT8600NEX, DMH-WT7600NEX, DMH-WT86NEX, DMH-WT76NEX, DMH-WC6600NEX, DMHW4660NEX, DMH-WC5700NEX [Camera settings] A separately sold rear view camera (e.g.
CAUTION Menu Item Description [Back-up Camera Input] [Off] [On] Setting rear view camera activation. [Camera Polarity] Setting the polarity of the rear view camera. [Battery] The polarity of the connected lead is positive. [Ground] The polarity of the connected lead is negative. NOTE This function is available when [Back-up Camera Input] is set to [On]. - 106 - English Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed.
Menu Item Description [Parking Assist Guide Adjust] Adjusting the guidelines by dragging or touching / / / on the screen. Touch [Default] to reset the settings. / / CAUTION NOTES • Use painter's tape or similar tape to place markings as shown below before setting up the guidelines. • Adjust the guidelines so that they overlay the tape markings as closely as possible. 30 cm (1 ft) 25 cm (9-7/8 in.) Markings Markings 1.52 m (5 ft) 25 cm (9-7/8 in.) 6.
[System Language] Menu Item Description [System Language] Select the system language. [Restore Settings] Menu Item Description [Restore Settings] Touch [Restore] to restore the settings to the default settings. CAUTION Do not turn off the engine while restoring the settings. NOTES • This setting is available only when you stop your vehicle in a safe place and apply the parking brake. • The source is turned off and the Bluetooth connection is disconnected before the process starts.
[Dimmer Settings] NOTE This setting is available only when you stop your vehicle in a safe place and apply the parking brake. Menu Item Description Setting the dimmer brightness. [Auto] Switches the dimmer to on or off automatically according to your vehicle’s headlight turning on or off. [Manual] Switches the dimmer to on or off manually. [Time] [Day/Night] [Day] [Night] [Dimmer Duration] Switches the dimmer to on or off at the time you adjusted. Setting the dimmer duration by day or night.
To adjust following menu, touch , , , to adjust. Description [Brightness] [-24] to [+24] Adjust the black intensity. [Contrast] [-24] to [+24] Adjust the contrast. [Color]* [-24] to [+24] Adjust the color saturation. [Hue]* [-24] to [+24] Adjust the tone of color (which color is emphasized, red, or green). [Dimmer] [+1] to [+48] Adjust the brightness of the display. [Temperature] [-3] to [+3] Adjust the color temperature, resulting in a better white balance.
Menu Item Description [Firmware Update] Update to the latest version of the firmware by using a USB storage device or wireless connection. To update the firmware via wireless connection, CarAVAssist is required. For details on performing the wireless update, refer to Updating the firmware wirelessly (page 44). 1 Download the firmware update files into your computer.
Description [3D Calibration Status] Check the sensor learning status, such as the degree of learning. You can also check the current sensor values and the total number of speed pulses. To delete the learned results stored in the sensor, follow the below instructions. 1 Touch [Distance] or [Speed Pulse], and then touch [Yes]. 2 Touch [Learning status] and then touch [Reset All]. TIP Touch [Reset All] to reset the sensor after changing the installation position or angle.
[OEM Settings] Menu Item Description [OEM Settings] (page 100). Menu Item Description [OEM Volume Settings] (page 100). [Amazon Alexa setting] Setting the Amazon Alexa (page 82). [Terms of Use / Privacy] Menu Item Description [Terms of Use / Privacy] Select to accept or withdraw from the Internet Communication Service the Terms of Use and Privacy Policy.
Menu Item Description [Background] Select the wall paper from the preset items in this product or original pictures via the external device. The wall paper can be set from selections for the home menu screen and AV operation screen. NOTE The [Background] settings are saved for each cellular phone connected via Bluetooth. The settings change depending on the cellular phone that is connected to this unit.
Menu Item Description [Home Custom Setting] Customize the home menu screen of the following items. • Switch the favorite source/application area • Customize the displayed favorite source/application • Rearrange the displayed favorite source/application Audio settings The menu items vary according to the source. Some of the menu items become unavailable when the volume is set to mute. Menu Item Description [Fader/Balance] Touch or to adjust the front/rear speaker balance.
Description [Master Sound Reviver] [Off] [Mode1] [Mode2] Enhances and complements compressed audio and restores it to High-Resolution Audio quality. [Mode1]: Suitable for compressed audio at bitrates higher than 256 kbps. [Mode2]: Suitable for compressed audio at bitrates lower than 256 kbps. [Speaker Level] Listening Position*1*2 [Off] [Front Left] [Front Right] [Front] [All] Adjust the speaker output level of the listening position.
Description [Time Alignment] [On] [Off] Listening Position*1*2 [Off] [Front Left] [Front Right] [Front] [All] Standard Mode*3*4 [Front Left] [Front Right] [Rear Left] [Rear Right] [Subwoofer] Network Mode*3*4 [High Left] [High Right] [Mid Left] [Mid Right] [Subwoofer] Distance [0] to [210] Select or customize the time alignment settings to reflect the distance between the listener’s position and each speaker. You need to measure the distance between the head of the listener and each speaker unit.
Menu Item Description [Mute Level] If an interruption caused by an audio signal occurs while Apple CarPlay or Android Auto is being used, select mute or attenuate the volume of the AV source and iPhone/ smartphone application. The volume becomes 10 dB lower than the current volume. [Mute] The volume becomes 0. [Off] The volume does not change. [Subwoofer Settings]*5 Select the subwoofer phase (page 118).
5 6 Drag the graph line to set the cutoff position. Drag the lowest point of the graph to set the cutoff slope. The following items can also be set. Switches the subwoofer phase between normal and reverse position. Video settings The menu items vary according to the source. [Time Per Photo Slide] Menu Item Description [Time Per Photo Slide] [5sec] [10sec] [15sec] [Manual] Select the interval of image file slideshows on this product.
Communication settings [Connection] Description [Connection] Displaying a list of mobile devices that have been connected via Bluetooth or USB. Connect, disconnect, or delete registered mobile device manually. Touch to delete registered device. To connect a registered device manually, perform the following: • For an Apple CarPlay or Android Auto connection, touch the name of the device. • For a Bluetooth connection, touch . To disconnect the device, touch in the list.
[Driving Position] Menu Item Description [Driving Position] [Right] [Left] Setting the driving position. • Apple CarPlay (page 66) • Android Auto™ (page 70) English [Android Auto Auto-launch] Menu Item Description [Android Auto Autolaunch] [On] [Off] Select [On] to display the Android Auto screen automatically when an Android device is connected to the unit.
Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen. Creating a shortcut 1 2 3 Touch then swipe left on the screen. Touch . Touch the star icon of the menu item for which to create a shortcut. The star icon for the selected menu is filled in. TIP To cancel the registration, touch the star icon in the menu column again. Selecting a shortcut 1 2 3 4 Touch then swipe left on the screen.
Other functions Setting the clock display 1 2 Touch the current time on the screen. Set the following items in the settings. • The date display format: day-month-year, month-day-year, or year-month-day • The time display format: [12hour] or [24hour] • The UTC (Universal Time Coordinated) time zone difference: [UTC-12h] to [UTC+14h] • Day-light saving time: [On] or [Off] You can also configure these items in [Clock Settings] (page 108).
2 Touch the desired mode. Displays images across the entire screen. [Zoom] [Normal] [Trimming] NOTE Some images may not be displayed across the entire screen. Displays the images enlarging them vertically. Displays images without changing the ratio. An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. NOTE [Trimming] is for image files only.
Appendix – Park your vehicle in a safe place and apply the parking brake. Troubleshooting Common problems A black screen is displayed, and operation is not possible using the touch panel keys. → [Power OFF] mode is on. – Touch any button on this product to release the mode. Bluetooth operation does not work. → The power failed for the Bluetooth module of this product. – Turn the ignition switch to OFF and then to ON.
Sound from the iPhone cannot be heard. → The audio output direction may switch automatically when the Bluetooth and USB connections are used at the same time. – Use the iPhone to change the audio output direction. No back camera image when the vehicle is in reverse. → The back camera input setting on the receiver is set to Off. – Change the back camera setting to On in the settings menu. (Refer to the System Settings section of this manual to adjust.) → The camera input may be loose or not connected.
Problems with Application screen The screen is displayed, but operation does not work at all. → An error has occurred. – Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again. – When an Android device is connected, disconnect the Bluetooth connection from this product and then reconnect it. The smartphone was not charged.
disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance. No Content → TuneScan™ is not available. – Perform the operation with another preset channel. Channel Not Available → The channel that you have requested is not a valid SiriusXM channel. – Visit www.siriusxm.com for more information about the SiriusXM channel lineup.
– Check that the files in the USB storage device are compatible with this product. → Security for the connected USB storage device is enabled. – Follow the USB storage device instructions to disable security. Protect → All the files on the connected USB storage device are embedded with DRM. – Replace the USB storage device. Incompatible USB → The connected USB storage device is not supported by this product. – Disconnect your device and replace it with a compatible USB storage device.
contact your dealer or an authorized Pioneer Service Station. Apple CarPlay Please attach the GPS antenna in order to use Apple CarPlay over Wireless. → This unit cannot properly detect the GPS signal from the GPS antenna. – Check the GPS antenna installation and connection. For details about the connection and installation, refer to the Installation Manual. The speed sensor is disconnected. Please attach it. → The speed sensor cannot detect any signal. – Check the speed signal cable connection.
the screen. If the error message is still displayed after performing on-screen instructions, please reconnect the device. Compatibility Common notes about the USB storage device • Do not leave the USB storage device in any location with high temperatures. • Depending on the kind of the USB storage device you use, this product may not recognize the storage device or files may not be played back properly. • The text information of some audio and video files may not be correctly displayed.
USB storage device CODEC FORMAT MP3 compatibility • Ver. 2.x of ID3 tag is prioritized when both Ver. 1.x and Ver. 2.x exist. • This product is not compatible with the following: MP3i (MP3 interactive), mp3 PRO, m3u playlist SAMPLING FREQUENCY TRANSMISSION RATE ID3 TAG 8 kHz to 48 kHz 8 kbps to 320 kbps (CBR)/VBR Folder Browse mode ver.1.0/1.1/2.2/ 2.3/2.4 Music Browse mode ver.2.2/2.3/2.4 WMA compatibility • This product is not compatible with the following: Windows Media™ Audio 9.
.avi Compatible video codec Maximum resolution Maximum frame rate MPEG4, DivX, H.264, H.263 1 920 × 1 080 30 fps .mpg/.mpeg Compatible video codec Maximum resolution Maximum frame rate DivX 720 × 576 30 fps .mp4 Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, H.263 1 920 × 1 080 30 fps .3gp Compatible video codec 1 920 × 1 080 30 fps .mkv Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, VC-1 1 920 × 1 080 30 fps .
SiriusXM and all related marks and logos are trademarks of Sirius XM Radio, Inc. All rights reserved. Bluetooth Wi-Fi USB Type-C USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum. HDMI The Wi-Fi CERTIFIED™ Logo and the Wi-Fi Protected Setup™ Logo are registered trademarks of Wi-Fi Alliance®. HD Radio™ Technology The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc. FLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2013 Xiph.
AAC Android Auto Android Auto is a trademark of Google LLC. T-Kernel 2.0 This Product uses the Source Code of TKernel 2.0 under T-License 2.2 granted by TRON Forum (www.tron.org). High-Resolution Audio Detailed information regarding connected iPhone devices The product with this logo is conformed to High-Resolution Audio standard defined by Japan Audio Society. This logo is used under license from Japan Audio Society.
iPhone, Siri, and Lightning Apple Music Apple Music is a trademark of Apple Inc., registered in the U.S. and other countries. App Store App Store is a service mark of Apple Inc., registered in the U.S. and other countries. iOS IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. iTunes iTunes is a trademark of Apple Inc., registered in the U.S. and other countries. Apple CarPlay is a trademark of Apple Inc.
Depending on the iPhone models, it may not be compatible with some AV sources. For details about iPhone compatibility with this product, refer to the information on our website. Amazon, Alexa, Kindle, Audible, Echo, Amazon Music and all related marks are trademarks of Amazon.com, Inc. or its affiliates. METRA ® Gracenote Gracenote, the Gracenote logo and logotype are either a registered trademark or a trademark of Gracenote, Inc. in the United States and/or other countries.
Notice regarding video viewing Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights as protected by the Copyright Law. Using the LCD screen correctly Handling the LCD screen • When the LCD screen is subjected to direct sunlight for a long period of time, it will become very hot, resulting in possible damage to the LCD screen. When not using this product, avoid exposing it to direct sunlight as much as possible.
Liquid crystal display (LCD) screen Maintaining the LCD screen • When removing dust from or cleaning the LCD screen, first turn this product off and then wipe the screen with a soft dry cloth. • When wiping the LCD screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners. LED (light-emitting diode) backlight A light emitting diode is used inside the display to illuminate the LCD screen.
Display Screen size/aspect ratio: (DMH-WT8600NEX/DMH-WT86NEX) 10.1 inch wide/16:9 (effective display area: 223.68 mm × 125.82 mm) (8-3/4 in. × 4-7/8 in.) (DMH-WT7600NEX/DMH-WT76NEX) 9.0 inch wide/16:9 (effective display area: 198.72 mm × 111.78 mm) (7-3/4 in. × 43/8 in.) (DMH-WC6600NEX) 9.0 inch wide/16:9 (effective display area: 198.72 mm × 111.78 mm) (7-3/4 in. × 43/8 in.) (DMH-W4660NEX/DMH-W4600NEX/ DMH-WC5700NEX) 6.78 inch wide/16:9 (effective display area: 152.4 mm × 80.208 mm) (6 in. × 3-1/ 8 in.
kHz/4 kHz/5 kHz/6.3 kHz/8 kHz/10 kHz/ 12.5 kHz Slope: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct Phase (Mid): Normal/Reverse LPF (Subwoofer): ON/OFF Frequency: 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Hz Slope: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct, -30 dB/oct, -36 dB/oct Phase (Subwoofer): Normal/Reverse Time alignment: 0 to 210 inch (0.6 inch/step) Speaker level: +10 dB to -24 dB (1 dB/step) USB USB standard spec: USB 1.1, USB 2.0 full speed, USB 2.
Bluetooth Version: Bluetooth 4.2 certified Output power: +4 dBm Max. (Power class 2) Bluetooth Low Energy output power: +3.5 dBm Max. Frequency band(s): 2 402 MHz to 2 480 MHz Bluetooth profiles: HFP (Hands Free Profile) 1.7 PBAP (Phone Book Access Profile) 1.2 A2DP (Advanced Audio Distribution Profile) 1.3 AVRCP (Audio/Video Remote Control Profile) 1.6.1 SPP (Serial Port Profile) 1.2 AVCTP (Audio/Video Control Transport Protocol) 1.4 AVDTP (Audio/Video Distribution Transport Protocol) 1.
Wi-Fi Frequency channel: 1 to 11 ch (2.4 GHz) 149, 151, 155 ch (5 GHz) Security: OPEN/WEP/WPA (personal)/WPA2 (personal) S/N ratio: 90 dB (IHF-A) NOTE Specifications and design are subject to possible modifications without notice due to improvements.
© 2021 PIONEER CORPORATION UC