Owner manual
11
En
Display
BEFORE OPERATIONS: PANEL FACILITIES
51 CARD indicator
Lights when the dot matrix displays information about the memory card.
52 TITLE indicator
Lights when the dot matrix displays track title information.
53 FOLDER indicator
Lights when the dot matrix displays folder name information.
54 CD indicator
Lights when CD player has been selected as main source.
55 CD-ROM indicator
Lights when a CD-ROM disc has been loaded in the CD player.
56 CUE indicator
Lights when a cue point has been set, and flashes to indicate that the player is
in pause mode and a new cue point can be input.
57 Track number display.
Displays track numbers.
58 LOOP indicator
Lights during loop operation.
59 RELOOP indicator
Lights during reloop standby and loop operation.
60 REMAIN indicator
Lights to indicate that the track’s remaining time is being shown.
61 Play status display
This bar graph scale provides a quick visual indication of the current point in
playback. The full-scale bar graph indicates an entire track.
÷ During the elapsed time display, the graph lights from left to right.
÷ During the remaining time display, the graph goes out from left to right.
÷ When less than 30 seconds of playback time remain on a track, the display
flashes slowly, then flashes quickly when less than 15 seconds of playback
time remains.
62 Time (minutes) display (M)
63 Time (seconds) display (S)
64 Frame display (F)
75 frames are equivalent to 1 second.
65 A.CUE indicator
Lights when Auto Cue is ON.
51
52
53
54
55
56
57 58 59
60
61 62 63 64 65 66 67
68
69
70
71727375 7476
[EJECT Block] (33~35)
33 CARD EJECT button (0)
Do not press this button while the slot indicator is flashing.
34 CD EJECT button (0)
When this button is pressed, the loaded disc stops rotating and the disc emerges
from the disc loading slot. When the CD EJECT LOCK switch is set to LOCK, the disc
will not be ejected unless the button is pressed from the pause mode.
35 CD EJECT LOCK switch
UNLOCK: The loaded disc is ejected whenever the CD EJECT button is pressed,
even from play mode.
LOCK: The loaded disc is not ejected if the CD EJECT button is pressed from the
play mode. To eject the disc, set the CD to pause first, then press the CD EJECT
button.
[MIXOUT Block] (36~37)
36 MIXOUT button / indicator (*)
☞
P. 1 8
When the source selector is set to CD, pressing this button to ON causes the memory
card’s track playback to be output to the AUDIO OUT connector.
37 CARD TRIM dial (*)
☞
P. 1 8
Use to adjust the audio volume output to the CARD MONITOR connector when the
source selector is set to CD.
[ISOLATOR Block] (38~43)
38 ISOLATOR BAND HIGH select button / indicator (*)
☞
P. 1 7
Press to cut the high-range frequency band.
39 ISOLATOR BAND MID select button / indicator (*)
☞
P. 1 7
Press to cut the mid-range frequency band.
40 ISOLATOR BAND LOW select button / indicator (*)
☞
P. 17
Press to cut the low-range frequency band.
41 ISOLATOR CARD select indicator (*)
☞
P. 17
42 ISOLATOR CD select indicator (*)
☞
P. 1 7
43 ISOLATOR RESET/SELECT button (*)
☞
P. 1 7
Use to select whether isolator function is applied to CD or memory card. Also press
to reset the condition of isolator select buttons (HIGH, MID, LOW), and return to
default OFF condition.
66 BPM counter display
Displays the beats-per-minute (BPM) of the currently playing track. Depend-
ing on content, the BPM counter may be unable to detect the BPM of some
tracks.
67 TEMPO display
Displays how much change is being applied to playback speed by the TEMPO
control slider.
68 Level meter (CARD, CD, L, R)
CARD: Lights during memory card playback
CD: Lights during CD playback
L, R: Function as level meters for Left and Right channel during single play-
back.
69 Tempo control range indicators (±6, ±10, ±16)
Indicates the variable tempo adjustment range selected with the TEMPO con-
trol range button.
70 Master Tempo indicator (MT)
Lights when the master tempo function is ON.
71 EJECT LOCK indicator
Lights when the CD EJECT LOCK switch is set to the LOCK position.
72 Card playback bit rate / BPM display (K BPS, BPM)
During dual mode playback, displays the memory card playback bit rate or
memory card BPM.
K BPS: Kilobits Per Second
73 Card time in Minutes/Seconds (M/S) / Frame (F)
indicator
Lights during dual-mode playback to indicate the dot matrix panel is display-
ing memory card time/frame information.
74 Dot matrix display panel
Displays alphanumeric data.
75 Card track indicator (TR)
Lights during dual-mode playback to indicate the dot matrix panel is display-
ing memory card track information.
76 EDIT indicator
Lights when unit is in edit mode.