DVD-114 Industrial DVD-ROM OPERATING INSTRUCTIONS Version 1.00 June 8, 2000 Pioneer Corporation Pioneer New Media Technologies, Inc.
This manual is copyrighted with all rights reserved. No part of this document may be reprinted, produced, translated or utilized in any form or by any means now known or hereafter invented including, but not limited to, any electronic, mechanical, photocopying and recording or information storage and retrieval system means, without the express written permission from Pioneer New Media Technologies, Inc. Every effort has been made to ensure that the information in this manual is accurate.
IMPORTANT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
Table of Contents 1.0 General Information......................................................................................................... 2 2.0 Safety Instructions .......................................................................................................... 3 2.1 Drive Precautions .................................................................................................... 3 2.2 Disc Precautions .................................................................................
DVD-114 Operating Instructions 1.0 GENERAL INFORMATION Thank you for buying this Pioneer DVD-ROM drive. Please read through these operating instructions to understand your unit properly. After you have finished reading the instructions, put them away in a safe place for future reference. WARNING: To prevent fire or shock hazard, do not expose drive to rain or moisture. CAUTION: This product contains a laser diode of higher class than 1.
DVD-114 Operating Instructions ASIAN Pioneer Electronics Asiacentre PTE Ltd. Service Department 253 Alexandra Road, #04-01 Singapore 159936 JAPAN & OTHERS Pioneer Corporation (Head Office) Customer Support Center 4-1, Meguro 1-Chrome, Meguro-KU, Tokyo 153-8654 Japan 2.0 SAFETY INSTRUCTIONS To ensure your personal safety and to maximize the full operating potential of your drive, read and follow the precautions listed below. 2.
DVD-114 Operating Instructions Servicing – Opening or removing the cover exposes you to possible electrical shock or other danger. Contact a Pioneer authorized service representative for repairing this drive (refer to the enclosed Service & Support Card). 2.2 Disc Precautions Cracked or warped discs may damage the drive. If a disc breaks inside of the unit, pieces are likely to strike the optics. Non-standard disc shapes are unusable on this drive. These shapes include hearts, diamonds, polygons, etc.
DVD-114 Operating Instructions 3.2 • Correspondence with Kodak Photo CD multi-sessions • Conforming to MPC-3 specifications • Half-height size • Power tray loading • Microsoft® Windows® 95 and Windows® 98 (Plug & Play) supported Precautions With CD-RW/DVD-RW Discs This drive is able to read out CD-RW/DVD-RW disc data. The following items may affect speed or compatibility. 3.
DVD-114 Operating Instructions 4.1 Front View and Vertical installation DVD-114 Front View * Vertical Installation 1) Disc Tray - Auto-loading using the Eject button place a disc on the tray with the label facing up A When installing the drive vertically, slide the tray’s lower claw in before mounting a disc.
DVD-114 Operating Instructions 7) Audio Output connector for analog audio output, uses a Modex 70553 connector Select the appropriate cable from the following chart: Pin Name 1 2 3 4 L G G R Function Left channel audio output Ground Ground Right channel audio output 8) Device Configuration Jumper set this jumper switch to select the drive use mode supporting the computer (jumpered = ON; no jumper = OFF) Pin 1 2 3 4 5 Name MA*1 SL CS Function on Drive set to Master mode on Drive set to Slave mode on
DVD-114 Operating Instructions 5.0 INSTALLATION The following information provides step-by-step instructions to install the DVD-114. 5.1 Positioning the Drive Before beginning the installation, decide if the drive needs to be positioned horizontally (standard) or vertically. Review all instructions prior to install the DVD-114 drive. 1. Turn OFF the computer and remove the cover or front panel. 2. Remove the blank drive-cover from the front panel. 3. Attach the slide rails to the drive.
DVD-114 Operating Instructions 6.0 SPECIFICATIONS 6.1 General Functions Disc Diameter 12 cm (4.72”) 8 cm (3.15”) * * 8 cm discs are unavailable when mounting the drive vertically Transfer Rate (sustained) DVD-ROM CD-ROM Maximum 13,500 kBytes/sec * Maximum 6,000 kBytes/sec * * data transfer rate may not be output if disc is damaged or dirty Access Time (Random Average) DVD-ROM CD-ROM Data Butter Capacity 512 kBytes 6.2 100 ms 80 ms Specific Functions Audio Output Line 0.7 Vrms ± 0.
DVD-114 Operating Instructions DVD-114 Industrial DVD-ROM Drive Pioneer Electronic Corporation 4-1, Meguro 1-chome Meguro-ku, Tokyo 153 JAPAN http://www.pioneer.co.jp Pioneer New Media Technologies, Inc. 2265 East 220th Street Long Beach, California 90810 United States of America (310) 952-2111 http://www.pioneerusa.