Car Video System User Manual

ManualsBrandsPioneer ManualsCar Video SystemDVH-3250UB

Enhancing compressed audio and

restoring rich sound (sound retriever)

1 Press 1/S.Rtrv/DVD MENU to cycle between:

OFF (off)—1 —2

1 is effective for low compression rates, and 2 is

effective for high compression rates.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

3 Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

REPEAT (repeat play)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a repeat play range.

For details, refer to Selecting a repeat play range on

the previous page.

3 Press M.C. to confirm the selection.

RANDOM (random play)

! This function is available for JPEG files, CDs and

compressed audio files.

1 Press M.C. to turn random play on or off.

SCAN (scan play)

Scan play lets you hear the first 10 seconds of each

track on the CD.

! This function is available for CDs and compressed

audio disc.

1 Press M.C. to turn scan play on or off.

LR SELECT (audio output)

When playing DVD video discs recorded with LPCM

audio, you can switch the audio output.

When playing Video CD discs, you can switch be-

tween stereo and monaural audio output.

! This function is available for DVD and Video CD.

! This function is not available when disc playback

is stopped.

! You may not be able to select or use this function

depending on the disc and the playback location.

! If you select Linear PCM, you can operate this

function when playing a disc recorded on a dual

mono mode. (Refer to Setting for digital output on

page 25.)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! L+R – left and right

! L – left

! R – right

! MIX – mixing left and right

3 Press M.C. to confirm the selection.

ROTATION (picture rotation)

! This function is available for JPEG files.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! 0 – Cancel the rotation

! 90 – Rotate 90 degrees

! 180 – Rotate 180 degrees

! –90 – Rotate –90 degrees

3 Press M.C. to confirm the selection.

PAUSE (pause)

1 Press M.C. to pause or resume.

PLAYLIST (playlist)

You have two methods for playing DVD-VR disc; ORI-

GINAL (original) and PLAYLIST (playlist).

! Titles created with DVD recorders are called origi-

nal. Based on original, rearranged titles are called

playlist. Playlists are created on DVD-R/RW discs.

! This function is available for DVD-VR.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired play mode.

If the play mode is changed, playback starts from

the beginning of the selected play mode.

3 Press M.C. to confirm the selection.

Section

Operating this unit