DVR-04_HDD_KU.book 1 ページ 2004年4月15日 木曜日 午前10時48分 DVD Recorder DVR-420H DVR-520H Register Your Product on www.pioneerelectronics.
DVR-04_HDD_KU.book 2 ページ 2004年4月15日 木曜日 午前10時48分 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
DVR-04_HDD_KU.book 3 ページ 2004年4月15日 木曜日 午前10時48分 IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference. HEED WARNINGS — All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS — All operating and use instructions should be followed.
DVR-04_HDD_KU.book 4 ページ 2004年4月15日 木曜日 DANGER VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
DVR-04_HDD_KU.book 5 ページ 2004年4月15日 木曜日 午前10時48分 We Want You Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
DVR-04_HDD_KU.book 6 ページ 2004年4月15日 木曜日 午前10時48分 Contents 01 Before you start 06 Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Putting the batteries in the remote control . . . . . . . . 10 Using the remote control . . . . . . . . . . . . . . . . . . . . . 10 Disc / content format playback compatibility . . . . . . 11 About the internal hard disk drive . . . . . . . . . . . . . . .
DVR-04_HDD_KU.book 7 ページ 2004年4月15日 木曜日 午前10時48分 11 The Disc Setup menu Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Initialize settings . . . . . . . . . . . . . . . . . . . . . . . . . . . HDD Initialize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finalize settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 90 90 90 12 The Video/Audio Adjust menu Setting the picture quality for TV and external inputs . . . . . . . . . . . . . . . . . . . . . .
DVR-04_HDD_KU.book 8 ページ 2004年4月15日 木曜日 午前10時48分 Before you start 01 Chapter 1 Before you start Features HDD • HDD recording You can record up to 102 hours of video (in EP mode) on the internal 80GB (gigabyte) hard disk (HDD). With both recordable DVD and a high-capacity HDD in the same recorder, you have the flexibility to keep recordings on the HDD for quick access anytime, or record to DVD for archiving or playing on other DVD players.
DVR-04_HDD_KU.book 9 ページ 2004年4月15日 木曜日 午前10時48分 Before you start • One Touch Recording Use One Touch Recording to start recording immediately in 30 minute blocks. Each time you press the REC button, the recording time is extended by another 30 minutes. • Optimized recording Optimized recording adjusts the recording quality automatically if a timer recording will not fit onto a disc with the settings that you made.
DVR-04_HDD_KU.book 10 ページ 2004年4月15日 木曜日 午前10時48分 Before you start 01 What’s in the box Please confirm that the following accessories are in the box when you open it. • Remote control • AA/R6P dry cell batteries x2 • Audio/video cable (red/white/yellow) • RF antenna cable • Power cable • These operating instructions • Warranty card Putting the batteries in the remote control 1 Open the battery compartment cover on the back of the remote control.
DVR-04_HDD_KU.book 11 ページ 2004年4月15日 木曜日 午前10時48分 Before you start 01 1 Discs should be finalized in this recorder before playing. Unfinalized VR mode and Video mode discs may not play. 2 Cannot read the CPRM information will show in the display when you load a disc. However, this will not affect playback. 3 Copy-once protected disc titles will not play.
DVR-04_HDD_KU.book 12 ページ 2004年4月15日 01 木曜日 午前10時48分 Before you start WMA (Windows Media Audio) compatibility Frequently asked questions • What’s the difference between DVD-R and DVD-RW? The Windows Media® logo printed on the box indicates that this recorder can playback Windows Media Audio content. WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. WMA content can be encoded by using Windows Media® Player version 7, 7.
DVR-04_HDD_KU.book 13 ページ 2004年4月15日 木曜日 午前10時48分 Before you start 01 • Do I need two DVD recorders for editing? What kind of editing can I do? Unlike editing video tape, you only need one DVD recorder to edit discs. With DVD, you edit by making a ‘Play List’ of what to play and when to play it. On playback, the recorder plays the disc according to the Play List.
DVR-04_HDD_KU.book 14 ページ 2004年4月15日 02 木曜日 午前10時48分 Connecting up Chapter 2 Connecting up Rear panel connections 1 2 3 R OUT 4 OUTPUT 1 L R 7 INPUT 1/ AUTO START REC L IN AC IN VHF/UHF Y PB PR COMPONENT VIDEO OUT AUDIO VIDEO OUTPUT 2 S-VIDEO AUDIO VIDEO INPUT 3 S-VIDEO IN OPTICAL CONTROL DIGITAL OUT 5 6 1 VHF/UHF IN/OUT Connect your TV antenna to the VHF/UHF IN jack. The signal is passed through to the VHF/UHF OUT jack for connection to your TV.
DVR-04_HDD_KU.book 15 ページ 2004年4月15日 木曜日 午前10時48分 Connecting up 02 Easy connections The setup described here is a basic configuration that allows you to record TV programs on both this recorder and your VCR. When watching recordings from this recorder, set your TV to input 1; switch to input 2 to watch a video playing in the VCR. Important • This recorder is equipped with copy protection technology.
DVR-04_HDD_KU.book 16 ページ 2004年4月15日 02 木曜日 午前10時48分 Connecting up Using other types of video output This recorder has standard (composite), S-video and component video outputs. The main difference between them is the quality of the picture. S-video delivers a better picture than composite video, while component video gives better picture quality still. The variety of outputs also gives you the flexibility of connecting your particular equipment using the best connection type available.
DVR-04_HDD_KU.book 17 ページ 2004年4月15日 木曜日 午前10時48分 Connecting up 02 Connecting to a cable box or satellite receiver (1) If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page. If many or all the channels are scrambled, we recommend using the setup on the following page. Using the setup on this page you can: • Record unscrambled channels by selecting them on this recorder.
DVR-04_HDD_KU.book 18 ページ 2004年4月15日 02 木曜日 午前10時48分 Connecting up Connecting to a cable box or satellite receiver (2) If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup. Using the setup on this page you can: • Record any channel by selecting it on the cable box/satellite tuner. • Record using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 54).
DVR-04_HDD_KU.book 19 ページ 2004年4月15日 木曜日 午前10時48分 Connecting up 02 Connecting to an AV amplifier or receiver To enjoy multichannel surround sound you need to connect this recorder to an AV amp/receiver using the digital optical output. In addition to the digital connection, we recommend also connecting using the stereo analog connection. You’ll probably also want to connect a video output to your AV amp/receiver.
DVR-04_HDD_KU.book 20 ページ 2004年4月15日 02 木曜日 午前10時48分 Connecting up Connecting a DV camcorder (DVR-520H only) Connecting other AV sources Using the front panel DV IN/OUT jack, it is possible to connect a DV camcorder or video deck, or DVD-R/RW recorder and digitally transfer DV tapes or DVD-R/RW discs to DVD-R/RW. Connecting a VCR or analog camcorder Important DV IN/OUT AUDIO/VIDEO OUTPUT AUDIO/VIDEO INPUT 1 • This jack is for connection to DV equipment only.
DVR-04_HDD_KU.book 21 ページ 2004年4月15日 木曜日 午前10時48分 Controls and displays 03 Chapter 3 Controls and displays Front panel 1 STANDBY/ON 2 3 4 HDD DVD 5 6 PULL-OPEN OPEN/CLOSE REC ONE TOUCH COPY DV IN/OUT 15 1 STANDBY/ON Press to switch the recorder on/into standby. 2 HDD Press to switch to the hard disk drive (HDD) for recording and playback. The button lights when HDD is selected. 3 DVD Press to switch to DVD for recording and playback. The button lights when DVD is selected.
DVR-04_HDD_KU.book 22 ページ 2004年4月15日 03 木曜日 午前10時48分 Controls and displays Display 1 2 3 4 5 6 7 8 9 10 2 PLAY / REC indicators Lights during playback / recording; blinks when playback / recording is paused. 3 (page 27) The ‘ ’ and ‘ ’ indicators light to indicate that the HDD or DVD is selected for recording/playback. 12 13 15 16 14 1 / Arrows indicate the copy direction between the HDD ( ) and DVD ( ). 11 12 (page 47) Lights when a timer recording has been set.
DVR-04_HDD_KU.book 23 ページ 2004年4月15日 木曜日 午前10時48分 Controls and displays 03 6 DVD (page 27) Press to select the DVD for recording or playback.
DVR-04_HDD_KU.book 24 ページ 2004年4月15日 03 木曜日 午前10時48分 Controls and displays 18 Playback controls (page 29) REV SCAN / FWD SCAN (page 37) Press to start reverse or forward scanning. Press again to change the speed. PLAY Press to start playback. PAUSE Press to pause playback or recording. STOP Press to stop playback. CM BACK (commercial back) Press repeatedly to skip progressively backward through the audio or video playing.
DVR-04_HDD_KU.book 25 ページ 2004年4月15日 木曜日 午前10時48分 Getting started 04 Chapter 4 Getting started Switching on and setting up When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video and audio output settings. If you’re using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder.
DVR-04_HDD_KU.book 26 ページ 2004年4月15日 木曜日 午前10時48分 Getting started 04 After selecting Antenna or Cable the recorder starts automatic tuning. This takes a couple of minutes to complete. Use the / (cursor left/right) buttons to set your time zone. Initial Setup Tuning 7/68 Cancel 6 Select ‘Auto’ for automatic time setting, then press ENTER.
DVR-04_HDD_KU.book 27 ページ 2004年4月15日 木曜日 午前10時48分 Getting started Use the / (cursor up/down) buttons to select Compatible, Not Compatible, or Don’t Know, then press ENTER. • Note that progressive scan video is only output through the component video outputs (see page 16). 9 Is this recorder connected to an AV amp/receiver for digital audio? 04 12 That’s it! Press ENTER to finish setting up, or select ‘Go Back’ if you want to start again.
DVR-04_HDD_KU.book 28 ページ 2004年4月15日 木曜日 午前10時48分 Getting started 04 • Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125. Making your first recording This quick guide shows you how to make a basic recording of a TV program on either the HDD, or to a recordable DVD. 6 Recording is covered in much more detail in chapter 6 (Recording). • You can pause recording by pressing PAUSE. Press REC or PAUSE again to restart recording.
DVR-04_HDD_KU.book 29 ページ 2004年4月15日 木曜日 午前10時48分 Getting started 04 Changing audio channels Important Some TV programs are broadcast with both a main and a Second Audio Program (SAP). You can change the TV audio using the AUDIO button. • Throughout this manual, the term ‘DVD’ means playback-only DVD-Video discs and DVD-R/RW. If a function is specific to a particular kind of DVD disc, it is specified.
DVR-04_HDD_KU.book 30 ページ 2004年4月15日 04 木曜日 午前10時48分 Getting started Playing DVD discs Playing from the HDD The table below shows the basic playback controls for DVD-Video, and recordable DVD discs. The table below shows the basic playback controls when playing video recorded on the hard disk (HDD). Press to start playback. If RESUME is displayed on-screen, playback starts from the place last stopped. PLAY STOP PAUSE Press to start playback.
DVR-04_HDD_KU.book 31 ページ 2004年4月15日 木曜日 午前10時48分 Getting started 04 Playing CDs and WMA/MP3 discs Playing Video CDs The table below shows the basic playback controls for audio CDs, and WMA/MP3 files. The table below shows the basic playback controls for Video CDs. Press to start playback. PLAY STOP Press to stop playback. Some discs feature Playback Control (PBC for short) menus.
DVR-04_HDD_KU.book 32 ページ 2004年4月15日 04 木曜日 午前10時48分 Getting started Using the Home Menu From the Home Menu screen you can access all the features of the recorder. Press HOME MENU to display the Home Menu screen: Timer Recording Disc Setup Disc Navigator Initial Setup Copy Video/Audio Adjust Disc History Play Mode PhotoViewer DV Record Displaying disc information onscreen You can display various on-screen information about the disc loaded or the HDD.
DVR-04_HDD_KU.book 33 ページ 2004年4月15日 木曜日 午前10時48分 Getting started 04 HDD and removable disc activity display Press DISPLAY once to see the HDD and removable disc (DVD, etc.) activity. Use the HDD and DVD buttons to switch between the two kinds of display. The example displays below show high-speed copying from HDD to DVD, and HDD chase playback. HDD DVD-RW Video Hi-Speed Copy Remain –h––m Stop 8 Copy control information Shows recording restrictions of the current channel program.
DVR-04_HDD_KU.book 34 ページ 2004年4月15日 木曜日 午前10時48分 Getting started 04 4 Total running time of title Note 5 Angle indicator Lights during multi-angle scenes. • When using the simultaneous play and record feature, the display shows information for playback only. Play display 2 1 2 3 4 Play DVD-R Video 5 3–2 0. 00. 15 Chapter Time 0. 00. 21 Chapter Total 0. 01. 52 4.
DVR-04_HDD_KU.book 35 ページ 2004年4月15日 木曜日 午前10時48分 Playback 05 Chapter 5 Playback Introduction Most of the features described in this chapter make use of on-screen displays. Navigate these using the / / / (cursor buttons) and ENTER. To go back one level from any screen, use the RETURN button. Remember also that the button guide at the bottom of every screen shows which buttons do what. Using the Disc Navigator to browse the contents of a disc.
DVR-04_HDD_KU.book 36 ページ 2004年4月15日 05 木曜日 午前10時48分 Playback Depending on the type of disc you have loaded, the Disc Navigator looks slightly different. The screen for DVD discs shows the titles on the left and the chapters on the right. Select a title, or a chapter within a title. Disc Navigator DVD Title (1-10) Title 01 Title 02 Title 03 Title 04 Title 05 Title 06 Title 07 Title 08 2 Press HOME MENU and select ‘Disc Navigator’ from the on-screen display.
DVR-04_HDD_KU.book 37 ページ 2004年4月15日 木曜日 午前10時48分 Playback 05 2 Press NAVI MARK anywhere in the title to make the displayed picture the thumbnail for that title. • For greater control over the exact frame you want to use, you can use the PAUSE and/or slow-motion/ frame advance/reverse controls ( / ). CD Video CD WMA/MP3 1 During playback, use the number buttons to input a track number. For example, for track 6, press 6; for track 24, press 2, then 4. • To clear and start again, press CLEAR.
DVR-04_HDD_KU.book 38 ページ 2004年4月15日 木曜日 午前10時48分 Playback 05 • No subtitles are displayed while scanning DVD-Video discs. Note • The picture quality during slow motion playback is not as good as during normal playback and depends on the disc being played. • Analog and digital sound is output when scanning DVDs with Dolby Digital or Linear PCM sound on forward SCAN 1. (Linear PCM is output from the optical digital output.*) No sound is output when using other scan speeds.
DVR-04_HDD_KU.book 39 ページ 2004年4月15日 木曜日 午前10時48分 Playback 05 Search Mode The Play Mode menu ALL ALL The Play Mode menu gives you access to search functions, repeat and program play functions. Important • You can’t use the Play Mode features with Video CDs playing in PBC mode, or while a DVD disc menu is being displayed. For other restrictions, see the following sections.
DVR-04_HDD_KU.book 40 ページ 2004年4月15日 木曜日 午前10時48分 Playback 05 1 During playback, select ‘A-B Repeat’ from the Play Mode menu. VR mode • For VR mode DVD discs, select Repeat Disc, Repeat Title or Repeat Chapter (or Repeat Off). 2 With ‘A (Loop Start)’ highlighted, press ENTER at the point you want the loop to start. DVD-Video Video mode HDD Play Mode Search Mode A-B Repeat Repeat Program • For HDD, DVD-Video and Video mode DVD discs, select Repeat Title or Repeat Chapter (or Repeat Off).
DVR-04_HDD_KU.book 41 ページ 2004年4月15日 木曜日 午前10時48分 Playback 05 On the left side is the program list, then to the right is a list of titles (DVD), folders (WMA/MP3), or tracks (CD, Video CDs). On the far right is a list of chapters (DVD) or tracks (WMA/MP3). 3 Select a title, chapter, folder or track for the current step in the program list. For a DVD disc, you can add a whole title, or a chapter within a title to the program list. 4 Repeat step 3 to build up a program list.
DVR-04_HDD_KU.book 42 ページ 2004年4月15日 05 木曜日 午前10時48分 Playback Displaying and switching subtitles DVD-Video Switching DVD soundtracks DVD-Video Some DVD discs have subtitles in one or more languages; the disc box will usually tell you which subtitle languages are available. You can switch subtitle language during playback. Check the disc packaging for details of the subtitle options.
DVR-04_HDD_KU.book 43 ページ 2004年4月15日 木曜日 午前10時48分 Playback 05 Switching audio channels VR mode CD Video CD WMA/MP3 For VR mode content that has both a main and a SAP (Secondary Audio Program) audio channel, you can switch between main (L), SAP (R), or both (L+R). When playing Video CDs and audio CDs you can switch between stereo, just the left channel or just the right channel.
DVR-04_HDD_KU.book 44 ページ 2004年4月15日 06 木曜日 午前10時48分 Recording Chapter 6 Recording About DVD recording About HDD recording This recorder can record on both DVD-R and DVD-RW media. The main difference between the two is that DVDR discs can only be recorded once, while DVD-RW can be recorded, erased and re-recorded many times. Recording to the internal hard disk drive (HDD) is basically similar to recording to a VR mode DVD-RW disc.
DVR-04_HDD_KU.book 45 ページ 2004年4月15日 木曜日 午前10時48分 Recording When setting a timer recording there is a further option, AUTO, which maximizes the recording quality for the space available on the disc loaded at the time of recording. (If recording to the HDD, the recording quality is maximized to fit on to a DVD disc.) In all except the FINE/MN32 modes, sound is recorded in two channel Dolby Digital format. When set to FINE/ MN32, sound is recorded in high quality, uncompressed Linear PCM format.
DVR-04_HDD_KU.book 46 ページ 2004年4月15日 06 木曜日 午前10時48分 Recording The setting is indicated in the front panel display, and shown on-screen together with the recording time for a blank recordable disc. If a recordable disc is loaded, the approximate remaining recording time for that disc is also shown. (Note that if the On Screen Display setting (see On Screen Display on page 95) is Off then this information is not displayed.) 2 Use the CHANNEL +/– buttons to select the TV channel to record.
DVR-04_HDD_KU.book 47 ページ 2004年4月15日 木曜日 午前10時48分 Recording 06 Setting a timer recording VR mode Video mode HDD Using the timer recording features you can program up to 32 timer recordings up to a month in advance. Timer recording programs can be set to record just once, every day, or every week.
DVR-04_HDD_KU.book 48 ページ 2004年4月15日 木曜日 午前10時48分 Recording 06 1 Press EASY TIMER. Alternatively, you can also access from the Home Menu (press HOME MENU and select Timer Recording then Easy Timer Recording). • You can go back and reset the start time if you need to by pressing RETURN. 5 Use the / (cursor left/right) to move the cursor to the recording end time on the grid.
DVR-04_HDD_KU.book 49 ページ 2004年4月15日 木曜日 午前10時48分 Recording 06 This screen shows all the timer programs currently set. Timer Recording Date Start Stop CH Mode Rec to Confirm 12/13 MON 7:00 PM 8:00 PM 32 FINE HDD OK 12/14 TUE 9:00 PM 10:00 PM 43 FINE HDD OK New Input HDD Remain DVD Remain 10h20m(FINE) 0h43m(FINE) 1/1 • Each row is for one timer recording program, with the date and time information, channel, recording mode, DVD or HDD and recording status.
DVR-04_HDD_KU.book 50 ページ 2004年4月15日 06 木曜日 午前10時48分 Recording • For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 101) is set to On, the recorder will adjust the recording quality to try and fit the recording on the disc. If the recording will not fit onto the disc even on MN1 recording quality then the Recovery Recording feature will automatically make the recording to the HDD instead.
DVR-04_HDD_KU.book 51 ページ 2004年4月15日 木曜日 午前10時48分 Recording 06 VCR Plus+ programming with the power off Extending a timer recording in progress You can enter a PlusCode number when the recorder is in standby. Note that the recording is always made to the HDD. If you want to record to a DVD disc, you’ll need to switch on the power and use the full VCR Plus+ program screen. You can extend a timer recording beyond the programmed end time in two different ways.
DVR-04_HDD_KU.book 52 ページ 2004年4月15日 06 木曜日 午前10時48分 Recording 2 Use the (cursor up) button to highlight the current timer recording (‘Recording’ is shown in the ‘Confirm’ column), then press ENTER. A screen showing details of the timer recording appears. From this screen, only the recording stop time can be changed. Timer Recording Date 12/13 MON Rec to HDD Start 7 Stop 00 PM 8 CH 00 PM Rec Mode 32 FINE Group Program Set GROUP1 1 If the recorder is on, switch it into standby.
DVR-04_HDD_KU.book 53 ページ 2004年4月15日 木曜日 午前10時48分 Recording 06 Simultaneous recording and playback VR mode HDD Recording from an external component VR mode A feature called Chase Play makes it possible to watch a recording in progress (DVD or HDD) from the start of the recording (as in, playback is ‘chasing’ the recording).
DVR-04_HDD_KU.book 54 ページ 2004年4月15日 木曜日 午前10時48分 Recording 06 3 Set up the recorder. • Use REC MODE to set the recording quality. See Setting the picture quality/recording time on page 45 for detailed information. • Press HDD to record to the hard disk drive, or DVD to record to a DVD. 4 Press REC when you’re ready to start recording. • DVR-520H only: The recorder will only start recording from the DV IN/OUT jack if there is a valid signal.
DVR-04_HDD_KU.book 55 ページ 2004年4月15日 木曜日 午前10時48分 Recording 06 • During DV recording, if a part of the tape is blank, or has copy-protected material on it, this recorder will pause recording. Recording will restart automatically when there is a recordable signal. However, if there is more than 10 seconds of blank tape, this recorder will stop recording and the camcorder should stop (depending on the camcorder).
DVR-04_HDD_KU.book 56 ページ 2004年4月15日 06 木曜日 午前10時48分 Recording • Recording is automatically paused if the recorder detects no signal, or a copy-protected signal. Recording restarts when there is a non-copyprotected signal. • You can pause or stop the recording by selecting Pause Rec or Stop Rec from the on-screen display. You cannot control the camcorder from this remote control during recording.
DVR-04_HDD_KU.book 57 ページ 2004年4月15日 木曜日 午前10時48分 Recording 06 • How long finalization takes depends on the type of disc, how much is recorded on the disc and the number of titles on the disc. A disc recorded in VR mode can take up to one hour to finalize. A disc recorded in Video mode can take up to 20 minutes. Important • Once you’ve finalized a disc recorded in Video mode, you can’t edit or record anything else on that disc.
DVR-04_HDD_KU.book 58 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 Chapter 7 Copying and back-up When copying from HDD to DVD, the speed of copying depends on the recording mode and the kind of DVD disc you’re using. The table at the bottom of the page shows the minimum copying time for one hour of material. Introduction Use the copying features of this recorder to: • Back up important recordings stored on the HDD to a DVD • Make a DVD copy of a recording on the HDD to play in another player.
DVR-04_HDD_KU.book 59 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up Real-time copying Real-time copying is also possible, with the advantage that you can manually set a different recording mode from the original. For example, you can record a title originally recorded in FINE mode in SP mode. When real-time copying from the HDD to a Video mode DVD, the chapter markers in the original material are not copied.
DVR-04_HDD_KU.book 60 ページ 2004年4月15日 07 木曜日 午前10時48分 Copying and back-up Note One Touch Copy* (DVD to HDD) One Touch Copy from DVD to HDD copies a single title to the HDD in real time. You can copy the currently playing title or the currently selected title in the Disc Navigator. When you start copying, playback jumps back to the start of the title, then continues through to the end of the title, when recording automatically stops. The copy will be made in the recording mode (FINE, SP, etc.
DVR-04_HDD_KU.book 61 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 Important • The recorder can only store one Copy List at a time. • The Copy List is erased if the Frame Accurate setting is changed in the Initial Settings menu (see Frame Accurate on page 102). • Resetting the recorder to its factory settings (see Resetting the recorder on page 106) will also erase the Copy List.
DVR-04_HDD_KU.book 62 ページ 2004年4月15日 07 木曜日 午前10時48分 Copying and back-up • Chapter Edit (Chpt Edit) – Edit chapters within a Copy List title (see page 65): • Erase – Erase a chapter. • Divide – Divide a chapter into two. • Combine – Combine two chapters into one. • Move – Change the chapter order. • Preview – Check the chapter content. 3 Select ‘Start’ to begin copying.
DVR-04_HDD_KU.book 63 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 3 Input a name for the selected title. Use this command to erase individual titles from the Copy List. 1 Input Title Name 10/07Wed 3:00PM 2ch LP Select ‘Erase’ from the Copy List menu options. ABC DE F GH I J KLM . , ? ! N O P Q R S T U V WX Y Z ( ) : ; AA A A A AÆ ç E E E E I I I I # CAPS small 2 Use the / (cursor left/right) buttons to select a title from the Copy List to erase, then press ENTER.
DVR-04_HDD_KU.book 64 ページ 2004年4月15日 07 木曜日 午前10時48分 Copying and back-up 3 Use the playback controls to find the place you want to divide the title. 3 Repeat step 2 to combine more titles, or press RETURN to go back to the Copy List menu options.
DVR-04_HDD_KU.book 65 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 3 Use the / (cursor left/right) buttons to select a new position for the title, then press ENTER. The thumbnails in the Copy List reflect the new order. 2 Use the / (cursor left/right) buttons to select a title from the Copy List to edit, then press ENTER.
DVR-04_HDD_KU.book 66 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 Chapter Edit: Divide Chapter Edit: Move You can divide a chapter into as many new chapters as necessary. This command lets you rearrange the chapters within a Copy List title. 1 Use the / / / (cursor buttons) to select the chapter to divide, then press ENTER. 1 Use the / / / (cursor buttons) to select the chapter you want to move, then press ENTER.
DVR-04_HDD_KU.book 67 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 Erase Section (Erase Sec) Using this command you can delete a part of a Copy List title, ideal for cutting out the commercial breaks in a recording made from the TV. 1 Select ‘Erase Sec’ from the Copy List menu options. 2 Use the / (cursor left/right) buttons to select the title you want to erase a section from, then press ENTER.
DVR-04_HDD_KU.book 68 ページ 2004年4月15日 07 木曜日 午前10時48分 Copying and back-up Copying from DVD to HDD* Currently selected DVD title DVD to HDD Copy Original DVD 1 2 3 4 DVD Copy List menu options 1/3 8/11Sun 4:00PM 2ch LP Recording Time 0h32m55s Add Erase Move Preview Erase All HDD 1 2 3 Information for the selected title 4 Copy List titles Copy List Total 1h30m 1/2 Running time of the Copy List Conf List Use the DVD to HDD Copy screen to transfer video on DVD to the hard disk.
DVR-04_HDD_KU.book 69 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 3 Select ‘DVD HDD’. The DVD to HDD Copy screen appears. Recording the Copy List After putting together your Copy List, you’re ready to record it. DVD to HDD Copy Original DVD 1 2 3 1 Select ‘Conf List’ to display the Copy List settings screen. 4 DVD 1/3 Add Erase Move Preview Erase All 2 Use the / (cursor left/right) buttons to select the Recording Mode.
DVR-04_HDD_KU.book 70 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 Erase DVD to HDD Copy List commands Use this command to erase individual titles from the Copy List. Add 1 Use this command to add titles to the Copy List. 2 Use the / (cursor left/right) buttons to select a title from the Copy List to erase, then press ENTER. 1 Select ‘Add’ from the Copy List menu options. Select ‘Erase’ from the Copy List menu options.
DVR-04_HDD_KU.book 71 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 3 Use the / (cursor left/right) buttons to select the insertion point for the title, then press ENTER. 1 2 3 4 DVD 1/3 10/07Wed 3:00PM 2ch LP Recording Time 0h20m10s Add Erase Move Preview Erase All HDD Use this command to erase the Copy List. 1 Select ‘Erase All’ from the Copy List menu options.
DVR-04_HDD_KU.book 72 ページ 2004年4月15日 木曜日 午前10時48分 Copying and back-up 07 5 Press OPEN/CLOSE to open the disc tray and load the disc you want to make a back-up of, then close the disc tray. You can only make back-up copies of finalized Video mode discs. Disc Back-up No Disc. Please load a disc to be backed-up. Start • You can cancel the back-up process by pressing ONE TOUCH COPY for more than one second.
DVR-04_HDD_KU.book 73 ページ 2004年4月15日 木曜日 午前10時48分 Editing 08 Chapter 8 Editing Using the Disc Navigator you can edit video content on unfinalized Video mode and VR mode DVD discs, as well as video content on the internal hard disk drive (HDD). The editing features available in the Disc Navigator depend on whether you are editing video on a Video mode or VR mode DVD, or the HDD, and whether you’re editing Original content, or a Play List.
DVR-04_HDD_KU.
DVR-04_HDD_KU.book 75 ページ 2004年4月15日 木曜日 午前10時48分 Editing 08 • As you highlight different thumbnails, information about the title is shown in the central area of the screen. Press DISPLAY to change the information displayed. • If you are editing a VR mode disc, press PLAYLIST to switch between Original and Play List Disc Navigator screens.
DVR-04_HDD_KU.
DVR-04_HDD_KU.book 77 ページ 2004年4月15日 木曜日 午前10時48分 Editing 08 Title Name (Ttl Name) VR mode Video mode Using the remote key shortcuts to input a name HDD You can give titles new names of up to 64 characters long for VR mode and HDD recordings and 32 characters for Video mode recordings. 1 Select ‘Ttl Name’ from the Disc Navigator menu options. 2 Use the / / / (cursor buttons) to select the title you want to name, then press ENTER to go to the name input screen.
DVR-04_HDD_KU.book 78 ページ 2004年4月15日 08 木曜日 午前10時48分 Editing 2 Use the / / / (cursor buttons) to select the title that contains the chapters you want to edit, then press ENTER. Chapter Edit Original DVD Title 11/04Wed 12:30PM 2ch LP 1 1 2 Erase Divide Combine Preview Undo Chapter 0h03m 3 4 5 6 7 8 9 Back 1/1 Note • When editing VR mode Original content, it may not be possible to erase chapters less than five seconds long.
DVR-04_HDD_KU.book 79 ページ 2004年4月15日 木曜日 午前10時48分 Editing 08 • When recording in Video mode, the recorder automatically puts chapter markers in at regular intervals. It is not possible to add extra chapter markers manually after recording (see also Auto Chapter (Video) on page 102). 4 In the same way, find the end of the section to erase, then (with ‘To’ highlighted) press ENTER.
DVR-04_HDD_KU.book 80 ページ 2004年4月15日 08 木曜日 午前10時48分 Editing Erase All VR mode Divide Video mode HDD HDD This erases all unlocked titles from the disc (see also Lock / Unlock on page 79). 1 Select ‘Erase All’ from the Disc Navigator menu options. 2 Select ‘Yes’ to confirm, or ‘No’ to cancel, then press ENTER. Use this command to divide a title on the HDD into two. Note that once divided, the two new titles cannot be recombined into one again.
DVR-04_HDD_KU.book 81 ページ 2004年4月15日 木曜日 午前10時48分 Editing 08 Change Group (Chg Group) 5 Press RETURN to go back to the Disc Navigator menu options, or select another group to name. HDD Use this command to assign titles to a particular group. 1 Select ‘Chg Group’ from the Disc Navigator menu, then press ENTER. 2 Select the title that you want to put into a different group, then press ENTER. 3 Use the / (cursor up/down) buttons to select a group for the title, then press ENTER.
DVR-04_HDD_KU.book 82 ページ 2004年4月15日 木曜日 午前10時48分 Editing 08 2 Select the title you want to erase, then press ENTER. Disc Navigator Play List DVD 1 2 3 11/04Wed 12:30PM 2ch LP Play Erase Ttl Name Chpt Edit Erase Sec Undo • For discs formatted on a different DVD recorder, you will see only a limited character set. DVD Remain 0h37m(FINE) 4 Erase Title? Yes No 1/1 3 Highlight ‘Yes’ to confirm, or ‘No’ to cancel, then press ENTER.
DVR-04_HDD_KU.book 83 ページ 2004年4月15日 木曜日 午前10時48分 Editing 08 • Divide – Divide a chapter into two or more parts: Select the chapter you want to divide. From the following screen use the playback controls ( , , , , etc.) to find the point at which you want to divide the chapter. With Divide highlighted, press ENTER.
DVR-04_HDD_KU.book 84 ページ 2004年4月15日 08 木曜日 午前10時48分 Editing Create 4 Press ENTER to add the title. The new title appears in the updated Play List. VR mode Use this function to add an Original title to the Play List. When you do this, the whole title is put into the Play List (you can erase bits you don’t need later—see Chapter Edit (Chpt Edit) on page 82). Disc Navigator Play List DVD The title appears in the Play List complete with the chapter markers that appear in the Original.
DVR-04_HDD_KU.book 85 ページ 2004年4月15日 木曜日 午前10時48分 Editing 08 4 Press RETURN to go back to the Disc Navigator menu options, or select another title to move. After pressing ENTER, the new, updated Play List is displayed. Divide Disc Navigator Play List DVD VR mode 1 2 3 Use this command to split a title up into two new titles. 1 Select ‘Divide’ from the Disc Navigator Play List menu options. 2 Select the title that you want to divide, then press ENTER.
DVR-04_HDD_KU.book 86 ページ 2004年4月15日 09 木曜日 午前10時48分 Disc History Chapter 9 Disc History VR mode Video mode The Disc History screen lets you see how much recording space remains on the last 30 recordable DVD discs loaded. It also displays information such as disc name, the first three title names, number of titles recorded, recording mode and the lock status of the disc.
DVR-04_HDD_KU.book 87 ページ 2004年4月15日 木曜日 午前10時48分 The PhotoViewer 010 Chapter 10 The PhotoViewer From the PhotoViewer you can view JPEG photos and picture files stored on a CD-ROM/R/RW on your TV. Currently selected thumbnail PhotoViewer File Chair No. 2 Date/Time 5/12/2003 10:00AM Currently selected folder in folder list Pages in folder list 01. 12/12 TUE 02. 12/13 WED 03. 12/14 THU 04. 12/15 FRI 05. 12/16 SAT 06. 12/17 SUN 07. 12/18 MON 08.
DVR-04_HDD_KU.book 88 ページ 2004年4月15日 010 木曜日 午前10時48分 The PhotoViewer Note • You can press HOME MENU to exit the PhotoViewer screen while the recorder is reloading images. (If you enter the PhotoViewer again, it will resume reloading.) Zooming the screen During a slideshow you can zoom in to enlarge a portion of the picture by a factor of two or four. You can also move the area of the picture displayed. 1 During a slideshow, use the CHANNEL + button to zoom the picture.
DVR-04_HDD_KU.book 89 ページ 2004年4月15日 木曜日 午前10時48分 The Disc Setup menu 11 Chapter 11 The Disc Setup menu • 2 Input a name for the disc up to 64 characters long for a VR mode disc, or 32 for a Video mode disc. Input Disc Name DISC7 Press HOME MENU and select ‘Disc Setup’. ABC DE F GH I J KLM .
DVR-04_HDD_KU.book 90 ページ 2004年4月15日 木曜日 午前10時48分 The Disc Setup menu 11 Initialize settings Finalize settings DVD-RW You can initialize a DVD-RW disc for either VR mode recording or Video mode recording. The first time you load a new DVD-RW disc, it will be automatically initialized for recording according to the DVD-RW Auto Init. setting in the Initial Setup menu (see page 102).
DVR-04_HDD_KU.book 91 ページ 2004年4月15日 木曜日 午前10時48分 The Video/Audio Adjust menu 12 Chapter 12 The Video/Audio Adjust menu Using the Video/Audio Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc playback, and for recording. 4 Press ENTER to select the preset.
DVR-04_HDD_KU.book 92 ページ 2004年4月15日 木曜日 午前10時48分 The Video/Audio Adjust menu 12 5 When you have all the settings as you want them, press HOME MENU to exit. You can now use the preset for any other input or the built-in TV tuner. Tip • To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust. Creating your own set There are three user presets in which you can save your own set of picture quality settings for disc playback.
DVR-04_HDD_KU.book 93 ページ 2004年4月15日 木曜日 The Video/Audio Adjust menu 午前10時48分 12 4 Use the / (cursor left/right) buttons to adjust the currently selected picture quality setting. 5 When you have all the settings as you want them, press HOME MENU to exit. Tip • To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust.
DVR-04_HDD_KU.book 94 ページ 2004年4月15日 木曜日 午前10時48分 The Initial Setup menu 13 Chapter 13 The Initial Setup menu Set ‘Clock Set CH‘ to the channel preset number that broadcasts a clock signal, then move the cursor down to ‘Start’ and press ENTER. Using the Initial Setup menu The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on. Initial Setup • Press HOME MENU and select ‘Initial Setup’.
DVR-04_HDD_KU.book 95 ページ 2004年4月15日 木曜日 午前10時48分 The Initial Setup menu On Screen Display After selecting a new recorder ID, you have to confirm the change by selecting Yes or No (use the / (cursor left/right) buttons), then pressing ENTER.
DVR-04_HDD_KU.book 96 ページ 2004年4月15日 木曜日 午前10時48分 The Initial Setup menu 13 After automatic tuning, a summary channel mapping screen is displayed.
DVR-04_HDD_KU.book 97 ページ 2004年4月15日 木曜日 午前10時48分 The Initial Setup menu 13 If your TV is compatible with progressive-scan component video, set this Progressive for the highest quality picture. If your TV is not compatible with progressive-scan video, leave it set to Interlace. DVR-520H only: When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder whether the audio is stereo or dual mono. This has priority over the setting you make here.
DVR-04_HDD_KU.book 98 ページ 2004年4月15日 13 木曜日 午前10時48分 The Initial Setup menu Input Level (L1 / L2 / L3) If your AV amp/receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital PCM. Check the manual that came with the connected component if you’re unsure whether it is Dolby Digital compatible.
DVR-04_HDD_KU.book 99 ページ 2004年4月15日 木曜日 午前10時48分 The Initial Setup menu If your AV amp/receiver (or other connected component) is compatible with high sampling rate audio (88.2 / 96 kHz), set to 96kHz, otherwise set to 96kHz 48kHz. Check the manual that came with the connected component if you’re unsure whether it is compatible with high sampling rate audio. MPEG Out You only need to make this setting if you connected this recorder to an AV amp/receiver (or other component) using the digital output.
DVR-04_HDD_KU.book 100 ページ 2004年4月15日 13 木曜日 午前10時48分 The Initial Setup menu When set to On, the recorder selects the default audio language on a DVD disc (French dialog for a French movie, for example), and displays subtitles in your preferred subtitle language only if that is set to something different. In other words, movies in your native language won’t have any subtitles, while foreign language movies will be shown with subtitles.
DVR-04_HDD_KU.book 101 ページ 2004年4月15日 木曜日 午前10時48分 The Initial Setup menu 13 Optimized Rec Recording settings • Default setting: Off Initial Setup Manual Recording Basic Tuner Video Out Audio In Audio Out Language Recording Playback • Default setting: Off Initial Setup Basic Tuner Video Out Audio In Audio Out Language Recording Playback Manual Recording Optimized Rec Navi Mark Auto Chapter (Video) Frame Accurate DVD-RW Auto Init.
DVR-04_HDD_KU.book 102 ページ 2004年4月15日 13 木曜日 午前10時48分 The Initial Setup menu Auto Chapter (Video) Playback settings • Default setting: 10 minutes Initial Setup Basic Tuner Video Out Audio In Audio Out Language Recording Playback Manual Recording Optimized Rec Navi Mark Auto Chapter (Video) Frame Accurate DVD-RW Auto Init.
DVR-04_HDD_KU.book 103 ページ 2004年4月15日 木曜日 午前10時48分 The Initial Setup menu Seamless Playback VR mode 13 Parental Lock : Set Password HDD • Default setting: Off During playback of a VR mode Play List, you may notice momentary interruption in the picture at edited points. The Seamless Playback feature lets you trade-off accuracy of the edit points for more seamless playback. When switched On, you may notice that the edit points are a few frames earlier or later than you set.
DVR-04_HDD_KU.book 104 ページ 2004年4月15日 木曜日 午前10時48分 The Initial Setup menu 13 3 Press ENTER. Parental Lock : Country Code 4 Enter a new password. You may also want to refer to the Country code list on page 113.
DVR-04_HDD_KU.book 105 ページ 2004年4月15日 木曜日 The Initial Setup menu 午前10時48分 13 Angle Indicator • Default setting: On Initial Setup Basic Tuner Video Out Audio In Audio Out Language Recording Playback TV Screen Size Still Picture Seamless Playback Parental Lock Angle Indicator On Off On the default setting, when playing a DVD-Video disc that features multi-angle scenes, an icon appears onscreen during the parts of the disc where angle switching is available.
DVR-04_HDD_KU.book 106 ページ 2004年4月15日 木曜日 午前10時48分 Additional information 14 Chapter 14 Additional information Maker Code Resetting the recorder Aiwa 38 If you need to, you can reset the recorder to all its factory settings. Funai 36 1 GE 11, 28 General 34 Goldstar 10, 23 Grandiente 30 Hitachi 06, 24, 25, 32 Magnavox 12, 29 Mitsubishi 09 NEC 37 Panasonic 08, 22, 41 1 Press and hold down the CLEAR button, then enter the maker code for your TV.
DVR-04_HDD_KU.book 107 ページ 2004年4月15日 木曜日 午前10時48分 Additional information 14 Screen sizes and disc formats When viewing on a standard TV or monitor Screen format of disc Setting Appearance 16:9 4:3 (Letter Box) The program is shown in widescreen with black bars at the top and bottom of the screen. 4:3 (Pan & Scan) The sides of the program are cropped so that the picture fills the whole screen. 16:9 The program appears squashed. Set to either 4:3 (Letter Box) or 4:3 (Pan & Scan).
DVR-04_HDD_KU.book 108 ページ 2004年4月15日 14 木曜日 午前10時48分 Additional information Troubleshooting Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this component, please check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
DVR-04_HDD_KU.book 109 ページ 2004年4月15日 木曜日 午前10時48分 Additional information Problem 14 Remedy Screen is stretched vertically or hori- • Make sure that the TV Screen Size setting (page 102) is correct for the kind of TV zontally you have (see also page 107). • If you have a widescreen TV, check its aspect ratio settings. • This recorder’s input switches into wide mode automatically according to the input signal.
DVR-04_HDD_KU.book 110 ページ 2004年4月15日 14 木曜日 午前10時48分 Additional information Problem Remedy Can’t use One Touch Copy (DVD to HDD) • Make sure that there is space available on the HDD and that there are fewer than 250 titles on the HDD. • One Touch Copy doesn’t work if the recorder is already recording to the HDD.
DVR-04_HDD_KU.book 111 ページ 2004年4月15日 木曜日 午前10時48分 Additional information • Can I copy a copy-once protected program from a subscription satellite or cable channel to a DVD from the HDD? Yes, you can use high-speed copy to copy to a VR mode DVD-RW disc. You can also divide the recording on the HDD into a number of smaller titles if the whole recording won’t fit on to one disc. See also Copying from HDD to DVD* on page 60.
DVR-04_HDD_KU.book 112 ページ 2004年4月15日 14 木曜日 午前10時48分 Additional information Manual recording modes The table below shows the approximate recording times for all of the 32 manual recording modes, as well as the standard recording mode equivalents. Levels separated by a bold line show where there is a noticeable change in picture quality. The divisions for HDD recording are the same as those for Video mode.
DVR-04_HDD_KU.
DVR-04_HDD_KU.book 114 ページ 2004年4月15日 14 木曜日 午前10時48分 Additional information On-screen displays and recorder displays The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning. 114 En Message Explanation/Action • Initializing disc. Please wait a moment. When you load a blank DVD-RW disc, the recorder automatically initializes it. • Incompatible region number.
DVR-04_HDD_KU.book 115 ページ 2004年4月15日 木曜日 午前10時48分 Additional information 14 Message Explanation/Action • There is no DV input or the input signal is unrecordable. • Cannot preview because there is no DV input or the input signal is unrecordable. No signal was detected at the DV input/output jack. This may appear if a blank section of DV tape is playing in the connected camcorder. (Applicable to DVR-520H only.
DVR-04_HDD_KU.book 116 ページ 2004年4月15日 14 木曜日 午前10時48分 Additional information Hints on installation Glossary We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it: Analog audio Use in a well-ventilated room. An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio.
DVR-04_HDD_KU.book 117 ページ 2004年4月15日 木曜日 午前10時48分 Additional information DTS 14 MPEG video The video format used for Video CDs and DVDs. Video CD uses the older MPEG-1 standard, while DVD uses the newer and much better quality MPEG-2 standard. DTS stands for Digital Theater System. DTS is a surround system different from Dolby Digital that has become a popular surround sound format for movies. “DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Systems, Inc.
DVR-04_HDD_KU.book 118 ページ 2004年4月15日 14 木曜日 午前10時48分 Additional information Sampling frequency The rate at which sound is measured to be turned into digital audio data. The higher the rate, the better the sound quality, but the more digital information is generated. Standard CD audio has a sampling frequency of 44.1kHz, which means 44,100 samples (measurements) per second. See also Digital audio. Title A collection of chapters on a the HDD/DVD disc. See also Chapter.
DVR-04_HDD_KU.book 119 ページ 2004年4月15日 木曜日 午前10時48分 Additional information 14 Timer Specifications Programs . . . . . . . . . . . . . . . . . . . . . . 1 month/32 programs Clock . . . . . . . . . . . . . . . Quartz lock (12-hour digital display) Power off memory . . . .Approx. 5 years (after manufacture) General System . . . . . . . . . . . . . . . . . . HDD, DVD-Video, DVD-R/RW, Video-CD, CD, CD-R/RW (WMA, MP3, JPEG, CD-DA) Power requirements . . . . . . . . . . . . . . . . . . . . . .
DVR-04_HDD_KU.
DVR-04_HDD_KU.book 124 ページ 2004年4月15日 木曜日 午前10時48分 Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below. 800–421–1404 Please do not ship your product to Pioneer without first calling the Customer Support Division at the above listed number for assistance. Pioneer Electronics (USA) Inc.