Owner manual

PRESETTING STATIONS

Manual Station Name Memory

Using up to 4 characters, you can store a nanne of your choice for

preset FM/AM broadcast stations 1 to 30. Even if PS data is already

received using RDS, an FM or AM broadcast can still be mennorized.

In this case, the nnemorized name takes priority over the PS data

name.

1. Turn the 6 STANDBY/ON switch ON.

2. Select the desired broadcast station with the

CLASS button and STATION CALL button.

3. Press the CHARACTER/SEARCH button once to

select the Station name input mode.

"INPUT” lights in the display, and the mode switches to manual

memory.

4. While "INPUT" is displayed, turn the TUNING

knob clockwise or counterclockwise to input a

desired character.

Enter characters in the following way;

©The first character in the display changes while you turn the

TUNING knob. Select a character as desired, (see page 17)

©When you have selected your desired character, press the

MEMORY button.

This enters the first character and awaits input of the next

character for memorization.

Repeat this procedure until all four characters have been entered.

NOTES:

# If you perform no operations within about 5 seconds after

"INPUT" is displayed, the display returns to frequency indications.

0 Even if the station name contains less than four characters,always

input a space and repeat steps 4 (D and 4 (g).

0 When you want to change a memorized station name, after

selecting a desired broadcast station, register the new name using

steps 2 to 4.

For greater convenience, record memorized station names in the

STATION CALL button "memo" on page 17.

When erasing a memorized station name, use the

following procedure.

counterclockwise to display a space.

(The space lies between and "A".)

• 11