Quick Start Guide

Basic Hardware buttons
NAVIGATION AV SYSTEM
Quick Start Guide
This guide is intended to guide you through
the basic functions of this navigation system.
For details, please refer to the operation
manual.
Searching for your destination
by address
1 Display “Destination
Menu” and touch Address.
2 Input the information that
you want to set as the des-
tination.
Touching the one of options.
After narrowing down your desti-
nation, “Location confirmation
screen” will appear.
3 Touch OK.
After searching for the destina-
tion, the “Route confirmation
screen” appears.
4 Touch OK.
This navigation systems gives
you route guidance visually and
by voice.
AVIC-F10BT
Switching the screen
Published by Pioneer Corporation.
Copyright © 2009 by Pioneer Corporation.
All rights reserved. Printed in Thailand
<KYTZX> <09F00000> <CRB3045-A/N> EU
Top Menu
("Shortcut" menu)
Navigation Menu
Touch Destination on the “Top Menu”.
41
6
2 3
1 VOICE button
Enables you to start the voice
operation.
2 VOL (+/–) button
Adjusts the AV (Audio and Video)
source volume.
3 HOME button
Press to display “Top Menu”.
4 MODE button
Press to switch between the
map screen and the AV opera-
tion screen.
5 TRK (◄/►) button
6 OPEN CLOSE button
Press to display the control
panel of the LCD panel.
1 Search by address
2 Shortcut key for calculating
the route home
3 Search for stores, restau-
rants, and other businesses
in the points of interest data-
base
4 Searching for POIs by using
the data on external storage
devices (SD)
5 Selecting your stored loca-
tion
6 Returns the previous screen
7 Select a previously routed
destination
8 Searching for a location by
coordinates
9 Cancelling your current
route
a Viewing the current route
information
b Using traffic information
Map screen
"AV Source" menu"Destination" menu "Phone" menu
AV screen
5 7 8 a9 b
Top Menu
("Classic" menu)
1 2 3 4 5 6