Operation Manual

Displaying the information
screen
1 Press the HOME button to display the
“Top Menu” screen.
2 Touch
.
The “Information” screen appears.
3 Touch the item you want to configure.
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and vehicle.
Please also check whether they are connected
in the correct positions.
1 Display the “Information” screen.
= For details, refer to Displaying the informa-
tion screen on page 123.
2 Touch [system settings].
The “System information menu” screen ap-
pears.
3 Touch [Connection Status].
2
3
4
1
5
7
8
9
6
a
1 Speed Pulse
The Speed Pulse value detected by the navi-
gation system is shown. “0” is shown while
the vehicle is stationary.
2 Illumination
When the headlights or small lamps of a ve-
hicle are on, “On” is displayed. When the
small lamps of a vehicle are off, “Off” is dis-
played. (If the orange/white lead is not con-
nected, “Off” appears.)
3 Back Signal
When the gear stick is shifted to “R”, the
signal switches to “High” or “Low”. (One of
these is displayed depending on the vehi-
cle.)
4 Handbrake
When the handbrake is applied, “On” is dis-
played. When the handbrake is released,
“Off” is displayed.
5 Vehicle Bus
When the optional Vehicle Bus adapter is
connected, “Connected” is displayed. If not
connected, “–” is displayed.
6 GPS Antenna
Indicates the connection status of the GPS
aerial, the reception sensitivity, and from
how many satellites the signal is received.
Engb
123
Chapter
26
Customising preferences
Customising preferences