Operation Manual

Colour
Signal com-
munication
Used in posi-
tioning
Orange Yes Yes
Yellow Yes No
p When the GPS aerial is connected to
this navigation system, “OK” is dis-
played.
When the GPS aerial is not connected to
this navigation system, “NOK” is dis-
played.
p If reception is poor, please change the
installation position of the GPS aerial.
7 Installation
The installation position of the navigation
system is shown.
If installed correctly, “OK” appears. Indi-
cates whether the installation position of
the navigation system is correct or not.
When the navigation system is installed at
an extreme angle exceeding the limitation
of the installing angle, “NG” will be dis-
played. When the angle of the navigation
system has been changed, “NG” will be dis-
played.
8 Bluetooth 1
The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.
9 Bluetooth 2
The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.
a Bluetooth 3
The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.
Checking sensor learning
status and driving status
p The navigation system can automatically
use its sensor memor y based on the outer
dimensions of the tyres.
1 Display the “Information” screen.
= For details, refer to Displaying the informa-
tion screen on page 123.
2 Touch [system settings].
The “System information menu” screen ap-
pears.
3 Touch [3D Calibration Status].
The “3D Calibration Status” screen appears.
2
3
4
1
5
6
1 Learning
Indicates the current driving mode.
2 Distance
Indicates driving distance.
3 Acceleration or deceleration/Rotational
speed
Indicates the acceleration or deceleration
velocity of your vehicle. Also, the rotational
speed when your vehicle turns to the left or
right is shown.
4 Inclination
Indicates the incline of the street that you
are currently on.
5 Speed Pulse
Indicates the total number of speed pulses.
6 Degree of learning
Sensor learning situations for distance
(Distance), right turn (Right Turn), left turn
(Left Turn) and 3D detection (3D Detec-
tion) are indicated by the length of bars.
Engb
124
Chapter
26
Customising preferences