Operation Manual

4 Touch the item you want to set.
! Use (default):
Calculates a route that may include ferries
in a standard criteria.
! Avoid:
Calculates a route that avoids ferries.
Setting the route calculation by
learning route
The system learns the travel history of your ve-
hicle for each road.
This setting controls whether or not the travel
history should be taken into account.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [Learning Route].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Calculates a route with the travel history
taken into account.
! Off:
Calculates a route without the travel history
taken into account.
Setting the route calculation
allowing for time restrictions
This setting controls whether streets or
bridges that have traffic restrictions during a
certain time should be taken into account.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly.
= For details, refer to Setting the time difference
on page 136.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [Time restrictions].
The setting screen appears.
4 Touch the item you want to set.
! On (default):
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
! Off:
Calculates a route while ignoring traffic re-
strictions.
p If you want to set your route to avoid raised
draw bridges, select “On”.
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if “On” is selected.
Setting the use of motorways
You can predefine the use of motorways when
calculating a route.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
2 Touch [Guide].
3 Touch [Motorway].
The setting screen appears.
4 Touch the item you want to set.
! Use (default):
Calculates a route that may include motor-
ways in a standard criteria.
! Avoid:
Calculates a route that avoids motorways.
Setting to select your route
automatically using the route
alternatives function
You can set in advance a new route and the
current route you select when the navigation
system recommends a new alternative route
automatically and no selection is made.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the screen for
navigation function settings on page 128.
Engb
132
Chapter
26
Customising preferences