Operation Manual

3 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 16.
4 Display the “System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 135.
5 Touch [Splash Screen].
The “Select Splash Screen” screen appears.
6 Touch [Load from SD].
A message confirming whether to start load-
ing files appears.
! Yes:
Starts importing the files into the navigation
system.
! No:
Returns you to the previous screen.
The “Select Splash Screen” screen appears.
7 Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
8 Touch [OK].
The image is set as the splash screen, and the
map screen returns.
p Images imported from the SD memory card
are added to the list on “Select Splash
Screen”.
Adjusting the response
positions of the touch panel
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen.
p Do not use sharp pointed tools such as a
ballpoint or mechanical pen, which could
damage the screen.
1 Press and hold the MODE button.
The picture adjustment screen appears.
2 Press and hold the MODE button while
the picture adjustment screen is still dis-
played.
The touch panel adjustment screen appears.
3 Touch two corner of the screen along
the allows, and then touch two centre of +
mark at the same time twice.
4 Press the MODE button.
The adjustment results are saved.
5 Press the MODE button once again.
Proceed to the 16-point adjustment.
6 Gently touch the centre of the + mark
displayed on the screen.
The target indicates the order.
After you touch all marks, the adjusted posi-
tion data is saved.
p Do not turn off the engine while saving the
adjusted position data.
# If you press the MODE button, the previous
adjustment position returns.
# If you press and hold the MODE button, the
adjustment is cancelled.
Setting the illumination colour
The illumination colour can be selected from 5
different colours. Furthermore, the illumina-
tion can be switched between these 5 colours
in order.
Engb
137
Chapter
26
Customising preferences
Customising preferences