Operation Manual

Setting video input 2 (AV2)
You can use outside video equipment such as
portable players connected to this product
with this setting.
p This setting applies to RCA inputs
(AUDIO INPUT and VIDEO INPUT) on the
back of the system.
1 Display the “Setting according to
source” screen.
= For details, refer to Displaying the screen for
AV system settings on page 139.
2 Touch [AV Input].
3 Touch [AV2 Input].
4 Touch [On].
The connected component is enabled.
# If you touch [Off], the setting is turned off.
Changing the screen size of SD/
USB video
Changes the screen size of video. If a video file
is played, you can select the display mode be-
tween normal and full screen.
1 Display the “Setting according to
source” screen.
= For details, refer to Displaying the screen for
AV system settings on page 139.
2 Touch [SD/USB settings].
3 Touch [SD video output settings] or
[USB video output settings].
4 Touch [Full] or [Normal].
! Full (default):
A picture is enlarged in four directions with-
out keeping the aspect ratio and displays to
the full extent of a screen.
! Normal:
A picture is displayed fitting to the long side
of the screen while keeping the aspect
ratio.
Displaying your DivX VOD
registration code
If you want to play DivX VOD (video on de-
mand) content on this navigation system, you
must first register the unit with your DivX VOD
content provider. You do this by generating a
DivX VOD registration code, which you submit
to your provider.
p This feature is available when the selected
source is CD, ROM, DivX,orDVD-V.
1 Display the “Setting according to
source” screen.
= For details, refer to Displaying the screen for
AV system settings on page 139.
2 Touch [DivX® VOD].
A screen where you can choose to display a re-
gistration code or deregistration code is dis-
played.
p If a registration code has already been acti-
vated, it cannot be displayed.
3 Touch [Registration Code].
Your 10-digit registration code is displayed.
p Make a note of the code as you will need it
when you register with a DivX VOD provider.
Displaying your DivX VOD
deregistration code
A registration code registered with a deregis-
tration code can be deleted.
p This feature is available when the selected
source is CD, ROM, DivX,orDVD-V.
1 Display the “Setting according to
source” screen.
= For details, refer to Displaying the screen for
AV system settings on page 139.
2 Touch [DivX® VOD].
A screen where you can choose to display a re-
gistration code or deregistration code is dis-
played.
Engb
140
Chapter
26
Customising preferences