Operation Manual

Equaliser curve
Natural is a curve in which low- and high-pitched
sounds are slightly boosted.
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat is a flat curve in which nothing is boosted.
Custom1 is an adjusted equaliser curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2 is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is applied to all
AV sources.
p When “Flat” is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between
“Flat” and a set equaliser curve.
p You cannot select “Custom1” and “Cus-
tom2” when “Auto EQ” is “On”.
= For details, refer to Using the auto-ad-
justed equaliser on page 144.
1 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 141.
2 Touch [EQ Menu].
3 Touch the equaliser you want.
p If Auto EQ has been set to “On”, an image
corresponding to each equaliser curve you
selected appears.
= For details of the operations, refer to Adjust-
ing the equaliser curve automatically (Auto
EQ) on page 146.
Customising the equaliser curves
You can adjust the currently selected equaliser
curve setting as desired. Adjustments can be
made with a 8-band graphic equaliser.
p This function is not available when “Auto
EQ” is “On”.
= For details, refer to Using the auto-ad-
justed equaliser on page 144.
The difference between “Custom1” and
“Custom2”
! A separate “Custom1” curve can be cre-
ated for each source. If you make adjust-
ments when a curve “S.Bass (Super Bass)”,
“Powerful”, “Natural”, “Vocal ”, “Flat”,or
“Custom1” is selected, the equaliser curve
settings will be memorised in “Custom1”.
Engb
143
Chapter
26
Customising preferences
Customising preferences