Operation Manual

Selecting the video for rear
display
You can choose either to show the same
image as the front screen or to show the se-
lected source on the rear display.
1 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Touch on the left edge of the
screen.
p If the source icon to be displayed on the
rear display does not appear on the AV op-
eration screen, turn on the setting of [Rear
Monitor Output].
= For details, refer to Displaying the icon
for setting the rear display output on
page 139.
p The appearance of this key changes accord-
ing to the current setting.
p While the tuner is receiving an emergency
announcement, traffic announcement, or
news programme, the current setting can-
not be changed.
3 Touch the source you want to show on
the rear display.
The source you can select is as follows.
! Mirror AV:
The video on the front screen of the naviga-
tion unit is output to the rear display.
! Disc:
The video and sound of the DVDs are out-
put to the rear display.
! iPod:
The video and sound of the iPod are output
to the rear display.
! AV1:
The video and sound of AV1 are output to
the rear display.
! AV2:
The video and sound of AV2 are output to
the rear display.
! Off:
Nothing is output to the rear display.
p Touching
closes the pop-up screen.
p When “Mirror AV” is selected, the following
restrictions are applied to rear display.
— When selecting “Rear View” in the map
display, nothing is displayed.
— All sounds cannot be output for the rear
display.
— When playing back video files on the ex-
ternal storage device (USB, SD), the
video image is not output.
— The picture may have noise if the iPod
video is output to the rear display.
p When “Disc” is selected, the following re-
striction is applied to rear display.
— When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, only the
sound is output.
p When “iPod” is selected, the following re-
striction is applied to rear display.
— The picture may have noise if the iPod
video is output to the rear display.
p When “AV1” or “AV2” is selected, the fol-
lowing restrictions are applied to the rear
display.
— The video image and sound are output
only when “AV1” or “AV2” has both
video and sound.
— The video image and sound are output
only when the corresponding settings
on “AV1 Input” or “AV2 Input” are
“On”.
Replicating the settings
You can import settings you have made on the
utility programme NavGate FEEDS which is
available separately to the navigation system.
p NavGate FEEDS is available on our website.
1 Use NavGate FEEDS to replicate the set-
tings and store them on an SD memory
card.
Engb
151
Chapter
26
Customising preferences
Customising preferences