English CD RDS RECEIVER AUTORADIO CD RDS REPRODUCTOR DE CD CON RECEPTOR RDS Français Español FH-X820BS FH-X720BT FH-X721BT FH-X520UI Owner’s Manual Mode d’emploi Manual de instrucciones Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Important (Numéro de série) Le numéro de série se trouve au bas de cet appareil.
Table of Contents Before You Start....................................................................................... 3 Getting Started........................................................................................ 4 Radio.......................................................................................................... 7 CD/USB/iPod/AUX................................................................................... 8 Bluetooth..........................................................
Before You Start FCC ID: AJDK071 MODEL NO.: FH-X820BS/X720BT/X721BT IC: 775E-K071 This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
After-sales service for Pioneer products Please contact the dealer, distributor from where you purchased this unit or the authorized PIONEER Service Station for after-sales service or any other information. In case the necessary information is not available, please contact the companies listed below: Please do not ship your unit to the companies at the addresses listed below for repair without contacting them in advance. U.S.A. Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O.
FH-X520UI Frequently used operations Display window DISP (display) The available buttons vary depending on the unit. Operation Purpose SRC (source)/OFF M.C. (multi-control) dial Remote Control VOLUME +/– MUTE / * SRC (source) * DISP (display) Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. Press SRC to turn on the power. Press and hold SRC to turn off the power. Adjust the volume Turn the M.C. dial. Press VOLUME + or –. Press MUTE to mute the unit.
Indication Description Setting the clock (CLOCK SET) Appears when the iPod control function is set (page 9). Appears when a Bluetooth connection is made (page 10). (Only for Bluetooth-compatible models.) When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display. 1 Preparing the remote control Remove the insulation sheet before use. How to replace the battery 2 3 4 Press the M.C. dial. The setup menu disappears after 30 seconds of no operation.
TIP Menu Item Description REAR-SP Select when there is a full-range speaker connected to the rear speaker output leads. [FUL] Select when there is a subwoofer connected directly to the rear speaker output leads without any auxiliary amplifier. SP-P/O MODE Select when there is a full-range speaker connected to the rear speaker output leads and there is a subwoofer connected to the RCA output. [REAR/SUB.W] [SUB.W/SUB.
MTP connection CD/USB/iPod/AUX A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device and the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is not compatible with WAV file formats, and cannot be used with the MIXTRAX function. Playing back Disconnect headphones from the device before connecting it to the unit.
NOTE Operation Alphabetical search (iPod only) 1 Press to display the list. 2 Turn the M.C. dial to select the desired category list, then press to enter the alphabetical search mode. (Turning the M.C. dial twice also enters the alphabetical search mode.) 3 Turn the M.C. dial to select a letter, then press to display the alphabetical list. To cancel alphabetical search, press / DIMMER. Repeat play Press 6/ . Random/shuffle play Press 5/ .
Bluetooth (Only for FH-X820BS/X720BT/X721BT) Menu Item Description DEL DEVICE Delete the device information. [DELETE YES], [DELETE NO] ADD DEVICE Register a new device. A.CONN Select [ON] to connect to a Bluetooth device automatically. Bluetooth connection Important If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly. 1 2 3 4 5 6 Turn on the Bluetooth function of the device. Press and hold to display the connection menu.
2 3 Turn the M.C. dial to select [MISSED], [DIALED], [RECEIVED] or [PHONE BOOK], then press to confirm. The phone number list appears. Turn the M.C. dial to select a name or phone number, then press to confirm. The phone call starts. 2 Press the M.C. dial and then talk into the microphone to input voice commands. To exit the voice recognition mode, press BAND/ . NOTE For details on the voice recognition features, refer to the manual supplied with your iPhone.
• The sound of the Bluetooth audio player will be muted when the phone is in use. • When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone automatically. • Depending on the type of Bluetooth audio player you have connected to this unit, operation and information displayed may vary based on availability and functionality. 1 2 3 For iPhone users This function is compatible with iPhones and iPod touches installed with iOS 5.0 or later.
Pandora® Listening to Pandora Update the firmware of the Pandora application to the latest version before use. The Bluetooth connection is available for all units except FH-X520UI. 1 2 3 4 5 6 7 Connect this unit with the mobile device. • iPhone via USB (page 8) • Android device via Bluetooth (page 10) Press the M.C. dial to display the main menu. Turn the M.C. dial to select [SYSTEM], then press to confirm. Turn the M.C. dial to select [APP CONN.SET], then press to confirm. Turn the M.C.
NOTE TuneStart is compatible with SXV200 or later tuner models. Not compatible with SXV100. TuneScan™ Scan through short previews of songs you may have missed on music channels stored on the current band of presets. Each song in the current channel plays for six seconds at a time. For details, refer to TUNE SCAN (scanning the songs) on page 16. NOTE TuneScan is compatible with SXV200 or later tuner models. Not compatible with SXV100.
NOTE NOTE Press DISP to change the display information between “Channel Name”, “Artist Name”, “Song Title”, “Content Info” and “Channel Number”. The Bluetooth-related menu items in the following tables are not available for FH-X520UI. FUNCTION settings Scan options Operation Selecting the channel or song playing Press the M.C. dial. The menu items vary according to the source. is only available for FH-X820BS. Switching to the next/previous song during Press TuneScan or .
Menu Item Description Menu Item [SUPER BASS], [POWERFUL], Select or customize the equalizer curve. [NATURAL], [VOCAL], [CUSTOM1], [CUSTOM1] can be set separately for each source. [CUSTOM2], [FLAT] However, each of the below combinations are set to the same setting automatically. Select an equalizer band and • USB, iPod, PANDORA (iPhone), and APP level for further customizing. (iPhone) Equalizer band: [80HZ], [250HZ], • BT AUDIO, PANDORA (Android), and APP [800HZ], [2.
*3 Not available when [FUL] is selected in [REAR-SP] in the INITIAL settings (page 7). *4 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 7). *5 Not available when [OFF] is selected in [SUB.W]. ILLUMINATION settings Menu Item SYSTEM settings [KEY COLOR], [DISP COLOR], [BOTH COLOR] Description CLOCK SET Set the clock (page 6). 12H/24H [12H], [24H] Select the time notation. INFO DISPLAY Display the item on the sub information display.
Menu Item Description ILLUMI FX [ON], [OFF] The illumination effect can be seen when; – there is an incoming call – you are on a phone call – a CD is inserted/ejected The illumination effect will activate when the ACC power is turned on/off regardless of this setting. Description SHORT PLAYBCK [1.0 MIN], [1.5 MIN], [2.0 MIN], [2.5 MIN], [3.0 MIN], [OFF] Select the length of the playback time. FLASH AREA [KEY/DISPLAY], [KEY], [OFF] Select the area for the illumination effect.
Connections/Installation Connections Ground wire POWER AMP Other devices Metal parts of (Another electronic device car’s body in the car) *1 Not supplied for this unit Important • When installing this unit in a vehicle without an ACC (accessory) position on the ignition switch, failure to connect the red cable to the terminal that detects operation of the ignition key may result in battery drain. ACC position No ACC position • Use this unit with a 12-volt battery and negative grounding only.
Perform these connections when using a subwoofer without the optional amplifier. To power cord input Left Right Front speaker Rear speaker White White/black Gray Gray/black Green Green/black Violet Violet/black Black (chassis ground) 20 En Connect to a clean, paint-free metal location. Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by the ignition switch (12 V DC).
DIN Rear-mount 1 Determine the appropriate position To install on the sun visor 1 Fit the microphone lead into the where the holes on the bracket and the side of the unit match. 2 Install the microphone on the rear side of the steering column. groove. Microphone lead Groove English 2 Tighten the screws on each side. 2 Install the microphone clip on the sun visor. Lowering the sun visor reduces the voice recognition rate.
Additional Information Troubleshooting The display automatically returns to the normal display. → No operations have been made for about 30 seconds. – Perform an operation. The repeat play range changes unexpectedly. → Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. – Select the repeat play range again. A subfolder is not played back. → Subfolders cannot be played when [FLD] (folder repeat) is selected.
ERROR-23 → USB device was not formatted properly. – Format the USB device with FAT12, FAT16 or FAT32. STOP → There are no songs in the current list. – Select a list that contains songs. NOT FOUND → No related songs. – Transfer songs to the iPod. Bluetooth device ERROR-10 → The power failed for the Bluetooth module of the unit. – Turn the ignition switch OFF and back to ACC or ON. Pandora ERROR-19 → Communication failed. – Disconnect the cable from the device.
– Move the SiriusXM antenna away from any obstructions. SUBSCRIPTION UPDATED → This unit has detected a change in your SiriusXM subscription status. – Press any key to clear the message. CH UNAVAIL → The channel that you have requested is not available. – Check the SiriusXM channel lineup. CHAN UNSUB → The channel that you have requested is not included in your SiriusXM subscription package. – Check the content of your SiriusXM subscription package.
Disc • Regardless of the length of the blank section between the songs from the original recording, compressed audio discs play with a short pause between songs. Playable folders Playable files File system Multi-session playback Packet write data transfer Up to eight tiers (A practical hierarchy is less than two tiers.
Specifications General Power source: 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system: Negative type Maximum current consumption: 10.0 A Dimensions (W × H × D): D Chassis: 178 mm × 100 mm × 165 mm (7 in. × 3-7/8 in. × 6-1/2 in.) Nose: 170 mm × 96 mm × 18 mm (63/4 in. × 3-3/4 in. × 3/4 in.) Weight: 1.2 kg (2.
© 2014 PIONEER CORPORATION. All rights reserved. © 2014 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés.
PIONEER ELECTRONICS (USA) INC. GARANTIE LIMITEE PIONEER ELECTRONIQUE DU CANADA, INC. . . . GARANTIE VALl DE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE GARANTIE Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc.
PIONEER ELECTRONICS OF CANADA, INC. PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and PioneerEiectronicsOfCanada,lnc. (POC), warrantthatproductsdistributed by PUSAin the U.
