HTP-074_En.book 1 ページ 2016年4月25日 月曜日 午前10時12分 HTP-075 Home Theater Package / Home Cinema Package VSX-325 AV Receiver S-12A Speaker System Register your product on http://www.pioneerelectronics.com (US) http://www.pioneerelectronics.ca (Canada) http://www.pioneer.co.uk (or http://www.pioneer.eu).
HTP-074_En.book 2 ページ 2016年4月25日 月曜日 午前10時12分 Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Checking what’s in the box . . . . . . . . . . . . . . . . . . . . . 3 Installing the receiver . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Flow of settings on the receiver. . . . . . . . . . . . .
HTP-074_En.book 3 ページ 2016年4月25日 月曜日 Before you start Checking what’s in the box Please check that you’ve received the following supplied accessories: • Remote control • AAA size IEC R03 dry cell batteries (to confirm system operation) x2 • AM loop antenna • FM wire antenna • Speaker cables (3 m/10 ft.) x4 • Speaker cables (8 m/26 ft.
HTP-074_En.book 1 4 ページ 2016年4月25日 月曜日 午前10時12分 Controls and displays 2 Front panel 1 2 3 4 5 6 7 4 VSX-325 34 8 9 10 11 12 13 1 INPUT SELECTOR dial PRESET / (page 21). 2 Receiver control buttons 5 HDMI indicator Selects an input source (page 16). SPEAKERS – Use to change the speaker system on or off. When the SP OFF is selected, no sound is output from the speakers connected to this receiver. DIMMER – Dims or brightens the display. The brightness can be controlled in four steps.
HTP-074_En.book 5 ページ 2016年4月25日 月曜日 午前10時12分 1 Controls and displays 2 Display 14 15 16 17 18 16 19 4 34 20 21 22 23 24 14 PHASE Lights when the Phase Control is switched on (page 25). 15 AUTO Lights when the Auto Surround feature is switched on (page 23). 16 Tuner indicators RDS – Lights when an RDS broadcast is received (page 21). (For Europe) ST – Lights when a stereo FM broadcast is being received in auto stereo mode (page 20). TUNE – Lights when a normal broadcast channel.
HTP-074_En.book 6 ページ 2016年4月25日 月曜日 午前10時12分 1 Controls and displays Remote control 1 RECEIVER AUDIO SEL 9 As for operating other devices, the remote control codes for the Pioneer products are preset. The settings cannot be changed. 7 USB control buttons 1 ÍRECEIVER 8 TUNER control buttons Switches the receiver between standby and on. 2 Input function buttons DVD SAT STREAM BOX BD CBL S.BOX GAME CD TV Use to select the input source to this receiver (page 16).
HTP-074_En.book 7 ページ 2016年4月25日 月曜日 午前10時12分 1 Controls and displays Loading the batteries The batteries included with the unit are to check initial operations; they may not last over a long period. We recommend using alkaline batteries that have a longer life. Operating range of remote control The remote control may not work properly if: • There are obstacles between the remote control and the receiver’s remote sensor. • Direct sunlight or fluorescent light is shining onto the remote sensor.
HTP-074_En.book 2 8 ページ 2016年4月25日 月曜日 午前10時12分 Connecting your equipment Placing the speakers Affixing Non-Skid Pads By connecting the left and right front speakers (L/R), the center speaker (C), the left and right surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be enjoyed. To achieve the best possible surround sound, install your speakers as shown below. Apply the accessory non-skid pads to the bottom surfaces of the front/center/surround speakers 5.
HTP-074_En.book 9 ページ 2016年4月25日 月曜日 午前10時12分 2 Connecting your equipment Front left Front right Connecting the speakers The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is best for surround sound. Make sure you connect the speaker on the right to the right (R) terminal and the speaker on the left to the left (L) terminal.
HTP-074_En.book 10 ページ 2016年4月25日 月曜日 午前10時12分 2 Connecting your equipment Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration). If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. • If the video signal does not appear on your TV, try adjusting the resolution settings on your component or display.
HTP-074_En.book 11 ページ 2016年4月25日 月曜日 午前10時12分 2 Connecting your equipment Analog audio cables Standard RCA video cables Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals. These cables are the most common type of video connection and are used to connect to the composite video terminals. The yellow plugs distinguish them from cables for audio.
HTP-074_En.book 12 ページ 2016年4月25日 月曜日 午前10時12分 2 Connecting your equipment Connecting a TV and playback components Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you can connect it to this receiver using a commercially available HDMI cable. • The following connection/setting is required to listen to the sound of the TV over this receiver.
HTP-074_En.book 13 ページ 2016年4月25日 月曜日 午前10時12分 2 Connecting your equipment Connecting your component with no HDMI terminal This diagram shows connections of a TV and Blu-ray Disc/DVD player (or other playback component) with no HDMI terminal to the receiver.
HTP-074_En.book 14 ページ 2016年4月25日 月曜日 午前10時12分 2 Connecting your equipment 3 Place the AM antenna on a flat surface and in a direction giving the best reception. Connecting antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below). fig. b fig. a 4 Connect the FM wire antenna into the FM antenna socket. For best results, extend the FM antenna fully and fix to a wall or door frame.
HTP-074_En.book 15 ページ 2016年4月25日 月曜日 午前10時12分 2 Connecting your equipment Connecting a USB device Plugging in the receiver It is possible to listen to two-channel audio using the USB interface on the front of this receiver. Only plug in after you have connected all your components to this receiver, including the speakers. … … Switch the receiver into standby then connect your USB device to the USB terminal on the front panel of this receiver.
HTP-074_En.book 3 16 ページ 2016年4月25日 月曜日 Basic playback Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system. RECEIVER AUDIO SEL AV ADJUST DVD SAT STREAM BOX BD CBL S.BOX GAME CD TV MUTE VOLUME TRE HOME MENU BT AUDIO TUN USB BT PHASE S.RETRIEVER RETURN USB BASS TOP MENU AUX 1 2 3 4 午前10時12分 Switch on your system components and receiver.
HTP-074_En.book 17 ページ 2016年4月25日 月曜日 午前10時12分 3 Basic playback • When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and DTS (including DTS 96 kHz/24 bit) digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, SACD (DSD 2 ch only), PCM (32 kHz to 192 kHz sampling frequencies), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and DVD Audio (including 192 kHz).
HTP-074_En.book 18 ページ 2016年4月25日 月曜日 午前10時12分 3 Basic playback Playing a USB device It is possible to listen to two-channel audio using the USB interface on the front of this receiver. Important • Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this receiver.
HTP-074_En.book 19 ページ 2016年4月25日 月曜日 午前10時12分 3 Basic playback Music playback using BLUETOOTH® wireless technology You can wirelessly enjoy music files stored in a smartphone or other BLUETOOTH capable device. The coverage area is about 33 feet (10 meters). Note • The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo & Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners.
HTP-074_En.book 20 ページ 2016年4月25日 月曜日 午前10時12分 3 In the following locations, poor condition or inability to receive radio waves may cause the audio to be interrupted or stopped: • In reinforced concrete buildings or steel framed or ironframed buildings. • Near large metallic furniture. • In a crowd of people or near a building or obstacle. • In a location exposed to the magnetic field, static electricity or radio wave interference from radio communication equipment using the same frequency band (2.
HTP-074_En.book 21 ページ 2016年4月25日 月曜日 午前10時12分 3 Basic playback Listening to station presets You will need to have some presets stored to do this. See Saving station presets on page 20 if you haven’t done this already. … Press PRESET +/– to select the station preset you want. Naming preset stations For easier identification, you can name all of your preset stations. 1 2 3 Choose the station preset you want to name. See Listening to station presets above for how to do this. Press EDIT twice.
HTP-074_En.book 22 ページ 2016年4月25日 月曜日 午前10時12分 3 Basic playback 2 Displaying RDS information Use the DISP button to display the different types of RDS information available. … 4 Press DISP for RDS information. Each press changes the display as follows: • Listening mode • Master volume • Radio Text (RT) – Messages sent by the radio station. For example, a talk radio station may provide a phone number as RT. • Program Service Name (PS) – The name of the radio station.
HTP-074_En.book 4 23 ページ 2016年4月25日 月曜日 Listening to your system Choosing the listening mode This receiver offers a variety of listening modes to accommodate playback of various audio formats. Choose one according to your speaker environment or the source. … 午前10時12分 While listening to a source, press the listening mode button repeatedly to select a listening mode you want. PHASE S.
HTP-074_En.book 24 ページ 2016年4月25日 月曜日 午前10時12分 4 Listening to your system Multichannel sources STEREO ALC See above. Straight Decode No additional effects STEREOc See above. a. You can also adjust the C.WIDTH, DIMEN., and PNRM. effect (see Setting the Audio options on page 25). b. You can also adjust the C.IMG effect (see Setting the Audio options on page 25). c. You can choose the STEREO mode by using STEREO button.
HTP-074_En.book 25 ページ 2016年4月25日 月曜日 午前10時12分 4 Listening to your system Using the Sound Retriever When audio data is removed during the compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after compression. … Press S.RETRIEVER to switch the S.RTV (Sound Retriever) ON or OFF.
HTP-074_En.book 26 ページ 2016年4月25日 月曜日 午前10時12分 4 Setting/What it does LFE ATT (LFE Attenuate) Some Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultralow bass tones from distorting the sound from the speakers. The LFE is not limited when set to 0 dB, which is the recommended value. When set to –15 dB, the LFE is limited by the respective degree. When OFF is selected, no sound is output from the LFE channel. SACD G.
HTP-074_En.book 27 ページ 2016年4月25日 月曜日 午前10時12分 4 Listening to your system • The functions that can be set differ depending on the input signal or speaker settings.
HTP-074_En.book 28 ページ 2016年4月25日 月曜日 午前10時12分 4 Listening to your system 2 Changing the frequency step of AM Radio (Except for the U.S.A., Canada and Latin America models) 4 If you find that you can’t tune into stations successfully, the frequency step may not be suitable for your country/region. Here’s how to switch the setting: 1 2 34 Switch the receiver into standby. While holding down TUNE on the front panel, hold ÍSTANDBY/ON. Each press switches between 9K STEP and 10K STEP.
HTP-074_En.book 5 29 ページ 2016年4月25日 月曜日 午前10時12分 Home Menu Using the Home Menu The following section shows you how to make detailed settings to specify how you’re using the receiver, and also explains how to fine-tune individual speaker system settings to your liking. 4 Select the setting you want to adjust. Home Menu 1.Manual SP Setup 2.Input Assign 3.Auto Power Down 4.HDMI Setup Important • The OSD will not appear if you have connected using the composite output to your TV.
HTP-074_En.book 30 ページ 2016年4月25日 月曜日 午前10時12分 5 Home Menu • Subwoofer – LFE signals and bass frequencies of channels set to SMALL are output from the subwoofer when YES is selected (see notes below). Choose the PLUS setting if you want the subwoofer to output bass sound continuously or you want deeper bass (the bass frequencies that would normally come out the front and center speakers are also routed to the subwoofer).
HTP-074_En.book 31 ページ 2016年4月25日 月曜日 午前10時12分 5 5 Home Menu Adjust the level of each channel using / . If you selected Manual, use / to switch speakers. The Auto setup will output test tones in the order shown on-screen: [ [ [ [ [ 0dB 0dB] 0dB] 0dB] 0dB] 0dB] (CD) audio input terminal is assigned to CD under factory settings, but this can be changed to TV input. a.Speaker Setting b.X.Over c.Channel Level d.
HTP-074_En.book 32 ページ 2016年4月25日 月曜日 午前10時12分 5 Home Menu The Auto Power Down menu The HDMI Setup menu Set to automatically turn off the receiver after a specified time has passed (when the power has been on with no operation for several hours). (For the U.S.A.
HTP-074_En.book 33 ページ 2016年4月25日 月曜日 午前10時12分 5 Home Menu 2 Important • The ARC function may not operate even if the above conditions are met. If this is the case, listen to the TV audio after connecting this unit and the TV with an audio cable. • The CEC (Consumer Electronic Control) function may activate when the ARC function is turned ON, causing power to turn ON and OFF and the input to switch from one to another.
HTP-074_En.book 6 34 ページ 2016年4月25日 月曜日 Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there.
HTP-074_En.book 35 ページ 2016年4月25日 月曜日 午前10時12分 6 # Remove the obstacle or operate from another position. # Avoid exposing the remote sensor on the front panel to direct light. The display is dark. # Press DIMMER on the remote control repeatedly to return to the default. # During ECO mode, the brightness switches between 2 levels. If the dimmest level is selected, DIMMER will be shown on the display. (Mode other than ECO: 4 levels, ECO mode: 2 levels) Display flashes and cannot be operated.
HTP-074_En.book 36 ページ 2016年4月25日 月曜日 午前10時12分 6 Precautions • Do not place heavy or large objects on top of the speaker. Doing so could provoke the speaker to fall, causing damages or bodily injury. • Do not place the speaker on an unstable surface, as doing so may cause the speaker to fall and cause damage or bodily injury. • Switch off and unplug your AV equipment and consult the instructions when connecting up components. Make sure you use the correct connecting cables.
HTP-074_En.book 37 ページ 2016年4月25日 月曜日 午前10時12分 6 Additional information Wall-mounting the front and surround speaker system Resetting the main unit Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. Attaching the brackets • When attaching the speakers to brackets, always use the furnished brackets for wall mounting.
HTP-074_En.book 38 ページ 2016年4月25日 月曜日 午前10時12分 6 Specifications Audio section For the U.S.A., Canada and Latin America models Continuous average power output of 60 watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than 0.7 %** total harmonic distortion. Front (stereo) . . . . . . . . . . . . . . . . . . . . . . . . 60 W + 60 W Power output (1 kHz, 6 Ω, 0.7 %) . . . .
HTP-074_En.book 39 ページ 2016年4月25日 月曜日 午前10時12分 6 Additional information Furnished Parts Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Dry cell batteries (AAA size IEC R03) . . . . . . . . . . . . . . . . 2 AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Speaker cables (3 m/10 ft.) . . . . . . . . . . . . . . . . . . . . . . . .
HTP-074_En.book 40 ページ 2016年4月25日 月曜日 午前10時12分 6 Software license notice The licenses for the open source software used on this product are shown below. For accuracy purposes, here we have included the original texts (in English). FreeRTOS V6.0.5 Copyright (C) 2009 Real Time Engineers Ltd. The FreeRTOS.org source code is licensed by the modified GNU General Public License (GPL) text provided below.
HTP-074_En.book 41 ページ 2016年4月25日 月曜日 午前10時12分 6 5. 6. 7. 8. 9. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
HTP-074_En.book 42 ページ 2016年4月25日 月曜日 午前10時12分 http://www.pioneerelectronics.com (US) http://www.pioneerelectronics.ca (Canada) http://www.pioneer.co.uk (or http://www.pioneer.eu). (Europe) © 2016 Onkyo & Pioneer Corporation. All rights reserved. 2-3-12 Yaesu, Chuo-ku, Tokyo 104-0028 JAPAN 18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A.