MP3 Docking Station User Manual
Controls and displays
02
7
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Chapter 2
Controls and displays
Top and front panel
1 iPod connector port
Insert your iPod dock connector port to
connect and recharge your iPod unit.
2 iPod type adapter pocket
Holds the iPod type adapter that matches your
iPod unit.
3 Power indicator
Lights when your iPod is connected to the dock
connector port.
4 Remote sensor
See
Range of the remote control unit
on page 5
for more on this.
Rear panel
1 CONTROL IN terminal
Connect this to a Pioneer AV receiver (or
similar component)
CONTROL OUT
terminal
using the supplied SR cable. This allows you to
use the receiver's remote to control this unit.
Check your Pioneer receiver's operating
instructions for more on this.
1
2 S-VIDEO output terminal
Use to connect an S-video cable to your TV/AV
receiver to view the on-screen display or for
higher quality iPod video playback (no video is
output to the
VIDEO
terminal if you make this
connection).
3
VIDEO
output terminal
Connect a standard (composite) video cable to
your TV/AV receiver to view the on-screen
display or for iPod video playback.
4 AUDIO output terminal
Use to connect a stereo RCA/phono terminal
cable to your AV receiver /power amplifier for
two-channel audio.
5 AC adapter DC IN 12 V terminal
Use to connect the AC adapter to an AC power
outlet.
1 2
3 4
Note
1 If you have connected an SR cable to this terminal, you must point the remote control supplied with this unit at the remote
sensor of the connected receiver or amplifier.
IN
S
- VIDEO
DC IN 12 V
VIDEO R AUDIO L
CONTROL
OUTPUT
1234 5
IDK-01.book 7 ページ ２００６年５月１７日 水曜日 午後１時５５分