User's Manual

Basic Operations
5
5
5
1
1
1
1
2
2
2
2
4
4
4
4
3
3
3
1 Band indicator
2 5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3 LOC indicator
Appears when local seek tuning is on.
4 Preset number indicator
5 Signal level indicator
Shows the radio wave strength.
6 Frequency indicator
% Select a band
Press BAND/ESC/CANCEL.
# Band can be selected from among FM1, FM2,
FM3 or AM.
% Manual tuning (step by step)
Push MULTI-CONTROL left or right.
% Seek tuning
Push and hold MULTI-CONTROL left or right,
and then release.
# You can cancel seek tuning by pushing
MULTI-CONTROL lef t or right.
# While pushing and holding MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release
MULTI-CONTROL.
Storing and recalling
broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in
memory.
1 Press
/LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# To return to the ordinary display, press
BAND/ESC/CANCEL or
/LIST.
# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Using iTunes tagging
This function can be operated with the following
iPod models.
— iPod fifth generation
— iPod nano third generation
— iPod classic
However, tag information can be stored in this
unit even while the other iPod models are used.
It is possible to save the song’s information
(tag) from broadcasting station to your iPod.
The songs will show up in a playlist called
“Tagged playlist” in iTunes the next time you
sync your iPod. Then you can directly buy the
songs you want from iTunes Music Store.
Storing the tag information to
this unit
1 Tune in the broadcast station.
2 Press and hold MULTI-CONTROL if TAG
is indicated in the display while desired
song is broadcasting.
# While storing the tag data on this unit, TAG
flashes.
3 When completed, TAG Stored and
are displayed.
Tuner
En
15
English
Section
04