User's Manual

Storing the tagged information
to your iPod
1 Press SRC/OFF to select iPod1/iPod2.
2 When Tags transfer is displayed, use
MULTI-CONTROL to select Yes.
# If you do not want to store tag informations to
your iPod, select No.
# Tags transfer is displayed whenever you con-
nected your iPod to this unit as long as the
tagged information is stored in this unit.
# While transferring the tag,
Transferring to iPod is displayed. In this period,
do not operate this unit.
3 When completed, Transfer completed is
displayed and tagged informations are
stored on your iPod.
Note
You can also perform this operation in the menu
that appears by using MULTI-CONTROL while
using iPod1/iPod2 as the source.
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select Function.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
BSM (best stations memory)—Local (local
seek tuning)
Note
To return to the ordinary display, press
BAND/ESC/CANCEL.
Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select BSM in
the function menu.
3 Press MULTI-CONTROL to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
# To cancel, press MULTI-CONTROL again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select Local in
the function menu.
3 Press MULTI-CONTROL to turn local
seek tuning on.
# To turn local seek tuning off, press
MULTI-CONTROL again.
4 Push MULTI-CONTROL left or right to
set the sensitivity.
FM: Level 1—Level 2—Level 3—Level 4
AM: Level 1—Level 2
Larger setting number is higher level. The
highest level setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Tuner
En
16
Section
04