User's Manual

Important
In this section, voice recognition operation is illu-
strated in English. For about languages other
than English, please refer to enclosed command
list. Also, supported commands are shown in the
list.
Using voice recognition to
operate this unit
You can use voice recognition to perform op-
erations such as the following.
! Input a phone number, and make a call.
! Input a name stored in the memory and
make a call.
! Input a name and type stored in the mem-
or y, and make a call.
! Make a call by redialing.
! Access Help.
! Perform voice recognition again.
1 Press VOICE/
to start voice recogni-
tion.
The audio sound is muted, and a beep tone
sounds.
2 When you hear Voice Command,
please. and a beep tone, say a voice com-
mand.
3 Perform the operation in accordance
with the voice guidance.
Notes
! To cancel voice recognition partway through,
say cancel or abort or press SRC/OFF,
BAND/ESC/CANCEL,or
.
! When you want to return to the state immedi-
ately after voice recognition was started, say
Restart after you hear the beep tone to return
to the state of Step 2.
! If a voice command is said incorrectly, an
error occurs and the unit waits for a voice
command to be said. Say a correct voice com-
mand.
! If you are unsure of a voice command, say
Help or What can I say? to play the help
voice guidance.
! Voice recognition is possible when any of the
sources is selected, but a call can only be
made when a cellular phone is connected.
Refer to page 29, and check whether a cellular
phone is connected to this unit correctly. If a
voice command is said when no cellular
phone is connected, an error occurs and the
unit waits for a voice command to be said.
Connect a cellular phone and say a correct
voice command.
! For a list of voice commands, refer to page 43.
! When no voice command is said for 8 sec-
onds after you hear the beep tone, voice re-
cognition returns to ordinary display.
Using voice recognition to
make a call
You can use voice recognition to make a call.
This explanation uses the example of making
a call to 0123456789.
1 Start voice recognition.
Refer to Using voice recognition to operate this
unit on this page.
2 Say Dial 0123456789.
3 Say Dial.
4 A call is made to the number read out.
Notes
! A phone number of up to 32 digits long can
be read out. If a phone number that exceeds
32 digits is input, an error occurs and the unit
waits for a voice command to be said. Say a
correct voice command.
! You can also input a phone number in parts.
When inputting 01234 and 56789 separately,
say the next part of the number (56789) after
you hear 01234 complete the number other-
wise say dial or correction.
Using voice recognition to operate this unit
En
41
English
Section
09