User's Manual

1 Press PHONE/ /BT MENU to switch to
the phone number list mode.
# If TEL is selected as the source, press /LIST
to switch to the phone number list mode.
2 Use MULTI-CONTROL to select
Missed calls, Dialed calls or Received calls.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select a phone
number.
Turning MULTI-CONTROL to change the
phone numbers stored in the list.
# You can also change the phone number by
pushing MULTI-CONTROL up or down.
4 Press MULTI-CONTROL to display the
detailed list.
Name, phone number and date are displayed
in the detailed list.
# You can also display the detailed list by push-
ing MULTI-CONTROL right.
# You can scroll literal information by pressing
and holding DISP/SCRL. To stop scrolling, press
DISP/SCRL.
# Turning MULTI-CONTROL switches to the pre-
vious or next phone number displayed in the de-
tailed list.
# If you do not operate anything within about 30
seconds, the list display is canceled automati-
cally.
5 Press MULTI-CONTROL to make a call.
# While in the phone number list, press and
hold MULTI-CONTROL to add or delete + to the
phone number.
6 To end the call, press .
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select Function.
The function menu is displayed.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
PH B Transfer (phone book transfer)—
Auto answer (automatic answer setting)—
Echo cancel (echo cancel)—Far end Volume
(Adjust the intended party’s listening volume)
—Ring tone (ring tone select)—Number dial
(call by entering number)—
SCO Private Mode (private mode)
Notes
! To return to the playback display, press
BAND/ESC/CANCEL.
! If you do not operate functions other than
PH B Transfer, and Number dial within about
30 seconds, the display automatically returns
to the ordinary display.
! You can operate SCO Private Mode only
while talking on the phone.
! If Bluetooth telephone is not connected to this
unit, Number dial cannot be operated.
Transferring entries to the
phone book
Phone books in your cellular phone can be
transferred to this unit by using your cellular
phone.
! 1 000 entries for each user (max. 5 devices)
can be stored in the phone book. Each in-
dependent entry can hold five phone num-
bers and genres.
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select
PH B Transfer.
3 Press MULTI-CONTROL to enter the
phone book transfer standby mode.
Using Bluetooth wireless technology
En
38
Section
08