Operation Manual
03
18
En
Remote control
• For more information on using the remote control, see Operating the remote control on page 27.
Operating the receiver subwoofer
This section explains how to operate the remote control for the
receiver subwoofer. Note that the controls change when you have
chosen the input function for separate connected devices, such as
an Blu-ray disc player.
1SYSTEM ON
Switches the receiver subwoofer and Blu-ray disc player to On
2SYSTEM OFF
Switches the receiver subwoofer and Blu-ray disc player to Off
(Standby).
3TV INPUT
Select an input source of the TV.
TV
Switches the TV to On/Standby.
4 INPUT SELECT buttons
Change the input for the receiver subwoofer. You will also need to
press one of these buttons when operating another connected
component via this remote control.
BD (HDMI 1)
Switches the input to the included Blu-ray disc player (
BD)
connected to HDMI 1.
The remote control switches to the Blu-ray disc player operating
mode.
DVR (HDMI 2)
Switches the input to the HDD/DVD recorder (
DVR) connected
to HDMI 2 (when a separately sold Pioneer HDD/DVD recorder
is connected).
The remote control switches to the HDD/DVD recorder
operating mode.
The HDD/DVD recorder’s power can be switched between on
and standby using the button below.
DVD (HDMI 3)
Switches the input to the DVD player (
DVD
) connected to
HDMI 3
(when a separately sold Pioneer DVD player is connected).
The remote control switches to the DVD player operating mode.
The DVD player’s power can be switched between on and
standby using the button below.
TV
Switches to the input selected at TV Input setup (page 40).
FM/AM
Switches between FM and AM bands (page 34).
5 LCD touch screen
Displays the buttons used to control external components such as
a receiver subwoofer (SYSTEM), Blu-ray disc player (BD), Flat
Screen TV (PDP), HDD/DVD recorder (DVR) and DVD player (DVD).
The current operating mode is displayed at the top of the remote
control’s screen.
Although the LCD touch screen disappears if you do not perform
any operations for a while, it appears when the screen is touched or
a button on the remote control is pressed.
6 Other component button
Use to operate the Blu-ray disc player or other connected
component.
7 LIGHT
The LCD touch screen’s illumination turns on and off each time the
button is pressed.
The illumination automatically turns off after 30 seconds. When
turned off by pressing the button, the display turns off one minute
later.
8 /// (cursor buttons) and ENTER
Use to control receiver functions.
ON
SYSTEM
INPUT
SELECT
OFF
HDMI 1 HDMI 2 HDMI 3
BD DVR DVD
INPUT
TV
FM
/
AM
TV
TOP MENU
DISC
NAVIGATOR
HOME
MENU
DISPLAY
LIGHT
TOOLS
MENU
PAG E
RETURN
VOL
SYSTEM
SYSTEM
CONTROL
MUTE
GUIDE
TV
VOL
INFO
SETUP
SYSTEM
SURR
GENRE
SLEEP
EXIT
MCACC SOUND
DIRECT
ADV.
SURR
TEST
TONE
SOUND
RTRV
LINE
F.S.
SURR
5
9
11
12
8
4
10
7
13
14
1
3
2
6
6
15
16 17
19
18
20 21 22
23 24
LX01BD_1.book Page 18 Tuesday, September 2, 2008 12:33 PM
Downloaded from www.Manualslib.com manuals search engine