Operation Manual

65
En
02
Erasing the additional
data from BD-ROMs
When a BD-ROM is played, additional data may be stored in the
player’s memory (local storage).
If the message indicating low memory (local storage) appears, erase
the BDMV data.
Caution
• When the BDMV data is erased, all the data of secondary video
(Picture-in-Picture), secondary audio, bookmark, etc. that has
been stored is erased.
1 Display the Tools menu.
With no disc loaded, press the TOOLS button.
2 Select and set the item.
Use / to select BDMV Data Erase, then press ENTER.
3 Erase the data.
Use / to select Yes, then press ENTER.
Caution
• It takes time to erase the BDMV data for a while. Do not unplug
the power cord for about 10 seconds after performing the above
procedure.
Switching the video
output terminal
Use the procedure below to switch the video output terminal. Switch
between the digital output (HDMI output) and the analog output
(Component Video output, S-Video output or Video output).
 Switch the terminal from which the video signals are
output.
Press VIDEO SEL (LCD page 2).
The video output terminal switches each time the button is pressed.
Caution
• The picture may not be displayed for a while when the video
output terminal is switched.
•When the HDMI OUT terminal is selected, no video signals are
output from the other video output terminals.
• When a video output terminal other than the HDMI OUT
terminal is selected, no video signals are output from the HDMI
OUT terminal. However, audio signals are output.
Switching the output
video resolution
Use the procedure below to switch the output video resolution from
the various video output terminals.
 Press RESOLUTION / (LCD page 2).
The current output video resolution is displayed on the TV screen
and on the player’s front panel display.
When pressed again, the output video resolution switches.
The output video resolution can also be switched using /.
PAG E
TOP MENU
DISC
NAVIGATOR
DISPLAY LIGHT
TOOLS
MENU
TOOLS
Output Video Resolution
BDMV Data Erase
BD PLAYER
TOOLS
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Ye s No
Erases all of the data
added from BDMV.
Please wait a while.
OK to erase data?
BD 2/2
123
BD 2/2
PLAY
MODE
RESO-
LUTION
VIDEO
ADJ
VIDEO
SEL
VIDEO
SEL
FL
DIMMER
BD 2/2
123
BD 2/2
PLAY
MODE
RESO-
LUTION
VIDEO
ADJ
VIDEO
SEL
FL
DIMMER
Auto


Output Video Resolution
Source : 1080/50i
Current Output : 1080/50i
Video resolution of the
currently playing disc
Output video resolution
from the player
Example:
LX01BD_2.book Page 65 Friday, September 5, 2008 11:29 AM
Downloaded from www.Manualslib.com manuals search engine