Operation Manual

04
80
En
Note
• Prog.Motion and Pure Cinema have the effect only for pictures
recorded in the interlaced scan format (576i/480i or 1080i
signals).
• Prog.Motion is disabled when Pure Cinema is set to On.
• Black Setup have the effect only for pictures output from the
VIDEO and S-VIDEO output terminals, and for NTSC signals
output.
• YNR, CNR, BNR and MNR are disabled when 1080/24p signals
are output from the HDMI OUT terminal.
 Closing the Video Adjust screen
Press HOME MENU.
 About Pure Cinema
There are two types of video signals:
• Video material – Video signals recorded at 25 or 30 frames/
second
• Film material – Video signals recorded at 24 frames/second
“Pure Cinema” uses signal processing suited for “film material”
when converting 576i/480i or 1080i interlaced video signals into
progressive video signals, resulting in clear picture reproduction
without losing the quality of the material.
is displayed on the disc information screen when playing the
“film material” pictures of DVD-Video discs (page 70).
Adjusting the Audio DRC
Audio DRC (Dynamic Range Control) has the effect of playing loud
sounds softly and soft sounds loudly. Adjust the setting for example
when watching movies late at night and the dialogs are difficult to
hear.
1 During playback, display the TOOLS menu.
Press TOOLS.
2 Select and set Audio DRC.
Use / to select, then press ENTER.
3 Adjust the setting.
Use / to switch between Off, Low, Medium, High and Auto.
 Closing the Audio DRC screen
Press ENTER or HOME MENU.
Note
• This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby
Digital audio signals of BDs, DVDs and movie files.
•When Auto is selected, the setting has the same effect as High
or Off for Dolby TrueHD signals, depending on the content. For
Dolby Digital Plus and Dolby Digital, the setting has the same
effect as Off.
• Audio DRC affects the audio signals output from the following
audio output terminals:
– Analog audio signals output from the AUDIO OUT (2 ch) or
AUDIO OUT (7.1 ch) terminals.
– Linear PCM audio signals output from the DIGITAL OUT
terminals or HDMI OUT terminal.
• The effect may be weak for some discs.
PAG E
TOP MENU
DISC
NAVIGATOR
DISPLAY LIGHT
TOOLS
MENU
TOOLS
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Audio
Subtitle
Audio DRC
Video Adjust
Output Video Resolution
BD PLAYER
TOOLS
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Audio DRC
Off
Adjust the audio dynamic range. This setting is
ineffective depending on the playing audio.
LX01BD_2.book Page 80 Friday, September 5, 2008 11:29 AM
Downloaded from www.Manualslib.com manuals search engine