Operation Manual

93
En
06
Connecting to a TV with no HDMI input
Caution
• When connected to the TV using a component video cable
(commercially available), video signals are not output with a
resolution of 1080/50i, 1080/50p, 720/50p, 1080/24p or 1080/60p.
• Depending on the output video resolution setting, the picture
may not be output (page 65).
• Video signals are output with a resolution of 576/50i or 480/60i
when connected using a video cable (commercially available) or
an S-Video cable (commercially available).
• Connect the player’s video output directly to your TV.
This player supports analog copy protection technology.
Therefore the picture may not be displayed properly if connected
to a TV via a DVD recorder/video deck or when playing the
player’s output material that is recorded by a DVD recorder/
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
R
R
AUDIO OUT ( 2 ch ) AUDIO OUT ( 7.1 ch )
VIDEO OUT
HDMI OUT
DIGITAL
OUT
CONTROL
IN
L
L
Y
P
B
PR
FRONT
OPTICAL
COMPONENT
VIDEO
SURROUND
CENTER
VIDEO
S-VIDEO
SUB WOOFER
SURROUND BACK
AC IN
HDMI
OUT IN 3
SYSTEM
IN 2 IN 1
Direction of
signal flow
HDMI cable
(included)
TV
Audio cable (commercially available)
Red
White
Yellow
Video cable (commercially available)
An S-Video cable (commercially available) can also be used for connection.
Component cable or three video cables (commercially available) can also be used for connection.
To audio input
terminals
To component video input
terminals
To video input
terminal
To S-Video input
terminal
Receiver subwoofer’s rear panel
Player’s rear panel
LX01BD_2.book Page 93 Friday, September 5, 2008 11:29 AM
Downloaded from www.Manualslib.com manuals search engine