00_C_cover_ANKI_EN.
SVM-1000_B_En.book 2 ページ 2007年11月26日 月曜日 午後12時54分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory K015 En drawings.
SVM-1000_B_En.book 3 ページ 2007年11月26日 月曜日 午後12時54分 We Want You Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
01_C_FEATURES_EN.fm 4 ページ 2010年6月2日 水曜日 午後9時47分 CONFIRM ACCESSORIES / CAUTIONS REGARDING HANDLING / FEATURES CONFIRM ACCESSORIES Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SVM-1000_B_En.book 5 ページ 2007年11月26日 月曜日 午後12時54分 FEATURES Improved design and operability for new club culture Based on the concept of creating “a design that fascinates,” the boxy-shape of previous DJ mixers has been restyled toward an edgier and more solid design. Great attention has been given to details of materials and design, such as employing an “illumination display” on the rear panel visible from the dance floor.
SVM-1000_B_En.
SVM-1000_B_En.book 7 ページ 2007年11月26日 月曜日 午後12時54分 NAMES AND FUNCTIONS OF PARTS 22 MIDI OUT connector DIN type output connector. Use to connect to other MIDI component. 23 MIDI USB output connector USB-B type output connector. Use to connect to a computer.
SVM-1000_B_En.book 8 ページ 2007年11月26日 月曜日 午後12時54分 NAMES AND FUNCTIONS OF PARTS 10 HEADPHONES output switch (MONO SPLIT/STEREO) MONO SPLIT: The source sound selected with the headphone CUE button is output to the L channel, while the master sound is output to the R channel (only when [MASTER] is selected with the headphone CUE button). STEREO: The audio source selected with the headphone CUE button is output in stereo.
SVM-1000_B_En.book 9 ページ 2007年11月26日 月曜日 午後12時54分 NAMES AND FUNCTIONS OF PARTS 35 Master level indicator (MASTER L, R) These segment indicators display the audio output level from L and R channels. The indicators have a two-second peak hold. 36 Master balance dial (BALANCE) Use to adjust the L/R channel balance for audio master output, booth monitor output, recording output, and digital output. 37 BOOTH MONITOR level control dial This dial is used to adjust the booth monitor output volume.
SVM-1000_B_En.book 10 ページ 2007年11月26日 月曜日 午後12時54分 CONNECTIONS CONNECTIONS Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.
SVM-1000_B_En.book 11 ページ 2007年11月26日 月曜日 午後12時54分 CONNECTIONS CONNECTING OUTPUTS Power amplifier (RCA plug input connectors) Digital input AV amplifier (digital input recording device) Cassette deck (analog input recording device) MASTER ATT.
SVM-1000_B_En.book 12 ページ 2007年11月26日 月曜日 午後12時54分 CONNECTIONS CONNECTING MICROPHONE AND HEADPHONES 9 Microphone 8 HEAD PHONES MONO SPL T A microphone with XLR-type or Ø 6.3 mm phone-type plug can be connected to the MIC 1 connector on the operation panel (upper) . The MIC 2 jack on the connection panel (rear) can be used to connect a microphone with Ø 6.3 mm phone-type plug.
SVM-1000_B_En.book 13 ページ 2007年11月26日 月曜日 午後12時54分 BASIC OPERATIONS BASIC OPERATIONS POWER VIDEO MASTER LEVEL VIDEO TRIM AUDIO MASTER LEVEL VIDEO INPUT AUDIO INPUT AUDIO TRIM HI HI, MID, LOW HI, MID, LOW Channel fader lever 0 1 9 9 8 7 7 6 5 5 4 3 BALANCE 3 2 1 0 CROSS FADER ASSIGN 1 2 3 4 5 Set rear panel POWER switch to [ON]. Set the AUDIO INPUT switch for the desired channel to match the type of connected component. • When using the DVD input, set to [DVD].
SVM-1000_B_En.book 14 ページ 2007年11月26日 月曜日 午後12時54分 BASIC OPERATIONS MONO/STEREO MIC1 LEVEL MIC2 LEVEL HI, LOW HI MIC CUE MONO SPLIT/STEREO MIXING LEVEL 0 0 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 0 0 BOOTH MONITOR CH FADER CURVE CROSS FADER CURVE Selecting Stereo or Monaural When the MONO/STEREO switch is set to [MONO], the audio master output becomes a monaural combination of L+R channels.
SVM-1000_B_En.book 15 ページ 2007年11月26日 月曜日 午後12時54分 USING THE VIDEO CONTROL FUNCTIONS USING THE VIDEO CONTROL FUNCTIONS Touch the LCD screen to control video functions. Supports video cross fader functions and video channel switch functions. 2 VIDEO SOLO MODE 3 HI FADER AV SYNC 1 0 9 8 7 6 5 4 3 2 1 0 CROSS FADER ASSIGN Cross fader lever (A/B) OPERATING THE VIDEO CROSS FADER The video cross fader is used to manipulate video images.
SVM-1000_B_En.book 16 ページ 2007年11月26日 月曜日 午後12時54分 USING THE VIDEO CONTROL FUNCTIONS OPERATING IN THE VIDEO SOLO MODE Setting video solo mode to ON allows instantaneous switching to the desired channel’s video. By combining with the FADER AV SYNC button ON/OFF, a variety of operations is possible. Whenever the power is first turned ON, the video solo mode is set to OFF by default. When the video solo mode is ON, the VIDEO SOLO MODE button will flash.
SVM-1000_B_En.book 17 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION USING THE EFFECT FUNCTION This function applies effects to the selected channel’s sound and video. Effects include BEAT effects, which are applied in linkage to the track’s BPM; TOUCH effects, which control effects by directly touching the screen; and TEXT effects, which display onscreen characters with effects added in rhythm to the track.
SVM-1000_B_En.book 18 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION 1 Touch the [BPM AUTO/TAP] button to select the BPM (=Beat Per Minute) measurement mode. AUTO: The BPM is automatically measured from the input music signal. TAP: Tap the TAP button with your finger to manually input the BPM. • Whenever power is first turned ON, [AUTO] is selected by default. • The selected mode ([AUTO]/[TAP]) will appear in the display.
SVM-1000_B_En.book 19 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION USING TOUCH EFFECTS 6 [HOLD] button When [HOLD] button is set to [ON], effects are recorded from the time the screen is touched until the finger is removed. 7 [VISUALIZER] button Internally creates a video image to which TOUCH effects can be applied. With TOUCH effects, many effects can be created by touching the video EFFECT performance monitor.
SVM-1000_B_En.book 20 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION 2 3 4 Use the effect select buttons to choose a desired image. Touch the image to apply changes. Use the CH SELECT dial to select the desired channel. • In the event no input image is present, the visualizer’s image can be used. 5 Video EFFECT monitor Monitors the TEXT effects. 6 [TEXT EDIT] button Touch to edit the text of the selected [TEXT BANK] button.
SVM-1000_B_En.book 21 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION 7 8 Touch the beat button to choose the multiplication factor of the beat for synchronization of the effect. • Select the beat number calculated from the BPM. • The selected beat button will be highlighted. • An effect time that corresponds to the multiplication factor of the beat will be automatically set.
SVM-1000_B_En.book 22 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION 18 [DELETE] button Touch to delete entered text. The text behind the cursor will be deleted. Hold depressed to delete all text. EDITING TEXT 5 4 3 2 1 6 7 8 9 14 12 10 11 15 18 13 16 17 19 20 Touch to exit the TEXT EDIT screen and return to the TEXT effect screen. 1 [EXIT] button 2 [FACTORY TEXT] Touch to load factory text data. button 3 [LOAD] button Touch to load text data from an SD card.
SVM-1000_B_En.book 23 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION EFFECT LIST BEAT effects (*1) VIDEO AUDIO VIDEO AUDIO VIDEO AUDIO (*2) VIDEO AUDIO AUDIO VIDEO AUDIO VIDEO AUDIO VIDEO AUDIO (*2) VIDEO 8. REVERB 7. PHASER 6. FLANGER 5. FILTER 4. TRANS 3. PAN 2. ECHO (*7) 1.
SVM-1000_B_En.book 24 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION Parameter 1 (TIME/PARAMETER) Beat button parameter Sets the effect of the robotic sound pitch between –100 % and 100 % Sets the ratio of the mix between the Sets the ratio of the mosaic size and the original video mix between the between –100 % and 100 % mosaic size and the original video. The up and down swinging is enhanced as the dial is rotated to the right.
SVM-1000_B_En.book 25 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION 1. RIPPLE (*2) TOUCH effects (*1) Parameter 1 (TIME/PARAMETER) Parameter 2 (LEVEL/DEPTH) Description Description Description of the effect Description of the effect when touched AUDIO Phasing effect is applied proportional to the volume of the input bass sound. Touch the screen toward the right to – enhance the effect. Touch toward the left to reduce the effect.
SVM-1000_B_En.book 26 ページ 2007年11月26日 月曜日 午後12時54分 4. DISTORTION (*2) USING THE EFFECT FUNCTION Parameter 1 (TIME/PARAMETER) Description of the effect Description of the effect when touched AUDIO (*4) Outputs a phaser effect with reverberation. Touch more toward the right to – increase the length of the phaser effect cycle. Touch toward the left for shorter cycle length. VIDEO Outputs an image with a warping effect.
SVM-1000_B_En.book 27 ページ 2007年11月26日 月曜日 午後12時54分 7. KALEIDO USING THE EFFECT FUNCTION AUDIO Outputs the input sound as if it Touch more toward the right to – were being made by a robot. increase the pitch. Touch toward the left to lower the pitch. VIDEO Outputs a kaleidoscope-like effect. PATTERN1 Outputs an image circularly dividing the screen from the center of the screen. PATTERN2 Outputs an image horizontally dividing the screen (vertically stacked).
SVM-1000_B_En.book 28 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION Description of the effect Description of the effect when touched AUDIO Flanger effect is applied. Move Touch more toward the right to finger on touch panel to right- lengthen the cycle of the flanger left to change effect volume. effect. Touch toward the left for shorter effect cycle. VIDEO Outputs an image with a twisting rotational effect.
SVM-1000_B_En.book 29 ページ 2007年11月26日 月曜日 午後12時54分 12. DROP (*3) USING THE EFFECT FUNCTION AUDIO Flanger effect is applied. Move Touch more toward right side to – finger on touch panel to right- enhance effect. Touch more toward left to change effect volume. left side to decrease effect. VIDEO Outputs an image of a circle with color in motion. PATTERN1 Outputs an image of a circle with dot designs. PATTERN2 Outputs an image of a circle with border designs.
SVM-1000_B_En.book 30 ページ 2007年11月26日 月曜日 午後12時54分 USING THE EFFECT FUNCTION TEXT effects AUDIO Dramatically changes the sound tone by moving the frequency of the filter in rhythm to the beat. For the time of 1 BPM beat, a 1/2 to Sets the interval for 10 ms to 32/1 time will be set for the interval in which the cutoff 32 000 ms which the cutoff frequency is moved. frequency moves. Rotate dial clockwise to enhance effect.
SVM-1000_B_En.book 31 ページ 2007年11月26日 月曜日 午後12時54分 USING THE JPEG VIEWER USING THE JPEG VIEWER JPEG files can be loaded and displayed from USB memory devices and SD cards. Up to eight JPEG files can be loaded. USB JPEG VIEWER SETUP 1 Press the JPEG VIEWER button. The JPEG play mode screen will appear.
SVM-1000_B_En.book 32 ページ 2007年11月26日 月曜日 午後12時54分 USING THE JPEG VIEWER Loading JPEG files to the SVM-1000 Using a JPEG file by assigning it to a channel. Use this function to load JPEG files into the JPEG BOX. When effect is ON, this function is not usable. 1 Touch the [JPEG SELECT] button in the JPEG play mode screen. The JPEG select mode screen will appear. The JPEG play mode includes MANUAL MODE, AUTO MODE, and FADER MODE, allowing a wide range of performance styles.
SVM-1000_B_En.book 33 ページ 2007年11月26日 月曜日 午後12時54分 USING THE JPEG VIEWER Operating in FADER MODE Using the JPEG images in the JPEG BOX, a slide show can be created with transitions between images at chosen intervals. The channel fader for the assigned channel is used to perform the transitions. 1 Touch the [FADER MODE] button to select FADER mode. 2 Select the images you wish to use from the JPEG BOX. Touch multiple images on the screen and their borders will change to white.
SVM-1000_B_En.book 34 ページ 2007年11月26日 月曜日 午後12時54分 THE VIDEO EQUALIZER FUNCTION THE VIDEO EQUALIZER FUNCTION Rotating the channel equalizer dial normally applies equalizer effects on audio only. However, by using the VIDEO EQ function, effects can be applied to video as well. VIDEO EQ SET UP Use to make the video effects change simultaneously when using the equalizer. OFF: Disables the VIDEO EQ. VIDEO EQ R: Used when assigning parameters that change the red elements of the VIDEO EQ.
SVM-1000_B_En.book 35 ページ 2007年11月26日 月曜日 午後12時54分 FADER START FUNCTION FADER START FUNCTION By connecting the optional Pioneer DJ/VJ DVD Player or DJ CD Player control cable, the channel fader and cross fader can be used to start DVD/CD playback. When the mixer’s channel fader lever or cross fader lever are moved, the DVD/CD player is released from the pause mode and automatically –and instantly – begins playback of the selected track.
SVM-1000_B_En.book 36 ページ 2007年11月26日 月曜日 午後12時54分 PERFORM UTILITY SETUP PERFORM UTILITY SETUP Set up MIDI 1 UTILITY (SET UP) 2 HI 3 1 0 9 8 7 6 5 4 3 2 1 0 4 Hold the UTILITY (SET UP) button depressed. The MIDI setup mode will be initiated. Touch [MIDI]. The MIDI setup screen will be displayed. Touch each applicable button. Touch each applicable button on the screen to operate the MIDI setup. Touch [EXIT]. This will end the MIDI setup mode.
SVM-1000_B_En.
SVM-1000_B_En.book 38 ページ 2007年11月26日 月曜日 午後12時54分 PERFORM UTILITY SETUP Category BOOTH Switch Name MIDI Message Switch Type MSB Commnets LSB MONITOR VR Bn 19 dd 0 to 127 AUTO/TAP BTN Bn 45 dd OFF=0, ON=127 TAP BTN Bn 4E dd OFF=0, ON=127 EFFECT CUE BTN Bn 4B dd OFF=0, ON=127 CH SELECT SW VIDEO FX PATTERN SW Cn For CHANNEL SELECT and VIDEO FX PATTERN, the logical sum of both values is sent.
SVM-1000_B_En.book 39 ページ 2007年11月26日 月曜日 午後12時54分 PERFORM UTILITY SETUP GUI BUTTONS Category EFFECT CATEGORY BEAT EFFECT TOUCH EFFECT Switch Name MIDI Message Switch Type MSB Commnets LSB BEAT EFFECT BTN — — — TOUCH EFFECT BTN — — — TEXT EFFECT BTN — — — A BTN — — — AV BTN — — — V BTN — — — Changing the category inevitably causes an effect program change.
SVM-1000_B_En.
SVM-1000_B_En.book 41 ページ 2007年11月26日 月曜日 午後12時54分 PERFORM UTILITY SETUP PERFORM VIDEO MONITOR SETUP KEYBOARD LANGUAGE SETUP Set the video monitor output method. By connecting a keyboard to the USB connector, text can be entered through the keyboard during text edit mode (P. 22). Follow these steps to set up the connected keyboard type. Video monitor setup 1 2 3 4 Hold the UTILITY (SET UP) button depressed. This will initiate the utility setup mode. Touch [VIDEO MONITOR].
SVM-1000_B_En.book 42 ページ 2007年11月26日 月曜日 午後12時54分 HARDWARE SETUP HARDWARE SETUP POWER SYSTEM SETTINGS 1 UTILITY (SET UP) 2 Touch [SYSTEM]. The SYSTEM setting screen will be displayed. Choose settings by touching [] or []. HI 1 0 9 8 7 6 5 4 3 2 1 0 The hardware setup values are preserved even when power is turned OFF. Initiate hardware setup 1 Turn the POWER switch on while pressing the UTILITY (SET UP) button.
SVM-1000_B_En.book 43 ページ 2007年11月26日 月曜日 午後12時54分 HARDWARE SETUP MASTER OUT SETTINGS MONITOR OUT SETTINGS 1 1 2 Touch [MASTER OUT]. The MASTER OUT setting screen will be displayed. Choose settings by touching [] or []. BRIGHTNESS Adjusts the brightness of the master output monitor. CONTRAST Adjusts the contrast of the master output monitor. COLOR Adjusts the color tone of the master output monitor. • Cannot be adjusted when the PAL video system is used.
SVM-1000_B_En.book 44 ページ 2007年11月26日 月曜日 午後12時54分 HARDWARE SETUP TOUCH PANEL SETTINGS 1 2 4 Touch all [+] marks and make sure the color of the [+] marks are inverted. 5 Touch [SAVE] to save the settings. The settings will not be implemented unless [SAVE] is touched. Touch [TOUCH PANEL]. The touch panel setting screen will be displayed. Touch either [TOP PANEL] or [BOTTOM PANEL] to select settings. TOP PANEL Calibrates the TOP panel.
SVM-1000_B_En.book 45 ページ 2007年11月26日 月曜日 午後12時54分 TROUBLESHOOTING TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below. Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use. If the trouble cannot be rectified even after checking the following items, contact your dealer or nearest PIONEER service center.
12_C_TROUBLESHOOT.fm 46 ページ 2010年6月3日 木曜日 午後1時23分 TROUBLESHOOTING Symptom No video image, or image is disrupted. Possible Cause Remedy • VIDEO INPUT switch is set incorrectly. • Connection cables are not connected properly, or are disconnected. • Connectors or plugs are dirty. • Trim controls are set improperly. • Signal format of the input video source does not match the system setting selected during hardware setup.
SVM-1000_B_En.book 47 ページ 2007年11月26日 月曜日 午後12時54分 SPECIFICATIONS SPECIFICATIONS 1 General Power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 W Operating temperature . . . . +5 °C to +35 °C (+41 °F to +95 °F) Operating humidity . . . . . . . . . .5 % to 85 % (without condensation) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.
14_C_DIAGRAM.fm 48 ページ 2011年4月27日 水曜日 午後1時54分 To register your product, find the nearest authorized service location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs : Pour enregistrer votre produit, trouver le service après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes d’emploi ou des accessoires, reportez-vous aux URL suivantes : In the USA/Aux Etats-Unis http://www.pioneerelectronics.