Instructions de mise à jour et Addenda au manuel de fonctionnement Carte microSDHC 2012 POUR MISE À NIVEAU DE NAVIGATION T1000-19324 This software upgrade will result in changes to certain features and availability of information. While the changes are intended to improve the overall user experience for most users, Pioneer and its licensors disclaim any warranty or liability for damages in connection with such changes.
En
English 3 En
En
English 5 En
En
Contents English Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Important ! The screens shown in the examples may differ from actual screens. ! Actual screens may be changed without notice for performance and function improvements. License, Warranty Disclaimer & Limitation of Liability PIONEER PRODUCT - for U.S.A.
Chapter 01 License, Warranty Disclaimer & Limitation of Liability PIONEER PRODUCT - for U.S.A. THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS (USA) INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Chapter License, Warranty Disclaimer & Limitation of Liability 4 EXPORT LAW ASSURANCES You agree and certify that neither the Software nor any other technical data received from Pioneer, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States.
Chapter 01 License, Warranty Disclaimer & Limitation of Liability PIONEER PRODUCT - for Canada THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS OF CANADA, INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Chapter License, Warranty Disclaimer & Limitation of Liability obtained by you outside of Canada, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of Canada and the laws and regulations of the jurisdiction in which you obtained the Software.
Chapter 01 License, Warranty Disclaimer & Limitation of Liability SAFETY PROVISIONS Disclaimer THE WARRANTIES SET FORTH IN PIONEER’S LIMITED WARRANTY ARE THE ONLY WARRANTIES MADE BY PIONEER OR ANY OF ITS LICENSORS, AS APPLICABLE. PIONEER AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Chapter About the database ! Modifications related to roads, streets/highways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably, those modifications after that period are not reflected in this database. ! Regardless of existing and newly-built things, the data may be different from the actual condition. ! For details about the map coverage of this navigation system, refer to the information on our website.
Chapter 03 Precaution ! Read the entire manual before upgrading the program of your navigation system. ! This package is unique, and cannot be installed on more than one unit. ! Web-connected computer is required for online issuance of password.
Chapter Precaution “microSD card” The microSD card and microSDHC card are collectively referred to as the “microSD card”. p Keep the microSD card out of the reach of small children to prevent them from accidentally swallowing it. p Do not store the microSD card in high temperatures or direct sunlight. p Do not subject the microSD card to shock or impact. p Do not allow the microSD card to come into contact with liquids. Damage to the microSD card and your products could result from contact with liquids.
Chapter 03 Precaution Visit our website Visit us at the following site: http://www.pioneerelectronics.com In Canada http://www.pioneerelectronics.ca 1 Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. 2 Receive updates on the latest products and technologies. 3 Download owner’s manuals, order product catalogs, research new products, and much more.
Chapter Functions enabled or disabled by upgrade 04 English If you upgrade your navigation system using this product, the system will have the following changes. Group 1: AVIC-Z110BT Group 2: CNSD-110FM, AVIC-Z120BT or AVIC-X920BT Group 3: CNSD-210FM 1: Functions and operations changed by upgrade Navigation functions Map function Summary of changes Group 1 Group 2 Group 3 The Voice icon displayed on the map screen will no longer appear.
Chapter 04 Functions enabled or disabled by upgrade Navigation functions Summary of changes Navi Settings Group 1 Group 2 Group 3 Upgrading enables the Eco-driving function, which supports environmentally-friendly driving. ! Displaying Eco-Meter on the map ! Checking the eco-friendly driving status ! Displaying Eco Drive Level guidance ! Sudden start alert 1 — — “Position Fix” function will be added to the “Quick Access” menu.
Chapter Functions enabled or disabled by upgrade Pandora® Aha Radio AV Settings Summary of changes Group 1 Group 2 Group 3 By connecting a smartphone that has installed the Pandora application, you can experience Pandora in your navigation system. p Before connecting an Android™ device or BlackBerry® device, update the Bluetooth firmware version to 3.24. 1 — — The following devices will be compatible with Pandora.
Chapter 04 Functions enabled or disabled by upgrade Setting items to be deleted and initialized by upgrade Unchanged functions on the upgraded program The following data and settings will be cleared and reset to default values. Other items will be retained. However, some items are not listed because the setting can be easily recovered by users, such as the last cursor position on the map screen. Bold indicates functions or command names.
Chapter Instructions for upgrading 1 Check the device number of your navigation system. = For details of the operation, refer to Checking the device number on this page. j 2 Get the password for authentication. = For details, refer to Getting the password for authentication on this page. j 3 Upgrade the software program of your navigation system. = For details of the operation, refer to Upgrading the software program and the map database on the next page.
Chapter 05 Instructions for upgrading 1 Access on the following website to issue your password. http://www.pioneernavigationupdate.com In Canada: http://www.pioneernavigationupdate.ca For issuing the password, follow the instruction on the website. 3 Insert the upgrade microSD card #1 (8 GB) into the SD card slot. The message confirming whether or not to start the update will appear. 4 Touch [Yes]. 2 Record the password that you received. You need to input this password accurately.
Chapter Instructions for upgrading Updating the Bluetooth wireless technology software (for AVIC-Z110BT) English 8 Wait until the upgrade process is complete. 05 p This description is for customers updating the Bluetooth firmware of AVIC-Z110BT for the first time. Access the Pioneer website to check your phone’s compatibility. If your phone is on the list and you wish to update, manually update the Bluetooth firmware after the automatic upgrade is finished. http://www.pioneerelectronics.
Chapter 05 Instructions for upgrading 5 Touch [Bluetooth Settings]. The “Bluetooth Settings” screen appears. 14 Eject the upgrade microSD card #1 (8 GB) from the SD card adapter. 6 Touch [Firmware update]. The current version is displayed. 7 Confirm the Bluetooth firmware version. Make sure that the current version is 2.50. 15 Insert the upgrade microSD card #2 (2 GB) into the SD card adapter. 16 Insert the upgrade microSD card #2 (2 GB) into the SD card slot. 17 Repeat steps 3 through 6.
Chapter Instructions for upgrading 22 Wait until the upgrade process is complete. A message will appear after the update is complete. 23 Touch [OK]. The message disappears, and the map screen returns. 24 Eject the upgrade microSD card #2 (2 GB). Update is completed. Updating the Bluetooth wireless technology software English 21 Touch [Yes]. Update starts. 05 Access the Pioneer website to check your phone’s compatibility.
Chapter 05 Instructions for upgrading 4 Touch [Settings]. The “Settings Menu” screen appears. 5 Touch [Bluetooth Settings]. The “Bluetooth Settings” screen appears. 6 Touch [Firmware update]. The current version is displayed. 7 Confirm the Bluetooth firmware version. Make sure that the current version is 3.11 or later. 8 If the current version is 3.11 or later, touch [Firmware update]. The message confirming whether or not to start the update will appear.
Chapter Playing a DVD-VR disc 06 Starting procedure 1 Press the MODE button to display the AV operation screen. 2 Insert the disc you want to play into disc-loading slot. The source changes and then playback will start. 2 Audio track indicator Shows the audio track number currently selected. 3 Chapter number indicator Shows the chapter number currently playing. 4 Audio channel indicator Shows the current audio channel type, such as “Mch” (Multi-channel).
Chapter 06 Playing a DVD-VR disc Using the touch panel keys Playback screen (page 1) 1 2 3 b a 9 8 7 6 5 4 Playback screen (page 2) c d e f h p With some discs, the icon 9 may be displayed, meaning that the operation is invalid. 1 c CM Skip/CM Skip d = For details, refer to Using the short-time skip function on page 30. 2 Switches the playback mode = For details, refer to Switching the playback mode on page 30.
Chapter Playing a DVD-VR disc = For details, refer to Using advanced functions on page 31. c Searches for a desired scene and starts playback from a specified time Playing by selecting from the title list You can select and play the title you want from the list. 1 Touch [List] on the playback screen. 2 Scroll the list by dragging items up or down to display the item you want to select. = For details, refer to Searching for a specific scene and starting playback from a specified time on this page.
Chapter 06 Playing a DVD-VR disc 1 Touch [Search] and then touch [Title] (title), [Chapter] (chapter), [Time] (time). is useful to skip commercials on your recorded DVD-VR disc. 2 Touch the keys to input the target number or time and then touch [Enter]. % To skip progressively backward or forward, touch [c CM Skip] or [CM Skip d]. p If no operations are performed after the step changes, skip starts. For titles, chapters ! To select 3, touch [3] and [Enter] in order.
Chapter Playing a DVD-VR disc 3 DVD setup adjustments = For detailed operations, refer to Operation Manual for AVIC-Z140BH. English p With some discs, images may be unclear during slow motion playback. p Reversed slow motion playback is not possible. 06 Using advanced functions % Touch on the “DVD-VR” screen. The “Function” menu appears. 1 2 3 1 Changes the repeat range Each touch of [Repeat] changes the setting as follows: ! Disc: Plays throughout the current disc.
Appendix Troubleshooting Problems in the procedures for updating Symptom Cause Action The upgrade process doesn’t start and the navigation system boots up as usual. An incorrect microSD card has been inserted. Eject the inserted microSD card and insert the correct upgrade microSD card. Upgrade has been already done. Check whether the upgrade was done properly. If the upgrade has not been done yet, consult the nearest authorized service station.
Français 33 Fr
Fr
Français 35 Fr
Fr
Français 37 Fr
Fr
Sommaire Merci d’avoir acheté ce produit Pioneer. Veuillez lire attentivement ces instructions de fonctionnement de façon à savoir comment utiliser votre modèle correctement. ! Les écrans donnés en exemple peuvent être différents des écrans réels. ! Les écrans réels peuvent être modifiés sans préavis suite à des améliorations de performances et de fonctions.
Chapitre 01 Licence, exonération de garantie et limite de responsabilité PRODUIT PIONEER - pour les États-Unis IL S’AGIT D’UN ACCORD JURIDIQUE ENTRE VOUS, L’UTILISATEUR FINAL ET PIONEER ELECTRONICS (USA) INC. (“PIONEER”). VEUILLEZ LIRE ATTENTIVEMENT LES CONDITIONS GÉNÉRALES DE CET ACCORD AVANT D’UTILISER LE LOGICIEL INSTALLÉ SUR LES PRODUITS PIONEER. EN UTILISANT LE LOGICIEL INSTALLÉ SUR LES PRODUITS PIONEER, VOUS CONSENTEZ À RESPECTER LES TERMES DU PRÉSENT ACCORD.
Chapitre Licence, exonération de garantie et limite de responsabilité 3 LIMITE DE RESPONSABILITÉ EN AUCUN CAS, PIONEER NE SERA TENU RESPONSABLE DE DOMMAGES, RÉCLAMATION OU PERTES QUE VOUS AVEZ ENCOURUS (Y COMPRIS ET SANS LIMITATION LES DOMMAGES COMPENSATEURS, ACCESSOIRES, INDIRECTS, SPÉCIAUX, CONSÉQUENTS OU EXEMPLAIRES, PERTES DE PROFITS, PERTES DE REVENUS, VENTES OU AFFAIRES PERDUES, FRAIS, INVESTISSEMENTS OU ENGAGEMENTS EN LIAISON AVEC UNE AFFAIRE, PERTE DE BONNE VOLONTÉ OU DÉGÂTS) RÉSULTANT DE L’UTILIS
Chapitre 01 Licence, exonération de garantie et limite de responsabilité 5 RÉSILIATION Cet Accord reste en vigueur jusqu’à ce qu’il soit résilié. Vous pouvez le résilier à tout moment en détruisant le Logiciel. L’Accord sera résilié également si vous n’en respectez pas les clauses ou les conditions. Lors de cette résiliation, vous acceptez de détruire le logiciel.
Chapitre Licence, exonération de garantie et limite de responsabilité 2 CLAUSE DE NON-RESPONSABILITÉ Le Logiciel et sa documentation vous sont fournis sur une base “EN L’ÉTAT”.
Chapitre 01 Licence, exonération de garantie et limite de responsabilité Certains États n’autorisent pas certaines exclusions de responsabilité ou limitations de dommages, et dans cette mesure, la limitation d’exclusion ci-dessus peut ne pas s’appliquer à vous.
Chapitre Licence, exonération de garantie et limite de responsabilité DISPOSITIONS EN MATIÈRE DE SÉCURITÉ CERTAINES JURIDICTIONS N’AUTORISENT PAS L’EXCLUSION DES DOMMAGES OU LIMITE DE RESPONSABILITÉ, LES LIMITATIONS ET EXCLUSIONS CI-DESSUS, DANS LA MESURE OÙ ELLES SONT INTERDITES PAR LA LOI EN VIGUEUR, PEUVENT DONC NE PAS S’APPLIQUER À VOUS. VOS DROITS SPÉCIFIQUES PEUVENT VARIER D’UNE JURIDICTION À L’AUTRE.
Chapitre 02 À propos de la base de données À propos des données de la base de données de carte ! Les modifications relatives aux routes, rues/autoroutes, terrains, constructions et autres éléments avant/pendant la période de développement peuvent ne pas êtres prises en compte dans cette base de données. Et bien sûr, les modifications survenant après cette période ne sont pas prises en compte dans la base de données.
Chapitre Précautions Modèles à mettre à jour Ce produit peut mettre à jour le programme logiciel et la base de données des modèles suivants : ! AVIC-Z110BT ! AVIC-Z120BT ! AVIC-X920BT ! CNSD-110FM ! CNSD-210FM p Dans ce manuel, CNSD-110FM indique le système de navigation qui a été mis à niveau à l’aide du logiciel de mise à niveau CNSD-110FM. p Dans ce manuel, CNSD-210FM indique le système de navigation qui a été mis à niveau à l’aide du logiciel de mise à niveau CNSD-210FM.
Chapitre 03 Précautions ! Les informations supplémentaires, les alternatives et les autres remarques sont présentées dans le format suivant : par ex.) p Si le domicile n’a pas encore été mémorisé, réglez d’abord son emplacement. ! Les fonctions des autres touches sur le même écran sont indiquées par la marque # au début de la description : par ex.) # Si vous touchez [OK], l’entrée est supprimée. ! Les références sont indiquées comme suit : par ex.
Chapitre Précautions 3 Téléchargez des modes d’emploi, commandez des catalogues de produits, recherchez de nouveaux produits, etc. 4 Recevez une notification des mises à niveau de logiciel et des mises à jour de logiciel. Droits d’auteur Les noms des sociétés privées, des produits ou de toute autre entité décrite ici sont des marques déposées ou des marques commerciales de leur propriétaire respectif.
Chapitre 04 Fonctions activées ou désactivées par la mise à niveau Si vous mettez à niveau le système de navigation en utilisant ce produit, celui-ci présentera les modifications suivantes. Groupe 1 : AVIC-Z110BT Groupe 2 : CNSD-110FM, AVIC-Z120BT ou AVIC-X920BT Groupe 3 : CNSD-210FM 1 : Fonctions et opérations modifiées par la mise à niveau Fonctions de navigation Fonction de la carte Groupe 1 Groupe 2 Groupe 3 L’icône Voice affichée sur l’écran de la carte cesse d’apparaître.
Chapitre Fonctions activées ou désactivées par la mise à niveau Fonctions de navigation Paramètres Navigation Paramètres carte Paramètres Bluetooth Autres fonctions Groupe 1 Groupe 2 Groupe 3 “Tension d’alimentation” sur l’écran “Statut GPS” cessera d’apparaître. 1 — — Vous serez en mesure d’activer ou désactiver le bip sonore émis lorsque la reconnaissance vocale démarre. p Le réglage est disponible sur l’écran “Paramètres de volume”.
Chapitre 04 Fonctions activées ou désactivées par la mise à niveau Groupe 2 Groupe 3 Le design de l’écran de la source AV et la marche à suivre des opérations seront modifiés. = Pour en savoir plus sur les opérations, reportez-vous à la page 62, Lecture d’un disque DVD-VR. p Même après la mise à niveau de votre système de navigation, le syntonisateur HD Radio™ doit être connecté.
Chapitre Fonctions activées ou désactivées par la mise à niveau 04 p Les fonctions suivantes ne sont disponibles que pour AVIC-Z140BH et AVIC-X940BT. Même si vous mettez à niveau votre système de navigation, ces fonctions ne seront pas disponibles.
Chapitre 04 Fonctions activées ou désactivées par la mise à niveau Définition des éléments à supprimer et initialiser par mise à jour Les données et les réglages suivants seront effacés et ramenés aux valeurs par défaut. Les autres éléments seront conservés. Toutefois, certains éléments ne figurent pas dans la liste, car la valeur de réglage peut être facilement récupérée par les utilisateurs, par exemple, la dernière position du curseur sur l’écran de la carte.
Chapitre Instructions pour la mise à jour Processus de mise à niveau du système de navigation j 2 Obtenez le mot de passe pour authentification. = Pour les détails, reportez-vous à cette page, Obtention du mot de passe pour authentification. j 3 Mettez à niveau le programme logiciel de votre système de navigation. = Pour en savoir plus sur les opérations, reportez-vous à la page suivante, Mise à niveau du programme logiciel et de la base de données de la carte.
Chapitre 05 Instructions pour la mise à jour p Si vous ne disposez pas d’un ordinateur connecté à Internet pour l’émission en ligne du mot de passe, veuillez contacter votre revendeur Pioneer Electronics autorisé ou appelez les sociétés figurant dans “la page 49, Service après vente pour les produits Pioneer”. 1 Accédez au site web suivant pour émettre votre numéro de passe. http://www.pioneernavigationupdate.com Au Canada: http://www.pioneernavigationupdate.
Chapitre Instructions pour la mise à jour 6 Entrez le mot de passe que vous avez obtenu pour authentification puis touchez [OK]. 05 1 Appuyez sur le bouton HOME pour afficher l’écran “Menu supérieur”. 2 Touchez [Config.]. L’écran “Menu Paramètres” apparaît. 4 Touchez [Infos sur services]. L’écran “Ecran d’informations sur les services” apparaît. Un message confirmant le redémarrage du système de navigation s’affiche. 7 Touchez [OK]. Le système de navigation redémarre puis l’installation commence.
Chapitre 05 Instructions pour la mise à jour Mise à jour du logiciel de technologie sans fil Bluetooth (pour AVIC-Z110BT) p Cette description est pour les utilisateurs mettant à jour le microprogramme Bluetooth de AVIC-Z110BT pour la première fois. Accédez au site Web de Pioneer pour vérifier la compatibilité de votre téléphone.
Chapitre Instructions pour la mise à jour 11 Patientez jusqu’à ce que le processus de mise à niveau se termine. Un message apparaîtra une fois la mise à jour terminée. 05 20 Assurez-vous que la version actuelle du microprogramme Bluetooth est 3.10 et que la nouvelle version du microprogramme Bluetooth est 3.24. Français 12 Touchez [OK]. Le message disparaît et l’écran de la carte est rétabli. 13 Éjectez la carte microSD #1 (8 Go) de mise à niveau.
Chapitre 05 Instructions pour la mise à jour Mise à jour du logiciel de technologie sans fil Bluetooth Accédez au site Web de Pioneer pour vérifier la compatibilité de votre téléphone. Si votre téléphone figure sur la liste et que vous souhaitez effectuer la mise à jour, procédez à la mise à jour manuelle du microprogramme Bluetooth une fois la mise à niveau automatique terminée. http://www.pioneerelectronics.com Au Canada http://www.pioneerelectronics.
Chapitre Instructions pour la mise à jour 05 11 Patientez jusqu’à ce que le processus de mise à niveau se termine. Un message apparaîtra une fois la mise à jour terminée. Français 12 Touchez [OK]. Le message disparaît et l’écran de la carte est rétabli. 13 Éjectez la carte microSD #2 (2 Go) de mise à niveau. La mise à jour est terminée.
Chapitre 06 Lecture d’un disque DVD-VR p Cette fonction n’est disponible que pour AVIC-Z110BT mis à niveau au moyen de CNSD-110FM, CNSD-210FM ou ce produit. Vous pouvez lire un disque DVD-VR (format d’enregistrement vidéo DVD) à l’aide du lecteur intégré du système de navigation. Cette section décrit le fonctionnement des disques DVD-VR. Lecture de l’écran 123 4 5 6 8 a Procédure de départ 1 Appuyez sur le bouton MODE pour afficher l’écran de fonction AV.
Chapitre Lecture d’un disque DVD-VR 06 Utilisation des touches de l’écran tactile Écran de lecture (page 1) Français 1 2 3 b a 9 8 7 6 5 4 Écran de lecture (page 2) c d e f h p Pour certains disques, l’icône 9 peut s’afficher, indiquant que l’opération est invalide. 1 c Saut/Saut d = Pour en savoir plus, reportez-vous à la page 65, Utilisation de la fonction saut court. 2 Change le mode de lecture = Pour en savoir plus, reportez-vous à la page 65, Changement du mode de lecture.
Chapitre 06 Lecture d’un disque DVD-VR = Pour en savoir plus, reportez-vous à cette page, Lecture à partir de la sélection d’une liste de titres. 8 Passe à la page suivante des touches de l’écran tactile 9 Change l’affichage Si vous touchez [Aff.
Chapitre Lecture d’un disque DVD-VR Recherche d’une scène particulière et reprise de la lecture à un moment précis 1 Touchez [Rech] puis [Titre] (titre), [Chapitre] (chapitre), [Heure] (temps). 2 Touchez les touches pour saisir le numéro ou le temps visé, puis touchez [Entrer]. Changement du mode de lecture Deux méthodes s’offrent à vous pour lire des disques DVD-VR : Original (original) et Liste lect. (liste de lecture). p Les titres créés avec des enregistreurs DVD sont appelés originaux.
Chapitre 06 Lecture d’un disque DVD-VR % Touchez [r] pendant la lecture. Chaque fois que vous touchez [r], vous avancez d’une image. Pour retourner à la lecture normale, touchez [f]. 1 2 3 p Avec certains disques, il est possible que les images ne soient pas nettes en lecture image par image. Lecture en ralenti Cette fonction vous permet de ralentir la vitesse de lecture. 1 Touchez de manière prolongée [r] jussoit affiché pendant la lecqu’à ce que ture.
Annexe Dépannage Problèmes dans les procédures de mise à jour Causes possibles Action Le processus de mise à jour ne démarre pas et le système de navigation s’initialise comme d’habitude. Une carte microSD incorrecte a été insérée. Éjectez la carte microSD et insérez la bonne carte microSD de mise à niveau. La mise à niveau a déjà été effectuée. Vérifiez si la mise à niveau a été correctement effectuée. Si elle n’a pas encore été effectuée, communiquez avec le centre de service agréé le plus proche.
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD.