Owner manual
Watching TV 06
21
En
English
Changing channels
Use the remote control or the control panel on the right-hand side
of the plasma television to change channels.
• Before operating with the remote control unit, make sure to select
the TV mode using its
SELECT
button. See
Controlling other
equipment using the supplied remote control unit
on page 68.
Switching between the TV and DTV modes
• Press INPUT on the plasma television or TV/DTV on the remote
control unit to select the DTV or TV input mode.
Using P+/P– on the remote control unit
• Press P+ to increase the channel number.
• Press P– to decrease the channel number.
Note
• CHANNEL +/– on the plasma television operates the same as
P+/P–.
• P+/P– cannot pick up channels that are set to skip. For Channel
Skip, see steps 13 and 14 under Setting up analogue TV channels
manually on page 26.
•When in DTV mode, P+/P– cannot pick up digital channels that
are set to skip or not registered as favourites (with the Favourite
function set to “On”). See Customizing channel related settings
on pages 40 and 41.
Using 0 to 9 on the remote control unit
• Select channels directly by pressing buttons 0 to 9.
For example:
Press 2 to select channel 2 (one-digit channel).
Press 1 then 2 to select channel 12 (two-digit channel).
While in DTV mode, press 1, 2 and 3 to select channel 123 (three-
digit channel).
Note
• In standby, when you press 0, the power turns on and images
come from the INPUT 1 source. Or, when you press any button
from 1 to 9, TV images display.
Tuning to your favourite (analogue)
channels
If you have registered your favourite (analogue) channels, selecting
from the registered list may be the easiest way to tune to those
channels.
1 While watching analogue broadcasts, press ENTER to call
up the Favourite Channel List.
2 Select a favourite channel to tune in (/, / then
ENTER).
• Press RETURN to exit the Favourite Channel List.
Note
• You can register up to 16 analogue channels as your favourite
channels. For the registration, see steps 13 and 14 under Setting
up analogue TV channels manually on page 26. Make sure to
select “Yes (Listed)” in step 14.
1 2 3
4 5 6
7 8 9
PC
0
INFO
INPUT 5
TV/DTV
SELECT
TV STB
DVD/
DVR
VCR
SOURCE
P
8
AAA
STEREO
10:00
STANDARD
FULL
Channel display
01
02
03
04
05
06
07
08
*****
*****
*****
*****
*****
*****
*****
*****
09
10
11
12
13
14
15
16
*****
*****
*****
*****
*****
*****
*****
*****
Favourites