Owner manual

Watching TV 06
23
En
English
Using the multiscreen functions
• Before operating with the remote control unit, make sure to select
the TV mode using its
SELECT button. See Controlling other
equipment using the supplied remote control unit
on page 68.
Splitting the screen
Use the following procedure to select 2-screen or picture-in-picture
mode.
Note
• Displaying a split screen for a long period of time, or for shorter
periods of time everyday, may result in image retention.
1Press c to select the display mode.
Each time you press c, the display mode is switched among 2-
screen, picture-in-picture, and single-screen.
• In 2-screen or picture-in-picture mode, press to switch the
position of the two screens shown.
The left screen (in the 2-screen mode) or the larger screen (in the
picture-in-picture mode) is the active screen which will be
indicated by “
z ”. The user is allowed to operate picture and sound.
• In picture-in-picture mode, press to move the position of the
small screen anti-clockwise.
2 To select the desired input source, press the appropriate input
source button.
If watching TV programmes, press P+/P– to change the channel.
2-screen
Picture-in-picture
Main screen Sub screen
Main screen Sub screen
INPUT 5
TV/DTV
P