Owner manual

Setting up08
36
En
Listening to audio from the sub screen
using headphones
With headphones connected, you can listen to audio coming from
the sub screen when in the 2-screen or picture-in-picture mode;
audio coming from the main screen is output from the speakers. To
use this function, follow the procedure below.
1 Press HOME MENU .
2 Select “Sound” (
/ then ENTER ).
3 Select “Headphone Output” (
/ ).
4 Select the desired parameter (
/ ).
5 Select “Sub Volume” (
/ ).
6 Select the desired volume level (
/ ).
7 Press
HOME MENU to exit the menu.
Note
• To adjust the volume for headphones after selecting “Sub”,
always use the menu item (shown in the procedure) no matter
whether the screen is in the single, 2-screen, or picture-in-
picture mode. When the screen is in the single mode with “Sub”
selected, audio coming from the screen is output from speakers
even with headphones connected.
Power Control
Power Control provides convenient functions for power saving.
Energy Save
You may use one of the three Energy Save modes to save power
consumption.
1 Press HOME MENU.
2 Select “Power Control” (
/ then ENTER).
3 Select “Energy Save” (
/ then ENTER).
4 Select “Mode 1”, “Mode 2”, or “Picture Off” (
/ then
ENTER).
5 Press HOME MENU to exit the menu.
Note
• When you change the Energy Save mode, you may notice a
change in the panel sound. This is normal.
• The Energy Save function can maintain efficiency of the screen
for a long period of time. Setting the Energy Save function to
“Mode 1” is recommended in order to maintain the efficiency of
the screen for a long period of time.
Item Description
Main
(default)
Audio coming from the main screen is output
from the PHONES output terminal
Sub When in the 2-screen or picture-in-picture
mode, audio coming from the sub screen is
output from the PHONES output terminal
Sound Effect
Headphone Output
Sub Volume
30
Main
Energy Save
Selections Off Does not decrease the picture
brightness
Mode 1 Slightly lowers power consumption
while slightly suppressing the
brightness drop level
Mode 2 Decreases the picture brightness
and lowers power consumption
Picture Off Deactivates the screen to save
power. To restore the screen
display, press any button other
than i +/i – and e.
This setting is not memorized by
the system.