Owner manual

Useful adjustment settings11
54
En
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can
change the brightness of the grey side masks that appear at both
sides of the screen.
1 Press HOME MENU.
2 Select “Option“ (
/ then ENTER).
3 Select “Side Mask“ (
/ then ENTER).
4 Select “Brightness Sync.” (
/ ).
5 Select the desired parameter (
 /  ).
Important
• The “Auto” setting adjusts the brightness of the side masks
according to the brightness of the screen and can reduce the
possibility of image retention.
6 Press HOME MENU to exit the menu.
Room Light Sensor
This function automatically adjusts the brightness of the display
panel in accordance with the brightness level of the viewing area.
For details, use the following procedure.
1 Press HOME MENU.
2 Select “Option” (
/ then ENTER).
3 Select “Room Light Sensor” (
/ then ENTER).
4 Select “On” or “Off” (
/ then ENTER).
5 Press HOME MENU to exit the menu.
Note
• This function is disabled when “OPTIMUM” is selected on the
“AV Selection” menu.
• This function is not available when PC signals are received.
• As this function automatically optimizes image quality, the
process in which image settings such as brightness and tint
gradually change may be seen on the screen. This is not a
malfunction.
Blue LED Dimmer
You can adjust the brightness of the POWER ON indicator
depending on the brightness level of the viewing area. When “Auto”
is selected, the brightness of the indicator changes to “High”, “Mid”
or “Low” to match the brightness level of the viewing area.
1 Press HOME MENU.
2 Select “Option”
(/ then ENTER).
3 Select “Blue LED Dimmer”
(/ then ENTER).
4 Select “Auto”, “High”, “Mid” or “Low”
(/ then ENTER).
5 Press HOME MENU to exit the menu.
Orbiter
This function automatically shifts the image little by little to reduce
the occurrence of the burning.
1 Press HOME MENU.
2 Select “Option”
(/ then ENTER).
3 Select “Orbiter”
(/ then ENTER).
4 Select “On”
(/ then ENTER).
5 Press HOME MENU to exit the menu.
• To cancel this function, select “Off” in step 4.
Note
• When the Orbiter function is set to “On”, the image may appear
to drop slightly on the screen.
• This function does not operate when PC signals are received.
Video Pattern
You can display the Video Pattern screen that also helps eliminate
after-image when it occurs.
1 Press HOME MENU.
2 Select “Option”
(/ then ENTER).
3 Select “Video Pattern”
(/ then ENTER).
A confirmation screen appears.
4 Select “Start” ( ENTER).
The Video Pattern screen displays.
Item Description
Fixed
(default)
Always sets the same brightness for the grey side
masks
Auto Adjusts the brightness of the grey side masks
according to the brightness of images
Item Description
On Activates the Room Light Sensor function
Off Deactivates the Room Light Sensor function